BMW X5 Oxygen Sensor Replacement

Grade: Aftermarket Dimensions: Length: 910-1400mm Weight: 0,23kg With OE No. 11787557756

Cyl 1-3

Cyl 4-6

Cyl 4-6

with 950mm Overall Length

Cyl 1-3

After Catalyst in Exhaust Pipe

B2S2 OE Equivalent Design

Cyl 4-6

For Cylinders 5 to 8 Only

Sensor Located in Rear Manifold/Exhaust Pipe

12V - 6-Pin Connector - Cable: 1050mm

B2S2

Cyls. 4-6 B2S1 OE Equivalent Design

Cyls. 1-3 B1S2 OE Equivalent Design

Before Catalyst in Exhaust Pipe

Cyl 1-3

B2S2 OE Equivalent Design

B2S2 OE Equivalent Design

B2S2

B1S2 OE Equivalent Design

12V - Cable: 425mm

For Cylinders 1 to 4 Only

B2S2

325mm Length Gray

For Cylinders 1 to 4 Only

680mm Length Black

Bank 2 Sensor 1 w/ 5 Wires

It fits vehicles with the N20 or N26 engine. Fits BMW F10, F15, F30, F32, and F36 chassis.

Condition: Excellent (A)

This is a set of catalytic oxygen (O2) lambda probe sensors. Fits BMW E85 chassis.

Condition: Excellent (A)

It is an oxygen sensor for vehicles with the M57 diesel engine. Fits BMW E90 and F15 chassis.

Condition: Excellent (A)
Mileage: 156,200 miles

It fits vehicles with the M57 engine. Fits BMW E90 and F15 chassis.

Condition: Excellent (A)

This is a set of four oxygen sensors. Fits BMW E36 chassis.

Condition: Excellent (A)

Fits vehicles with the N20 or N26 engine. Fits BMW F10, F15, F30, F32, and F36 chassis.

Condition: Excellent (A)
Mileage: 172,400 miles

This is a set of oxygen sensors. Fits BMW E70, E71, E92, and E93 chassis.

Condition: Excellent (A)
Mileage: 176,800 miles

Grade: Aftermarket Description: 4 Cables / 300 mm

Grade: Aftermarket Description: 4 Cables / 1020 mm With OE No. MHK000220

It includes both sides. Fits vehicles with the N63 engine only. Fits BMW F01, F02, F10, F12, F15, and F16 chassis.

Condition: Excellent (A)

Fits vehicles with the N55 engine only. Fits BMW F10, F15, F22, F30, F32, and F36 chassis.

Condition: Excellent (A)

It fits vehicles with the N55 engine only. Fits BMW F10, F15, F22, F30, F32, and F36 chassis.

Condition: Excellent (A)
Mileage: 130,700 miles

It fits vehicles with the N55 engine only. Fits BMW F10, F15, F22, F30, F32, and F36 chassis.

Condition: Excellent (A)
Mileage: 72,100 miles

It fits vehicles with the N55 engine. Fits BMW F10, F15, F22, F30, F32, and F36 chassis.

Condition: Excellent (A)
Mileage: 237,200 miles

Cyl 1-3

B1S2

Cyl 4-6

B1S2

This is a set of catalytic oxygen (O2) lambda probe sensors. Fits BMW E70 chassis.

Condition: Excellent (A)

Nr. Of Wires: 4 Exhaust System: After catalytic converter

Wire length: 59,00 inch

After catalyst in exhaust pipe

Before catalyst in exhaust pipe

Cyl 4-6

Cyl 4-6

It fits vehicles with the N47 or N57 engine only. The NOx sensor length is 415mm. Fits BMW F30, E70, and F15 chassis.

Condition: Excellent (A)

B1S1

after Particulate Filter B1S2

O.E. Quality Universal Replacement Sensor

Cyl 4-6

Cyls. 1-3 B1S2 OE Equivalent Design

B1S2

O.E. Quality Direct Fit Replacement Sensor

Grade: Aftermarket With OE No. 11787589122

B1S1

B1S2

Cyls. 4-6 B2S2 OE Equivalent Design

Cyl 1-3

B1S1

Before Catalyst : Regulating Lambda Probe : 320mm

O.E. Quality Direct Fit Replacement Sensor

B1S1

Grade: Aftermarket Weight: 0,14kg Location-Front Manifold With OE No. 11787526262

B1S1

B1S1

Cyl 1-3

Before Catalyst : Regulating Lambda Probe : 320mm

B1S1

After Catalyst : Lambda Monitor Sensor : 990mm

After Catalyst : Lambda Monitor Sensor : 990mm

Fits vehicles with the B58 engine. Fits BMW G01, G05, G20, G22, G23, and G30 chassis.

Condition: Excellent (A)

For vehicles with the B58 engine. Fits BMW G01, G05, G20, G22, G23, and G30 chassis.

Condition: Excellent (A)
Mileage: 56,100 miles

Fits vehicles with the B58 engine. Fits BMW G01, G05, G20, G22, G23, and G30 chassis.

Condition: Excellent (A)

O.E. Quality Direct Fit Replacement Sensor

Replacement

After Catalyst : Lambda Monitor Sensor : 990mm

For Cylinders 4 to 6 Only

B1S1

B1S2 OE Equivalent Design

After Catalyst : Cylinders 1-4 : Lambda Monitor Sensor : 450mm

After Catalyst : Lambda Monitor Sensor : 560mm

After Catalyst : Cylinders 4-6 : Lambda Monitor Sensor : 490mm

B1S2 OE Equivalent Design

Location-Front Manifold 12V - 4-Pin Connector - Cable: 600mm

after Particulate Filter B1S2

After Catalyst - Black : Cylinders 1-4 : Lambda Probe : 325mm

Cyl 1-3

After Catalyst : Cylinders 1-3 : Lambda Monitor Sensor : 560mm

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

For Cylinders 1 to 3 Only

After Catalyst : Lambda Monitor Sensor : 955mm

Fits BMW G05 chassis.

Condition: Excellent (A)

This is a set of catalytic oxygen (O2) lambda probe sensors. For vehicles with the N63B44M3 engine. Fits BMW G05 chassis.

Condition: Excellent (A)

12V - Cable: 990mm

After Catalyst : Cylinders 1-3 : Lambda Monitor Sensor : 560mm

After Catalyst : Lambda Monitor Sensor : 990mm

O.E. Quality Direct Fit Replacement Sensor

After Catalyst - Black : Cylinders 1-4 : Lambda Probe : 325mm

After Catalyst : Cylinders 1-4 : Lambda Monitor Sensor : 450mm

After Catalyst - Grey : Cylinders 5-8 : Lambda Probe : 325mm

After Catalyst : Cylinders 1-3 : Lambda Monitor Sensor : 560mm

For Cylinders 4 to 6 Only

After Catalyst : Cylinders 4-6 : Lambda Monitor Sensor : 490mm

For Cylinders 1 to 3 Only

Sensor Located in Front Manifold/Exhaust Pipe

Before Catalyst - Black : Cylinders 1-4 : Lambda Probe : 680mm

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

Before Catalyst - Black : Cylinders 1-4 : Lambda Probe : 680mm

Bank 1 Sensor 1 w/ 5 Wires

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

After Catalyst : Lambda Monitor Sensor : 740mm

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

Before Catalyst

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

Before Catalyst : Regulating Lambda Probe : 520mm

After Catalyst : Lambda Monitor Sensor : 740mm

Before Catalyst : Cylinders 1-3 : Regulating Lambda Probe : 1540mm

Before Catalyst : Cylinders 4-6 : Regulating Lambda Probe : 1050mm

Before Catalyst : Cylinders 1-3 : Regulating Lambda Probe : 1540mm

Before Catalyst - Grey : Cylinders 5-8 : Lambda Probe : 950mm

Before Catalyst - Grey : Cylinders 5-8 : Lambda Probe : 950mm

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

12V - 6-Pin Connector - Cable: 500mm

Before Catalyst : Cylinders 1-4 : Regulating Lambda Probe : 480mm

Before Catalyst - Black : Cylinders 1-4 : Lambda Probe : 680mm

B1S2 OE Equivalent Design

Before Catalyst : Cylinders 5-8 : Regulating Lambda Probe : 840mm

Before Catalyst