Buick Century Electric Fuel Pump Replacement

An engine oil pressure switch may be required A fuel pump block-off plate may be required

Includes Tank Seal Strainer required to validate the warranty: F102S

w/Digital Dash Includes Tank Seal Strainer required to validate the warranty: F104S

12 volt 2.5 to 4.5 pounds of pressure Requires 3" x 5" Mounting Area

Includes Tank Seal Strainer required to validate the warranty: F104S

Platinum Pro Part New Strainer Required For Warranty

Includes Tank Seal Strainer required to validate the warranty: F102S

w/ID Tag ARA on Harness Includes Tank Seal Strainer required to validate the warranty: F104S

An engine oil pressure switch may be required A fuel pump block-off plate may be required

Harness Stamped ARA

1.45" diameter pump

Strainer required to validate the warranty: F141S

Strainer required to validate the warranty: F139S

Universal 12 Volt 5 to 9 pounds of pressure. Requires 3" x 5" Mounting Area

w/ CAE or CEH on Wiring Harness Tag

2 inch pump diameter

In-Tank Pump Failure To Install A New Fuel Strainer (Where Applicable) Will Void Warranty

with digital dash; Platinum Pro Part New Strainer Required For Warranty

1 locking tab on internal pump connector. 38mm body with brass return jet on pump body and black jet hose.

2 locking tabs on internal pump connector. 4 doormodel. 52mm large diameter body.

DOUBLE INLET

Includes Tank Seal

(Universal Inline) (12 Volt 4 to 6 PSI) Requires 3" x 6" Mounting Area

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34

An engine oil pressure switch may be required A fuel pump block-off plate may be required

w/ ARA Stamped on Fuel Pump Harness

An engine oil pressure switch may be required A fuel pump block-off plate may be required

Universal 12 Volt 5 to 9 pounds of pressure.

Professional; A/C