Go-Parts
Cart 0
Your cart is empty
Add an item to see it appear here.
Wrenchy
Go-Parts Garage
Expert guides for diagnosing, troubleshooting, and replacing auto parts Expert guides for diagnosing and replacing auto parts
Browse All Articles →
🎬 Helpful Videos 🛍️ Shop This Part

Manifold Absolute Pressure (MAP) Sensor Guide for the 2008-2015 Hyundai Sonata

Understand the symptoms of a failing MAP sensor and find the right aftermarket replacement for your Sonata.

4 minutes to read 2008-2015 Hyundai Sonata
Difficulty
1/5
Est. Time
0.25 hrs
DIY Doable?
✅ Yes
Shop Labor
$50-$100
Used OEM Price
$10-$30
⚠️ Drivable, but... — You can drive, but expect poor performance, bad fuel economy, and you risk damaging other components if you ignore it for too long.
Key Takeaways
  • A bad MAP sensor on a Sonata typically causes a Check Engine Light (P0106), rough idle, and poor gas mileage.
  • Replacement is a simple, 15-minute DIY job with a single 10mm bolt, making it easy to save on labor costs.
  • High-quality aftermarket brands like Delphi, NGK, and Standard Ignition offer reliable performance for much less than OEM parts.
  • Do not clean the sensor; replacement is the recommended and reliable fix.
The Manifold Absolute Pressure (MAP) sensor on your Hyundai Sonata is a critical component for engine performance and fuel efficiency. It constantly measures the pressure inside the engine's intake manifold. This information is sent to the engine's main computer, the ECU, which uses it to determine the engine's load. Based on the MAP sensor's readings, the computer adjusts the amount of fuel injected and the timing of the ignition to ensure the engine runs smoothly and efficiently.

Is Your Sonata's MAP Sensor Failing?

A brand new, clean manifold absolute pressure (MAP) sensor showing the electrical connector and mounting port.
A new MAP sensor is critical for maintaining the correct air-fuel mixture and engine performance in your Sonata.

A faulty Manifold Absolute Pressure (MAP) sensor can cause a range of noticeable problems in your 2008-2015 Hyundai Sonata. Because this sensor directly impacts the air-fuel mixture and ignition timing, a bad sensor can make your car run poorly. Ignoring the symptoms can lead to decreased performance, poor fuel economy, and potentially damage other components 🎬 Watch these 10 warning signs of a bad MAP sensor. like the catalytic converter over time.

Common Symptoms of a Bad MAP Sensor

Comparison between a clean, functional MAP sensor and a failed sensor clogged with oil and carbon deposits.
Left: A healthy MAP sensor with a clear vacuum port. Right: A failed sensor contaminated with oil and carbon, which can cause rough idling and poor fuel economy.
  • Check Engine Light: This is often the first sign. The computer will store a trouble code, commonly P0106, which points to 🎬 See how to fix common engine light codes like P0106. a problem with the MAP sensor's performance or circuit.
  • Poor Engine Performance: You might experience a rough idle, engine hesitation or stumbling during acceleration, and a general lack of power.
  • Reduced Fuel Economy: If the sensor sends incorrect data, the engine may run "rich" (too much fuel), causing you to visit the gas station more often.
  • Black Smoke from Exhaust: An engine running rich can result in black smoke coming from the tailpipe, which is unburnt fuel.
  • Engine Stalling: In some cases, a bad MAP sensor can cause the engine to stall, especially at idle.

Check for Other Issues First

Symptoms like a rough idle or hesitation can also be caused by other problems, such as a vacuum leak in the intake system. It's a good idea to inspect vacuum hoses for cracks or loose connections before replacing the sensor.

Choosing the Right Aftermarket MAP Sensor

A premium aftermarket MAP sensor from a reputable brand like Delphi or NGK in its retail packaging.
Choosing premium aftermarket brands like Delphi or NGK (NTK) ensures your Sonata receives a sensor calibrated to OE standards.

When replacing the MAP sensor on your Sonata, you don't have to buy an expensive OEM part from the dealer. The aftermarket offers a wide range of options that provide a great balance of quality and value. Here's a look at the brands available, grouped into tiers based on general industry reputation.

Premium Aftermarket Brands (Highest Quality & Reliability):

  • Delphi: A well-respected brand that is often an original equipment manufacturer for many car companies. Delphi parts are known for their quality and are tested to meet OE standards.
  • NGK (NTK): While famous for spark plugs, NGK's sensor division, NTK, produces high-quality engine management sensors that are considered top-tier.
  • Standard Ignition (SMP): A long-standing brand in the aftermarket known for producing reliable, professional-grade parts.

Quality Aftermarket Brands (Good Balance of Price & Performance):

  • Walker Products: An established name in fuel systems and engine management parts.
  • Facet: Another brand with a long history of producing aftermarket components.
  • Vemo: Often provides a wide range of sensors and electronic components.

Value-Priced Brands (Budget-Friendly Options):

  • Brands like Global Parts, Skyward, True Tech, and Holstein typically fall into this category. They offer a cost-effective solution, but may not have the same long-term durability or precise calibration as premium brands. For a critical sensor like the MAP, investing in a mid-tier or premium brand is often recommended for peace of mind.

OEM vs. Aftermarket

While some mechanics always recommend OEM parts, many high-quality aftermarket sensors are made by the same companies that supply the original parts. For a simple and common part like the MAP sensor on a Sonata, a reputable aftermarket brand like Delphi or NGK offers OEM-level performance without the high dealer price tag.

Cost of Replacing a Hyundai Sonata MAP Sensor

Part Type Estimated Cost
New Aftermarket MAP Sensor $20 - $106
New OEM MAP Sensor $130 - $200+
Shop Labor $50 - $100
Total DIY Cost (Aftermarket) $20 - $106
Total Shop Cost (Aftermarket) $70 - $206

Frequently Asked Questions (FAQ)

Close-up of the MAP sensor location on a Hyundai Sonata 2.4L engine intake manifold near the throttle body.
On the 2.4L Sonata engine, the MAP sensor is conveniently located on the intake manifold, typically secured by a single 10mm bolt.
Where is the MAP sensor located on my 2008-2015 Sonata?

The MAP sensor is located on the intake manifold. For the 2.4L engine common in these years, it's typically found near the throttle body, held in by a single 10mm bolt. You may need to remove the plastic engine cover to see it clearly.

Can I clean my MAP sensor instead of replacing it?

While some people attempt to clean MAP sensors, it is generally not recommended, especially with harsh chemicals or compressed air, as this can damage the sensitive internal components. Given the low cost of a new aftermarket sensor and the high chance of damaging the old one, replacement is the most reliable solution.

What happens if I ignore a bad MAP sensor?

Continuing to drive with a faulty MAP sensor will lead to persistently poor engine performance, terrible gas mileage, and increased emissions. Over time, running the engine too rich can damage your spark plugs and catalytic converter, leading to much more expensive repairs down the road.

Is this a difficult part to replace myself?

No, this is a very easy DIY job for most people. The sensor is easily accessible and is usually held in by just one 10mm bolt and an electrical connector. The entire job can typically be done in under 15 minutes with basic 🎬 Follow this step-by-step guide to replace your Sonata's sensor. hand tools.

HYUNDAI SONATA CODE P0105 P0106 P0107 P0108 P0109 ENGINE LIGHT ON FIX
HYUNDAI SONATA CODE P0105 P0106 P0107 P0108 P0109 ENGINE LIGHT ON FIX
10 Warning Signs of a Bad MAP Sensor You Should Never Ignore
10 Warning Signs of a Bad MAP Sensor You Should Never Ignore
SYMPTOMS OF A BAD MAP SENSOR
SYMPTOMS OF A BAD MAP SENSOR
Sonata MAP Sensor Replacement (Hyundai 2009 - 2015)
Sonata MAP Sensor Replacement (Hyundai 2009 - 2015)
How to clean or replace the MAP Sensor on a 2013 Hyundai Sonata GLS.
How to clean or replace the MAP Sensor on a 2013 Hyundai Sonata GLS.

Technical Specifications

OEM Part Numbers: 39300-2G000 39300-38100 39300-38200 39300-2B000

The MAP sensor for the 2008-2015 Sonata is typically a 3-pin or 4-pin sensor that mounts directly to the intake manifold with a single bolt and an O-ring seal. Part numbers can vary based on engine (2.4L vs 3.3L V6) and model year, so always verify fitment.

Wrenchy
Article researched & written by
Go-Parts' AI research assistant. Every article is backed by live web research, verified OEM data, and real technician knowledge — so you get accurate, up-to-date information you can trust.
Meet Wrenchy → Updated Jun 1, 2026

The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.

Year Coverage
This article covers the Manifold Absolute Pressure Sensor for:
  • Hyundai Sonata: 20082009201020112012201320142015
In this article
🎬 Helpful Videos
Jump to ▴

Email This Guide

We'll send you a link to this article so you can read it later or share it.

Added to cart · Part