Chrysler 200 Turn Signal Switch Guide for 2011-2017 Models
Having turn signal problems in your 2011-2017 Chrysler 200? Here’s what you need to know before you replace the switch.
- First, check your bulbs and fuses; a fast-blinking signal often means a burnt-out bulb, not a bad switch.
- This is a multi-function switch; if headlights or wipers also fail, the switch is the likely culprit.
- You MUST match the new switch's features (auto headlights, fog lights) to your car's original build to avoid new electrical problems.
- Replacement is DIY-friendly and does not require removing the steering wheel, making it a good way to save on labor costs.
Is Your Turn Signal Switch Failing?
A bad turn signal switch in your Chrysler 200 can cause confusing and dangerous problems. Before you assume the switch is bad, check the simple things first: make sure your turn signal bulbs are working and check the fuse. 🎬 Watch this quick guide to locating your turn signal fuses. If those are fine, the switch itself is the next likely culprit. Symptoms often go beyond just the turn signals.
Common Symptoms of a Bad Switch:
- Turn signals don't work at all, or only work on one side.
- Signals light up but don't flash.
- You have to manually hold the lever in place to keep the signal blinking.
- The signal doesn't cancel automatically after you complete a turn, or it cancels while you are still turning.
- Other controls on the stalk fail, such as the headlights or high beams. This is a strong sign the entire multi-function switch is faulty.
Electrical Gremlins
Some owners have reported strange electrical issues, like the windshield wipers activating with the turn signal. In other cases, a complete failure of the turn signals, horn, and steering wheel buttons has occurred after water damage, suggesting a deeper electrical problem. If you are experiencing multiple, unrelated electrical issues, it's wise to have the car's Body Control Module (BCM) and wiring checked by a professional.
Choosing the Right Aftermarket Part
When shopping for a new aftermarket switch, you will find a wide range of prices. This is because different Chrysler 200 trim levels have different features on the switch, such as controls for automatic headlights or fog lights. It is critical to buy the switch that matches your car's original features.
Common Ordering Mistake
Installing a switch with features your car doesn't have (like putting an 'Auto Headlight' switch in a car without that option) can cause other systems, like your interior courtesy lights, to stop working correctly. Always match the new part to your vehicle's specific trim and features. If you are unsure, use your VIN to confirm the correct part.
Aftermarket Brand Quality: Standard Ignition
Standard Motor Products (SMP), the company behind the Standard Ignition brand, is a well-regarded manufacturer in the automotive industry. Their parts are often trusted by professional technicians and are designed to meet or exceed original equipment (OE) specifications. However, real-world experiences can vary. Some user reviews for aftermarket switches, including some from reputable brands, mention a lighter or less durable feel compared to the original Mopar part. In some cases, users have reported fitment issues with electrical connectors or mounting points on other vehicle applications, so careful installation is key. For a part that gets used every time you drive, balancing cost with quality is important.
Cost to Replace a Chrysler 200 Turn Signal Switch
The cost can vary significantly based on the part you choose and who does the labor. The replacement is straightforward enough for many DIYers, which can save you a lot of money.
| Item | Estimated Cost |
|---|---|
| New Aftermarket Part | $117 - $765 |
| Shop Labor | $100 - $180 |
| Total Professional Replacement | $217 - $945 |
Frequently Asked Questions
Is replacing the turn signal switch a DIY job?
Yes, for many people it is. The process on the 2011-2017 Chrysler 200 is not very difficult. You need to remove the plastic covers around the steering column, which is usually held by a few Torx screws. After that, you disconnect the electrical plugs, remove one more screw holding the switch, and pull the old switch out. 🎬 Watch this step-by-step walkthrough of the switch replacement process. You do not need to remove the steering wheel or airbag. The entire job can take less than an hour with basic tools 🎬 See how to swap the switch on a similar Dodge Avenger. like a Torx driver set.
Are there any recalls for the turn signal switch on the Chrysler 200?
No, there are no specific recalls for the turn signal switch on the 2011-2017 Chrysler 200. There have been other electrical recalls for these vehicles, such as for the Power Distribution Center on some 2015 models or the Occupant Restraint Control module on 2011-2014 models, but none target this specific part.
How do I know if it's the switch or just a bad bulb?
A common sign of a bad bulb is 'hyperflashing,' where the turn signal blinks much faster than normal on one side. If the signal doesn't work at all and the bulb filament looks intact, you can try swapping the bulb with the one from the working side to see if the problem follows the bulb. If both bulbs are good and the fuse is fine, but the signal still doesn't work, the problem is more likely the switch or wiring.
Why is there such a big price range for the same part?
The wide price range ($117.47 - $764.44) is due to the different functions included on the switch. A base model Chrysler 200 without fog lights or automatic headlights uses a simpler, less expensive switch. A top-trim model with all the features requires a more complex and more expensive switch. You must buy the one that matches the options your car was built with.
Helpful Videos
Technical Specifications
OEM Part Numbers: 5183952AA 5183952AB 5183952AC 5183952AD 5183952AE 5183952AF 68015101AG 68041485AD
Column-mounted multi-function switch controlling turn signals, headlights, and high beams. May also include controls for fog lights and automatic headlights depending on vehicle trim level.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Chrysler 200:
- 🎬 Helpful Videos
- 🛍️ Shop This Part
- Is Your Turn Signal Switch Failing?
- Common Symptoms of a Bad Switch:
- Electrical Gremlins
- Choosing the Right Aftermarket Part
- Common Ordering Mistake
- Aftermarket Brand Quality: Standard Ignition
- Cost to Replace a Chrysler 200 Turn Signal Switch
- Frequently Asked Questions
- 🎟️ Get 5% Off