OEM 19 Inch Wheel Cover for 2020-2024 Tesla 3, S, Y

What to look for when buying this part:

• Material: Ensure the material is durable and resistant to cracking or breaking.
• Finish: Check that the finish is smooth and free of defects.
• Fit: Verify that the wheel cover is designed to fit your specific vehicle model and year.
• Appearance: Make sure the wheel cover matches the style of your other wheel covers.

Quality indicators for the available options: | Feature | Used OEM | Refurbished OEM | New Aftermarket | |---|---|---|---| | Originality | Genuine factory part | Genuine factory part | Third-party manufactured | | Condition | May show signs of wear | Restored to like-new condition | Brand new | | Price | Typically the lowest | Mid-range | Can vary widely | | Warranty | Varies by seller | Often offered | Varies by manufacturer |

What's typically included with the part:

• The wheel cover itself.
• Sometimes retaining clips or hardware (check with the seller).

Difficulty level and estimated time:

• Difficulty: Easy
• Estimated Time: 5-15 minutes per wheel cover

Special tools needed (if any):

• Flathead screwdriver (may be helpful for removal)
• Soft cloth or gloves (to protect the wheel cover)

Critical steps and tips:

1. Remove the old wheel cover: Gently pry the old wheel cover off the wheel. Use a flathead screwdriver if necessary, but be careful not to scratch the wheel.
2. Clean the wheel: Wipe down the wheel surface to remove any dirt or debris.
3. Install the new wheel cover: Align the new wheel cover with the wheel and press it firmly into place until it snaps into position.
4. Ensure secure fit: Double-check that the wheel cover is securely attached and does not wobble.

Whether DIY is recommended or professional installation is better:

• DIY is generally recommended, as it is a simple and straightforward process. Professional installation is usually not necessary.

Compare: Used OEM, Refurbished OEM, New Aftermarket

Used OEM:

• Best value option.
• Genuine factory parts, ensuring proper fit and appearance.
• Tested and inspected to meet quality standards.
• Available at significantly lower prices than new parts.

Refurbished OEM:

• Factory parts that have been professionally restored.
• May include new components to improve performance and appearance.
• A good balance between price and quality.

New Aftermarket:

• Brand new parts manufactured by third-party companies.
• Built to meet or exceed original equipment specifications.
• Can be a cost-effective alternative to OEM parts.

Parts commonly replaced or checked at the same time:

• Wheel: Check the wheel itself for damage or bending.
• Tire: Inspect the tire for wear, damage, or proper inflation.
• Wheel studs/lugs: Ensure the wheel studs and lug nuts are in good condition and properly tightened.

Why replacing related parts prevents repeat failures:

• Replacing worn or damaged related parts can prevent stress on the new wheel cover, extending its lifespan and preventing premature failure. For example, a bent wheel can cause a wheel cover to become loose or damaged.

How long this part normally lasts:

• A wheel cover can last for the entire lifespan of the vehicle if properly maintained and not subjected to excessive impact.

Factors that affect longevity:

• Driving conditions (e.g., rough roads, potholes).
• Exposure to harsh weather conditions (e.g., extreme heat, cold, salt).
• Quality of the wheel cover material.
• Proper installation and maintenance.

Budget vs mid-range vs premium options:

• Used OEM: $30 - $75
• Refurbished OEM: $50 - $100
• New Aftermarket: $40 - $90

Labor cost considerations if applicable:

• Installation is typically DIY, so labor costs are minimal. If you choose to have a professional install it, expect to pay $25-$75.

Total job cost estimates:

• DIY: $30 - $100 (depending on the part chosen)
• Professional Installation: $55 - $175 (depending on the part chosen and labor rate)

Known issues for this vehicle's system related to this part:

• Some owners have reported issues with wheel covers becoming loose or falling off, particularly after hitting potholes.
• Check the retaining clips regularly to ensure they are secure.

Any TSBs or common complaints:

• There are no widespread TSBs (Technical Service Bulletins) specifically related to wheel covers on this vehicle, but it's always a good idea to check with your dealer for any updates.

How to confirm proper operation:

• Visually inspect the wheel cover to ensure it is securely attached to the wheel.
• Gently try to wiggle the wheel cover to check for any looseness.
• Take the vehicle for a short test drive and listen for any unusual noises coming from the wheel area.

What to look/listen for to verify it's working correctly:

• The wheel cover should remain securely attached to the wheel during driving.
• There should be no rattling or other unusual noises coming from the wheel area.
• The wheel cover should not interfere with the operation of the wheel or tire.

Q: Will this wheel cover fit my 2023 Tesla Model S?
A: This wheel cover is designed for 2021-2025 Tesla Model S vehicles. Please verify your vehicle's year and model before purchasing.

Q: How do I remove the old wheel cover?
A: Gently pry the old wheel cover off the wheel using a flathead screwdriver or a similar tool. Be careful not to scratch the wheel.

Q: What if the wheel cover doesn't fit properly?
A: Ensure you have the correct wheel cover for your vehicle's year and model. If it still doesn't fit, double-check that it is properly aligned with the wheel before pressing it into place.

Q: Are retaining clips included with the wheel cover?
A: It depends on the seller. Check the product description to see if retaining clips are included. If not, you may need to purchase them separately.

Q: How do I clean the wheel cover?
A: Use a mild soap and water solution to clean the wheel cover. Avoid using harsh chemicals or abrasive cleaners, as they can damage the finish.

OEM Part Numbers:

• Tesla: 1486286-00-A, 1486286-01-A, 148628600A, 148628601A

Fits Years: 2020 2021 2022 2023 2024