Buy Kia Sportage Bumper Covers

Kia Sportage bumper covers - also called bumper fascia, bumper skin, or outer bumper panel - protect the metal bumper bar, hide sensors, and shape airflow around the SUV. Modern Sportage covers are molded from flexible polypropylene plastic that springs back from most low-speed taps. (eBay) They bolt on with screws and plastic clips, so a careful DIYer can swap one in about an hour. (YouTube) Front and rear covers are trimmed for cameras, radar, and parking sensors; they must line up with those devices to keep advanced driver-assist features working. (RepairPal.com)

A bumper cover absorbs light bumps, cuts wind drag, and gives the Sportage its signature "tiger face" styling. (Kia) It also channels air to the intercooler or radiator and holds fog lamps or daytime-running lights on certain trims. Because the cover sits far forward, it is the Sportage part most often repaired after parking-lot mishaps or wildlife strikes.

Sportage generations use unique covers:

• 2017-2022 (QL) - Slim grille opening and low-mounted LED strips.
• 2023-2025 (NQ5) - Tall "boomerang" lamps and a split-level grille. (The US Sun)
  Always match the body style (gas, hybrid, or plug-in) because the front under-tray shape is different.

Most covers are painted, primed polypropylene (PP). PP is light, resists corrosion, and can be recycled into new auto parts once shredded and cleaned. (plasticsindustry.org, plasticsindustry.org) High-end trims may add a thermoplastic-olefin (TPO) lower lip for extra flexibility.

• 2023 brought a wider grille and more radar cut-outs for the highway-assist system. (The US Sun)
• A mid-cycle refresh expected for 2026 will square the air intakes but keep PP construction.
• All U.S. passenger vehicles must meet the low-speed impact rule in 49 CFR Part 581, which shapes cover thickness and height. (eCFR)

Scratches, cracked mounting tabs, and torn sensor grommets are the top issues. A deep gouge often exposes gray PP beneath the paint. If energy-absorbing foam or crash brackets bend, replace them along with the cover to keep crash-worthiness. (Amazon)

Light scuffs sand and repaint well, but broken clips or tears weaken the piece. Online marketplace listings show an unpainted front cover around $700, while a body shop usually charges $300-$500 in paint and labor to install and blend the panel. (eBay) Insurance often totals the cover once labor plus paint exceeds 70 % of a new part price.

1. Unbolt the inner-fender screws and under-tray clips.
2. Disconnect fog-lamp, radar, and sensor wires.
3. Pull the cover forward with steady force.
4. Transfer grilles, sensors, and the camera.
5. Align tabs; push until they "click"; reinstall screws. A helper keeps fresh paint from dragging on the ground. (YouTube)

Kia prints the paint code on the driver-side door label; codes like SWP (Snow White Pearl) guide the paint shop. (Paint N Ship) Multi-coat pearls need a clear-coat bake for color match. Touch-up pens work on pencil-tip chips, but anything larger than a coin should be blended across the whole cover for a uniform shine.

Current Sportage covers house:

• Forward collision radar (behind the grille badge)
• Ultrasonic parking sensors (round pucks)
• Corner blind-spot radar (rear cover)
  Mis-aligned sensor bezels can disable automatic emergency braking, a feature the U.S. will mandate on all cars by 2029. (WIRED)

Recycling programs now collect used PP bumper covers, grind them, and turn the pellets into new wheel-liners and trim, keeping over a million pounds of plastic out of landfills each year. (plasticsindustry.org, plasticsindustry.org)

← scroll table horizontally →

*Prices vary by region and finish.

A plastic trim-clip remover, 10 mm socket, torx bits, masking tape, and a helper's hands cover most swaps. A scan tool clears collision-warning fault codes after re-install.

Q: What is a bumper cover?
A: It is the plastic shell that hides the metal bumper bar, gives the SUV its final shape, and helps catch low-speed energy. (eBay)

Q: Is the cover the same as the bumper?
A: No. The bumper is the steel or aluminum beam under the cover. The cover is cosmetic and aerodynamic.

Q: Can I drive with a cracked cover?
A: Legally you can, but cracks may expose sharp edges and can let moisture reach sensors, so replace it soon.

Q: Does a painted cover come ready to install?
A: If you buy one already sprayed in your paint code, yes-just move the trim and bolt it on. (Paint N Ship)

Q: Will a 2022 cover fit a 2024 Sportage?
A: No. The 2023 redesign changed the grille and headlamp positions, so the covers are not interchangeable. (The US Sun)

Q: What is the cover made of?
A: Flexible polypropylene that resists dents and is fully recyclable. (plasticsindustry.org)

Q: How do I find my paint code?
A: Look at the driver-side door jamb sticker; codes like ABP, SWP, or M4R appear next to "PAINT." (Paint N Ship)

Q: Do bumper covers affect airbags?
A: They do not trigger airbags, but mis-aligned radar behind the cover can delay automatic braking. (WIRED)

Q: Is primer required before paint?
A: Most new covers arrive already primed; scuff lightly, clean, then spray color and clear.

Q: Can the old cover be recycled?
A: Yes. Many body shops bundle PP covers for plastic recyclers who turn them into new auto parts. (plasticsindustry.org)

Q: What tools are needed for removal?
A: A 10 mm socket, Phillips screwdriver, trim-clip puller, and torx bit for under-tray screws. (YouTube)