A Guide to the Engine Oil Pressure Switch on a 2014-2015 Nissan Rogue Select
Seeing the oil light on your dash? It might just be this small, easy-to-replace switch.
- Always check your engine oil level first if the oil light comes on.
- It is unsafe to drive with the oil pressure light on; the engine could be at risk of severe damage.
- The OEM part number is 25240-4M40E, and quality aftermarket replacements are a cost-effective option.
- This is a very DIY-friendly repair that can be done in about an hour with basic tools.
Is Your Oil Light On? Understanding the Signs of Failure
A bad oil pressure switch can mimic the signs of a major engine problem, but it's often a simple fix. The first step is to check your oil level with the dipstick to make sure it's not actually low. If the oil level is fine, the switch itself is the next logical suspect. Here are the common symptoms of a failing switch on your Rogue Select:
- Oil Warning Light: The most common sign is the red oil pressure light on your dashboard. It might stay on constantly, or it could flicker on and off, especially at idle or during turns.
- Check Engine Light: A faulty switch can also trigger the Check Engine Light. If you scan the codes, you will likely find P0520, which points to a problem in the oil pressure sensor circuit. 🎬 See how to diagnose a P0520 circuit malfunction code.
- Visible Oil Leaks: The switch itself can develop leaks over time. You may notice oil residue on the sensor or drips on the ground below the passenger side of the engine.
Never Ignore the Oil Pressure Light
Even if you suspect a bad sensor, you should not drive the vehicle when the oil pressure light is on. It is impossible to know for sure if you have a faulty sensor or a genuine lack of oil pressure, which can destroy your engine in minutes. Always stop the vehicle and check the oil level immediately.
Choosing the Right Aftermarket Oil Pressure Switch
For a simple part like an oil pressure switch, an aftermarket replacement is a perfectly good choice for your Rogue Select. There are no complex electronics involved, and quality aftermarket brands produce reliable switches. OEM quality is excellent, but you can save money without sacrificing reliability by choosing a good aftermarket part. Here’s a breakdown of the available brands:
- Top Tier (Good Quality & Reputation): Brands like Standard Ignition (SMP) and Beck Arnley are well-regarded in the industry. Beck Arnley often sources parts from the original equipment manufacturers, giving you OEM quality at an aftermarket price. These are solid choices for peace of mind.
- Mid-Tier (Reliable Value): Brands like Vemo and Facet offer a good balance of price and quality. They are established European manufacturers and provide a dependable alternative to more expensive brands.
- Economy Tier (Budget-Friendly): Brands like Global Parts are often the most affordable. While they can be a good option for a tight budget, they may not have the same long-term durability or stringent quality control as higher-tier brands.
How Much Does a Replacement Cost?
Replacing the oil pressure switch is an affordable repair, especially if you do it yourself. The part itself is inexpensive, and labor is minimal.
| Part/Service | Estimated Cost |
|---|---|
| New OEM Switch | $25 - $40 |
| New Aftermarket Switch | $15 - $125 |
| Shop Labor | $100 - $150 |
| Total Professional Replacement | $125 - $190 |
DIY Installation is Feasible
Replacing this switch is a straightforward job that most DIY mechanics can handle 🎬 Watch: How to replace the switch using basic hand tools. in about an hour. The switch is located on the lower, passenger side of the engine block. You will need to safely raise the vehicle, remove the passenger-side front wheel, and take off a small plastic splash guard to access it. After unplugging the connector, the old switch unscrews with a 1 1/16" or 28mm socket. 🎬 Watch this step-by-step replacement guide for Nissan and Infiniti models. Torque the new switch to 11 ft-lbs.
Frequently Asked Questions
Is there a recall on the oil pressure switch for my Rogue Select?
No, there are no recalls or common Technical Service Bulletins (TSBs) from Nissan for a faulty engine oil pressure switch on the 2014-2015 Rogue Select.
What is the difference between an oil pressure switch and a sensor?
A switch is a simple on/off device that only triggers the warning light at a set low-pressure point. A sensor (or sending unit) is more advanced and can provide a variable reading to a pressure gauge on the dashboard. Your Rogue Select uses a simple switch.
My oil light came on, but my oil level is full. What should I do?
If the oil level is correct, the most likely cause is a faulty oil pressure switch. However, it could also indicate a problem with the oil pump or a blockage in the system. It is safest to have the vehicle towed to a mechanic to have the actual oil pressure tested with a mechanical gauge.
Will a bad oil pressure switch cause my engine to run poorly?
Generally, no. A faulty switch itself will not affect engine performance. However, if the switch fails to warn you of a real low-oil-pressure problem, the resulting engine damage will cause poor performance, knocking noises, and eventually, complete failure.
Helpful Videos
Technical Specifications
OEM Part Numbers: 25240-4M40E 25240-4M400
Location: Lower passenger side of engine block. Socket Size: 1 1/16 inch (or 28mm). Torque: 11 ft-lbs.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Nissan Rogue Select: