Buy Hyundai Tucson Bumper Covers

A bumper cover is the plastic "skin" that you see at the very front or rear of every modern Hyundai Tucson. It hides the metal bumper beam, smooths airflow, holds lights and parking sensors, and helps absorb low-speed knocks. Most Tucson covers are molded from flexible polypropylene (PP) plastic, then painted to match the body. (SEM Products, A&C Plastics, Hyundai Forums, I-CAR Repairability Technical Support)

• A bumper cover (also called a fascia, bumper skin, or shell) is non-structural; the steel or aluminum beam underneath handles crash energy.
• The cover's job is to reduce injury from sharp edges, improve aerodynamics, and give room for fog-lamp, radar, and park-sensor openings. (NHTSA, wholesalehyundaiparts.com)

← scroll table horizontally →

• Hyundai lists PP-TD20 (polypropylene with 20 % talc) for most Tucson covers, giving impact flex and easy recycling. (SEM Products, polyvance.com)
• Some aftermarket "body-kit" skins use PU (polyurethane). PU is tougher in cold weather; PP is lighter and cheaper. (Mr Bodykits, Protolabs)

• A millimeter-wave radar module now sits behind the center grille on 2022-25 models; an uneven or repaired cover surface can mis-aim the beam. Hyundai and I-CAR warn against plastic-welding or excessive filler in that area. (wholesalehyundaiparts.com, I-CAR Repairability Technical Support)
• Corner sonar sensors (parking aid) must "see" through paint no thicker than 200 µm; thick primer can throw false alarms. (OEM Parts Online)
• New U.S. pedestrian-protection rules propose extra head-impact padding inside bumper covers, so later covers may not swap backward. (NHTSA)

• The paint code label sits on the driver-door pillar. Codes like "NS7" (Amazon Gray) or "WW8" (Atlas White) must match for a blend-free look. (Color N Drive)
• PP needs adhesion promoter before primer; sanding with 600-grit avoids swirl marks that can "read through" the topcoat. (SEM Products)

1. Remove eight upper clips and two wheel-arch screws.
2. Unplug fog-lamp, radar, and sensor harnesses.
3. Pull the cover straight forward to clear side brackets; avoid bending.
4. Reverse to install and torque bolts to 5 N·m. A helper keeps paint from scuffing fenders. (Hyundai Forums, Reddit)

• Rinse winter road salt quickly; PP resists rust but metal brackets do not.
• Touch-up rock chips before UV reaches the plastic backing.
• Parking-sensor O-rings crack after 5-6 years-swap when the cover is off. (Hyundai, OEM Parts Online)

• A primed Tucson bumper skin ranges from about $100 to $1,000; paint and labor add $200-$600 at a body shop. (Key Collision Center)
• DIYers often spend $350-$500 using pre-painted mail-order skins plus clip kits. (Reddit, Reddit)
• Insurance may cover OEM or aftermarket parts; confirm deductible vs. part cost.

• PP bumper covers are recyclable and can be ground into pellets for wheel-well liners or battery trays. U.S. EPA data show rising recovery rates for "durable goods" plastics such as bumpers. (EPA NEEPA, US EPA)

Q: What's the difference between a bumper and a bumper cover?
A: The metal bumper beam absorbs crash forces; the cover is the plastic outer shell that gives the SUV its shape and holds trim pieces. (A&C Plastics)

Q: Will a 2021 Tucson bumper skin fit a 2023 model?
A: No. The 2022 redesign changed grille shape and added a larger radar window, so mounting points differ. (wholesalehyundaiparts.com)

Q: Can I repair a cracked cover with plastic filler?
A: Small tears on non-sensor areas can be plastic-welded, but Hyundai advises replacing any cover in front of radar or corner sonar modules. (I-CAR Repairability Technical Support)

Q: Why is my parking sensor beeping after repainting?
A: Excess primer or metallic paint can block ultrasonic waves; sanding back and re-spraying within factory thickness usually fixes it. (OEM Parts Online)

Q: What tools do I need to swap the cover at home?
A: A plastic-clip remover, #2 Phillips bit, 10 mm socket, T-25 Torx driver, and masking tape to protect the fender edges. (Hyundai Forums)

Q: Where do I find my paint code?
A: Look at the left-hand door pillar sticker; the two- or three-letter code sits under "PAINT." (Color N Drive)

Q: Does a bumper cover improve fuel economy?
A: Yes, its smooth shape reduces drag, giving a small mileage gain vs. an exposed metal beam. (NHTSA, A&C Plastics)

Q: Are Tucson covers made from ABS plastic?
A: Hyundai specifies polypropylene; ABS is stiffer and used more in interior trims. (SEM Products, Protolabs)

Q: How long does a painted PP cover last?
A: With normal care, the paint layer can last 8-10 years before fading; the plastic under it remains flexible far longer. (A&C Plastics)

Q: Can I recycle the old cracked cover?
A: Many municipal yards accept PP auto fascia; check local codes or auto-plastic collection programs. (EPA NEEPA)

For deeper reading, consult the Hyundai owner's manual, NHTSA safety updates, and I-CAR repair bulletins.