BMW 323i Disc Brake Pad Set Replacement

Semi-Metallic

Optional

Recommended

Optional

Hardware Not Included Original Equipment Pad Material Is Semi-Metallic

Recommended

Optional

Recommended

Hardware Not Included Original Equipment Pad Material Is Semi-Metallic

Hardware Not Included Original Equipment Pad Material Is Semi-Metallic

Recommended

Semi-Metallic Pads Abutment kit included

Semi-Metallic Pads

OE Formulated Friction Material

Ceramic

Recommended

Required Hardware 340-31014 Required Sensor341-31003 (1)

Hardware Not Included Original Equipment Pad Material Is Semi-Metallic

Ceramic

Optional

w/ 312mm Rotors Hardware Not Included Original Equipment Pad Material Is Semi-Metallic

ASM; Semi-Metallic; May require pad wear sensor-check catalog

Requires Wear Sensor - Sold Separately

ASM WITH HARDWARE; Semi-Metallic; May require pad wear sensor-check catalog

Requires Wear Sensor - Sold Separately

Requires Wear Sensor - Sold Separately

Includes Wear Sensor

Semi-Metallic Pads Abutment kit not included

Requires Wear Sensor - Sold Separately

Requires Wear Sensor - Sold Separately

OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

OE Formulated Friction Material

Hardware Included Original Equipment Pad Material Is Semi-Metallic

w/ 338mm Rotors Hardware Included Original Equipment Pad Material Is Semi-Metallic

Rotor Diameter 312mm

Requires Wear Sensor - Sold Separately

OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

Includes Wear Sensor

Requires Wear Sensor - Sold Separately

Hardware Included Original Equipment Pad Material Is Semi-Metallic

ASM; Semi-Metallic; May require pad wear sensor-check catalog

Replaces PGD763M

Semi-Metallic Pads

with 300 (mm) Front Rotor OE Pad Material is Semi-Metallic

OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

Semi-Metallic Pads

Production: 05/01/2007-

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

with 312 (mm) Front Rotor OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

Requires Wear Sensor - Sold Separately

Requires Wear Sensor - Sold Separately

Replaces PGD1171M Replaces PGD1171C

FMSI Pad No. D763; Vented/Solid; 272/275/280/294mm Dia.; 10/19mm Thick; 75mm Center Hole Dia.; Pad Dimensions: 123 x 45 x 17mm

with 338mm Front Rotor Requires Wear Sensor - Sold Separately

ASM WITH HARDWARE; Semi-Metallic; May require pad wear sensor-check catalog

FMSI Pad No. D558; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 151 x 57 x 16mm

Production: 05/01/2007-

Includes Wear Sensor

OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

w/ 312mm Rotors Hardware Included Original Equipment Pad Material Is Semi-Metallic

Requires Wear Sensor - Sold Separately

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

Production: 05/01/2007-

FMSI Pad No. D781; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 150 x 57 x 16mm

Hardware Included Original Equipment Pad Material Is Semi-Metallic

Replaces PGD918M Replaces PGD918C

with 338mm Front Rotor Requires Wear Sensor - Sold Separately

with 312 (mm) Front Rotor OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

Without pad wear sensor Pad Wear Sensor Type None Without abutment clips

Requires Wear Sensor - Sold Separately

w/ 338mm Rotors Hardware Included Original Equipment Pad Material Is Semi-Metallic

With increased payload

Replaces PGD781M

Requires Wear Sensor - Sold Separately

OE Pad Material is Semi-Metallic Includes Pad Installation Hardware

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

with 338mm Front Rotor Requires Wear Sensor - Sold Separately

Without pad wear sensor Pad Wear Sensor Type None Without abutment clips

Includes Wear Sensor

Without pad wear sensor Pad Wear Sensor Type None Without abutment clips

Requires Wear Sensor - Sold Separately

Includes Wear Sensor

Requires Wear Sensor - Sold Separately

with Performance Brakes From 06/2006

Requires Wear Sensor - Sold Separately

With increased payload

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

Without pad wear sensor Pad Wear Sensor Type None Without abutment clips wihtout Usable Load Increase; wihtout Chassis, Officials Utility Vehicle; wihtout Reinforced Brakes

Includes Wear Sensor

Includes Wear Sensor

Includes Wear Sensor

Without increased payload

Production: 05/01/2007-

Without pad wear sensor Pad Wear Sensor Type None Without abutment clips From 05/2007

Requires Wear Sensor - Sold Separately

Production: 05/01/2007-

Requires Wear Sensor - Sold Separately

with Performance Brakes From 06/2006

Production: 05/01/2007-

FMSI Pad No. D763; Solid; 272mm Dia.; 83mm Height; 10mm Thick; 75mm Center Hole Dia.; Pad Dimensions: 123 x 45 x 17mm

with 300mm Front Rotor Requires Wear Sensor - Sold Separately

Requires Wear Sensor - Sold Separately

Includes Wear Sensor

Requires Wear Sensor - Sold Separately

Production: 05/01/2007-

FMSI Pad No. D763; Solid; 272mm Dia.; 83mm Height; 10mm Thick; 75mm Center Hole Dia.; Pad Dimensions: 123 x 45 x 17mm

FMSI Pad No. D763; Solid; 272mm Dia.; 83mm Height; 10mm Thick; 75mm Center Hole Dia.; Pad Dimensions: 123 x 45 x 17mm

With performance brakes

Requires Wear Sensor - Sold Separately

with 338mm Front Rotor Requires Wear Sensor - Sold Separately

Requires Wear Sensor - Sold Separately

FMSI Pad No. D763; Vented/Solid; 272/275/280/294mm Dia.; 60/60.5/75/78/83mm Height; 75mm Center Hole Dia.; Pad Dimensions: 123 x 45 x 17mm

0.630 Thickness

0.630 Thickness

0.630 Thickness

0.630 Thickness

Requires Wear Sensor - Sold Separately

Max Performance Carbon Metallic Brake Pad

0.630 Thickness

0.630 Thickness

0.638 Thickness

0.638 Thickness

FMSI Pad No. D781; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 150 x 57 x 16mm

FMSI Pad No. D558; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 151 x 57 x 16mm

Requires Wear Sensor - Sold Separately

0.638 Thickness

0.638 Thickness

0.630 Thickness

0.630 Thickness

FMSI Pad No. D558; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 151 x 57 x 16mm

FMSI Pad No. D781; Vented/Solid; 5 Bolt Holes; 286/300mm Dia.; 52mm Height; 12/22mm Thick; 79mm Center Hole Dia.

FMSI Pad No. D781; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 150 x 57 x 16mm

FMSI Pad No. D558; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 151 x 57 x 16mm

FMSI Pad No. D781; Vented; 286mm Dia.; 52mm Height; 22mm Thick; 79mm Center Hole Dia.; Pad Dimensions: 150 x 57 x 16mm

0.654 Thickness

0.654 Thickness

0.748 Thickness

0.748 Thickness

0.654 Thickness

0.654 Thickness

0.748 Thickness

0.748 Thickness

0.748 Thickness

0.748 Thickness

0.630 Thickness; Motorsports

0.630 Thickness

0.630 Thickness; Motorsports

0.630 Thickness

0.654 Thickness

0.654 Thickness

0.748 Thickness

0.748 Thickness

with 338mm Front Rotor Requires Wear Sensor - Sold Separately

0.748 Thickness

0.748 Thickness

0.654 Thickness

0.654 Thickness

0.630 Thickness

0.630 Thickness

0.748 Thickness

0.748 Thickness

0.638 Thickness

0.638 Thickness

0.630 Thickness

0.630 Thickness

0.630 Thickness

0.630 Thickness

0.654 Thickness

0.654 Thickness

0.748 Thickness

0.748 Thickness

0.638 Thickness

0.638 Thickness

0.748 Thickness

0.748 Thickness

Front And Rear