Dodge Durango 2018-2025 Disc Brake Hardware Kit: A Complete Replacement Guide
Don't let worn or missing brake hardware compromise your Durango's stopping power and safety.
- Always replace your disc brake hardware kit when changing brake pads on your Durango to ensure quiet operation and even wear.
- For 2018-2019 models, be aware of the serious ABS module recall (NHTSA 24V838000) and check if your vehicle is affected.
- Aftermarket hardware from brands like Carlson, Dynamic Friction, and Raybestos offers good quality, often exceeding OEM with stainless steel construction.
- Symptoms like brake noise, pulling, and uneven pad wear can be caused by bad hardware, not just the pads or rotors.
Symptoms of Failing Brake Hardware
Worn or corroded brake hardware can cause problems that are often mistaken for bad brake pads or rotors. If you notice any of these signs with your Durango, it might be time to inspect the hardware.
🎬 Watch: Full front and rear brake replacement walkthrough- Brake Noise: Squealing, rattling, or clicking sounds when you apply or release the brakes can point to loose or failing hardware. The clips lose their tension and allow the pads to vibrate.
- Uneven Brake Pad Wear: If you find one pad is much more worn than another, it's often because the hardware is rusted or seized. This prevents the pads from moving freely in the caliper bracket.
- Brakes Sticking or Dragging: When hardware corrodes, it can cause a brake pad to stay in contact with the rotor even when you're not braking. This can cause a pull to one side, a burning smell, and excessive heat from the wheel.
Recall and TSB Information
For 2018-2019 Dodge Durango models, a significant recall (NHTSA 24V838000) was issued for a malfunctioning Anti-lock Brake System (ABS) module. This could cause brake lights to stay on, disable stability control, and even allow the vehicle to shift out of park without the brake pedal being pressed. While not directly related to the disc brake hardware kit itself, it is a critical safety issue for these model years. A related TSB (#9004548RevB) also addresses brake lights staying on. Always check with a dealer to see if your VIN is affected.
Choosing the Right Aftermarket Hardware Kit
When you replace your Durango's brake pads, you should always install a new hardware kit. Reusing old, rusty, or heat-fatigued clips is a common mistake that leads to noise and poor performance. For a heavy SUV like the Durango, quality hardware is essential.
OEM vs. Aftermarket Quality
For a simple part like a hardware kit, aftermarket options are often just as good as, or even better than, the original Mopar parts. Many aftermarket kits use stainless steel, which offers superior corrosion resistance compared to the standard plated steel sometimes used in original parts. Given the low cost of these kits, there is little reason to pay a premium for a dealership part unless you are performing a warranty repair.
Aftermarket Brand Tiers
The brands available offer a good range of quality and price. All are considered reliable choices for daily driving.
- Economy/Standard (Carlson, Dynamic Friction): These brands provide reliable, OE-equivalent hardware that gets the job done. They are a cost-effective choice for a standard brake job and are perfectly suitable for most Durango owners.
- Premium (Raybestos): Raybestos has a long-standing reputation in the brake industry. Their hardware kits are often considered a step up, sometimes featuring better materials or coatings for enhanced durability, especially in regions with harsh winters and road salt. However, some recent user feedback suggests a potential decline in quality, so it's wise to check recent reviews.
Cost of Disc Brake Hardware Kits for 2018-2025 Dodge Durango
| Part Type | Price Range (Per Axle) |
|---|---|
| New Aftermarket (Carlson, Dynamic Friction, Raybestos) | $12.75 - $29.40 |
| New OEM (Mopar) | $35 - $60 |
Frequently Asked Questions
Do I really need to replace the hardware with every brake job?
Yes. The old hardware has been exposed to thousands of heat cycles, moisture, and road salt. The clips lose their tension, and corrosion can build up. Reusing them is the number one cause of brake noise and uneven wear after a brake job. For the low cost, it's cheap insurance for a quiet, effective brake system.
What is included in a typical disc brake hardware kit?
A kit for one axle (front or rear) typically includes all the necessary metal clips and springs for both the driver and passenger side brakes. This usually means four to eight clips that fit into the caliper bracket and sometimes anti-rattle springs that attach to the brake pads themselves.
Can I just clean and reuse my old hardware?
While you can try to clean old hardware with a wire brush, it's not recommended. Cleaning doesn't restore the metal's lost spring tension from heat exposure. For a vehicle as heavy as the Durango, having proper tension to prevent pad vibration is critical for quiet operation.
What happens if I don't use the hardware?
Without the hardware clips, the brake pads would sit directly in the caliper bracket. This would cause significant rattling and noise. The pads would also be prone to shifting and binding, leading to rapid and uneven wear, and potentially reduced braking effectiveness.
Helpful Videos
Technical Specifications
OEM Part Numbers: 68157617AA 68157614AA
Kits typically include stainless steel or plated steel abutment clips and anti-rattle springs. Specific kits are required for front and rear axles, and may differ based on standard or heavy-duty/Brembo brake options.
We Have This Part in Stock
The information in this article is provided for general reference and educational purposes only. Vehicle specifications, procedures, and part compatibility can vary by production date, trim level, and region. Always consult your vehicle's factory service manual and verify part numbers before purchasing or performing repairs. Safety-critical components such as airbags, seat belts, and braking systems should be installed by a qualified professional.
- Dodge Durango: