Engine Designation: M54, FI, Naturally Aspirated, GAS, For Cylinders 4-6 or For Cylinders 1-3
Engine Designation: N54B30A, FI, Turbocharged, GAS, For Cylinders 1-3
Cyl 1-3 Or 4-6
Engine Designation: N52, FI, Naturally Aspirated, GAS, For Cylinders 4-6
Grade: Aftermarket Description: 4 Cables / 300 mm
Grade: Aftermarket Description: 4 Cables / 1020 mm With OE No. MHK000220
Cyl. 1 To 3
After Catalyst in Exhaust Pipe
Cyl 4-6 B2S2
Cyl 4-6
Cyl 1-3
B1S2
After catalyst in exhaust pipe
Cyl 1-3
For Cylinders 4 to 6 Only
O.E. Quality Direct Fit Replacement Sensor
For Cylinders 4 to 6 Only
Engine Designation: N54B30A, FI, Turbocharged, GAS, For Cylinders 1-3
For Cylinders 4 to 6 Only
For Cylinders 1 to 3 Only
Cyls. 4-6 B2S1 OE Equivalent Design
Grade: Aftermarket Dimensions: Length: 910-1400mm Weight: 0,23kg Cylinder 1,2,3,4,5,6 With OE No. 11787557756
Before Catalyst in Exhaust Manifold
Before Catalyst in Exhaust Pipe
Cyl 4-6
Engine Designation: N52, FI, Naturally Aspirated, GAS, For Cylinders 4-6
Cyls. 1-3 B1S2 OE Equivalent Design
Cyl 1-3
O.E. Quality Universal Replacement Sensor
Cyl. 4 To 6
Cyl 4-6
Cyl 4-6
For Cylinders 1 to 3 Only
Cyls. 1-3 B1S2 OE Equivalent Design
Grade: Aftermarket With OE No. 11787589122
Cylinders 1 through 6
Cyls. 4-6 B2S2 OE Equivalent Design
Cyl 4-6
Cyl 4-6
Cyl 4-6 B2S2
Cyls. 1-3 B1S2 OE Equivalent Design
B1S2
Grade: Aftermarket Weight: 0,14kg Location-Front Manifold With OE No. 11787526262
Bank 2 Sensor 1 Cylinders 4-6 w/ 5 Wires
Cyl 4-6
Wire length: 59,00 inch
O.E. Quality Direct Fit Replacement Sensor
Cylinders 1 through 6
Wire length: 37,00 inch
B1S1
For Cylinders 1 to 3 Only
For Cylinders 1 to 3 Only
Location-Rear Manifold 12V - Cable: 500mm
For Cylinders 4 to 6 Only
B1S2 OE Equivalent Design
Cyl 1-3 B1S1
For Cylinders 1 to 3 Only
Cyls. 4-6 B2S2 OE Equivalent Design
B1S1
Grade: Aftermarket Description: 4 Cables Dimensions: 1000 mm For Cyl. 4,5,6
For Cylinders 1 to 3 Only
B1S2
Cyl 4-6
Cyl 4-6 B2S1
Cylinders 4 through 6
Cyl 1-3 B1S1
Cyl 4-6 B2S1
Location-Front Manifold 12V - 4-Pin Connector - Cable: 600mm
Cylinder 4,5,6 For Cyl.4,5,6 12V - Cable: 990mm
For Cylinders 4 to 6 Only
Sensor Located in Front Manifold/Exhaust Pipe
Bank 1 Sensor 1 w/ 5 Wires
Cylinders 1 through 6
Cylinder 4,5,6 For Cyl.4,5,6 Length-910mm 12V - 6-Pin Connector - Cable: 1050mm
with OE No. 11787558087 12V - 6-Pin Connector - Cable: 1200mm
Your Go-To Place for Auto Parts!
Shop with confidence and peace of mind
Over 18 years of excellence
Meets or exceeds OE standards
Browse our selection of quality oxygen sensor parts designed specifically for your BMW Z4. We carry options across multiple trim levels, body styles, and engine configurations to ensure a perfect fit for your vehicle.
2.5i • 2.5si • 3.0i • 3.0si • Coupe 3.0si • Design Pure Traction • M Coupe • M Roadster • M Sport • M40i • M40i First Edition • Roadster 3.0i • Roadster 3.0si • sDrive M40i • sDrive18i • sDrive18iA • sDrive20i • sDrive20i M Sport • sDrive20i Sport Line • sDrive23i • sDrive28i • sDrive30i • sDrive35i • sDrive35i Pure Traction • sDrive35is
Convertible • Coupe
L4 2.0L • L6 2.5L • L6 3.0L • L6 3.2L
Automatic • Automatic Dual Clutch • Manual
After Catalytic Converter • After Catalytic Converter, Driver or Passenger Sid • After Catalytic Converter, Driver Side • After Catalytic Converter, Front • After Catalytic Converter, Passenger Side • After Catalytic Converter, Rear • Before Catalytic Converter • Before Catalytic Converter, Driver or Passenger Si • Before Catalytic Converter, Driver Side • Before Catalytic Converter, Front • Before Catalytic Converter, Passenger Side • Before Catalytic Converter, Rear • Center • Downstream • Downstream Front • Downstream Left • Downstream or Upstream • Downstream Rear • Downstream Right • Downstream, Front • Front • Front Left • Front Right • Left • Rear • Rear Left • Rear Right • Rear Upper • Right • Right Upper • Upstream • Upstream Front • Upstream Left • Upstream Rear • Upstream Right
