Buy Honda CR-V Fender

Honda CR-V Fender Overview

The fender on a Honda CR-V is a crucial component of the vehicle's body, positioned above the wheels to protect the wheel well and enhance the vehicle's appearance. It serves as a shield against road debris, water, and other elements, preventing damage to the vehicle's undercarriage and maintaining its structural integrity. Fenders are typically made from materials like steel or plastic, depending on the model year and trim level. (YouTube)

Over time, fenders can become damaged due to accidents, rust, or wear and tear. Replacing a damaged fender is essential not only for aesthetic reasons but also for safety and vehicle performance. When replacing a fender, it's important to select the correct part that matches the vehicle's year, make, and model to ensure proper fit and function.

Fender Types and Materials

Honda CR-V fenders are available in various types, primarily categorized by their position (left or right) and the model year. The materials used in these fenders vary:

• Steel Fenders: Common in earlier models, steel fenders offer durability but may be prone to rust over time.
• Plastic Fenders: Introduced in later models, plastic fenders are lightweight and resistant to rust but can be susceptible to cracking upon impact. (Honda Automobiles)

For instance, the 2023-2025 Honda CR-V models utilize fenders with part numbers like 60210-3A0-A00ZZ for the passenger side and 60260-3A0-A00ZZ for the driver side . (Honda Parts Now)

Fender Installation Process

Replacing a fender on a Honda CR-V typically involves the following steps: (Reddit)

1. Preparation: Ensure the vehicle is on a flat surface. Loosen the lug nuts on the wheels. Raise the vehicle using a jack and secure it with jack stands. (honda-civic-crv.repair-car.com)
2. Wheel Removal: Remove the wheels to access the fender area.
3. Bumper and Trim Removal: Detach the front bumper cover and any trim pieces that obstruct access to the fender. (CRV Owners Club)
4. Fender Unbolting: Locate and remove all bolts securing the fender to the vehicle's body.
5. Fender Removal: Carefully remove the fender from its position.
6. New Fender Installation: Position the new fender and secure it with the previously removed bolts. (College Hills Honda)
7. Reassembly: Reattach the bumper, trim pieces, and wheels.
8. Final Checks: Ensure all parts are securely fastened and the vehicle is properly aligned.

For a visual guide, you can refer to this detailed video on fender removal and installation: (honda-civic-crv.repair-car.com)

DIY 2017 - 2018 - 2019 - 2020 Honda CRV Fender Removal / Takeout

Fender Clips and Fasteners

During fender replacement, it's essential to inspect and, if necessary, replace any clips or fasteners that secure the fender. For example, the inner fender clip with part number 91501-TRO-003 is compatible with several Honda models, including the CR-V . Using the correct clips ensures a secure fit and prevents rattling or misalignment. (College Hills Honda, OEM Parts Online)

Fender Flare Accessories

Fender flares are accessories that extend the coverage of the fender, providing additional protection against debris and enhancing the vehicle's appearance. For the 2023-2025 Honda CR-V, fender flares are made of durable polypropylene material and are designed to match the texture and color of the factory trim . (College Hills Honda, Honda Automobiles)

Installing fender flares typically involves:

1. Preparation: Clean the area where the fender flares will be attached.
2. Positioning: Align the fender flares with the vehicle's fender.
3. Attachment: Secure the fender flares using the provided clips and fasteners.
4. Final Checks: Ensure the fender flares are securely attached and aligned properly.

For detailed installation instructions, you can refer to the official installation guide:

(College Hills Honda)

Fender Maintenance Tips

To prolong the life of your Honda CR-V's fender and maintain its appearance:

• Regular Cleaning: Wash the fender area regularly to remove dirt and debris.
• Inspect for Damage: Periodically check for signs of rust, cracks, or dents.
• Protective Coatings: Apply a protective wax or sealant to prevent corrosion.
• Prompt Repairs: Address any damage immediately to prevent further issues.

Frequently Asked Questions

Q: What is a fender on a Honda CR-V?

A: The fender is the part of the vehicle's body that surrounds the wheel well, protecting the vehicle from road debris and contributing to its overall appearance.

Q: How do I know if my CR-V's fender needs replacement?

A: Signs that a fender may need replacement include visible rust, dents, cracks, or misalignment with other body panels.

Q: Can I replace the fender myself?

A: Yes, replacing the fender is a feasible DIY project if you have basic automotive repair skills and the necessary tools.

Q: How long does it take to replace a fender on a CR-V?

A: The process typically takes between 2 to 4 hours, depending on the model year and your experience level.

Q: Do I need to remove the bumper to replace the fender?

A: In most cases, yes. Removing the bumper provides better access to the fender bolts and ensures a more straightforward replacement process. (JustAnswer)

Q: Where can I find a replacement fender for my Honda CR-V?

A: Replacement fenders can be found through authorized Honda dealerships, reputable auto parts suppliers, or online marketplaces.

Q: Are there different fenders for different CR-V model years?

A: Yes, fenders vary by model year. It's essential to select a fender that matches your CR-V's specific year and trim level for proper fitment.

Q: What tools do I need to replace a fender on a CR-V?

A: Common tools include a jack and jack stands, socket set, screwdrivers, trim removal tools, and possibly a plastic body pin removal tool. (Reddit)

Q: Can I install fender flares on my CR-V?

A: Yes, fender flares are available for various CR-V models and can be installed to enhance the vehicle's appearance and provide additional wheel well protection. (Honda Automobiles)

Q: How can I maintain my CR-V's fender?

A: Regularly clean the fender area, inspect for damage, apply protective coatings, and address any issues promptly to maintain the fender's condition.

If you need further assistance or information on specific model years or additional accessories, feel free to ask.