Buick LaCrosse Wheel Bearing and Hub Assembly Replacement

Standard Hub Unit

without Hardware Plastic Sensor Wire Clip

Wheel Hub Assembly Axle Nut Torque Spec: 173 ft-lbs / 235Nm

Standard Hub Unit

Plastic Sensor Wire Clip

Plastic Sensor Wire Clip; with Hardware and Upgraded Design

with 16in Wheels with 30 Splines

with Hardware

Heavy Duty Hub Unit

FAG Global Number 102261

Heavy Duty Hub Unit

Wheel Hub Assembly Axle Nut Torque Spec: N/R

4.5280 in. Bolt Circle Diameter

Standard Hub Unit

without Hardware

5 X 120.7 mm bolt pattern Wheel Hub Assembly Axle Nut Torque Spec: Tighten to 111 ft-lbs / 145Nm, then loosen 45 degrees and finally re-tighten to 185 ft-lbs / 250Nm.

with ABS Ring 2.472 in. Bolt Circle Diameter

Heavy Duty Hub Unit

with Hardware and Upgraded Design

Plastic Wire Clip

Heavy Duty Hub Unit

with ABS Ring 4.527 in. Bolt Circle Diameter ; X-Tracker

FAG Global Number 101626

Stud Length from Face of Flange to End of Stud 39 mm

Enhanced Hub Assembly - Includes Grime Defense Outboard Seal, Primary Inboard and Outboard Seals, as well as molded grommet for ABS cable Not Coated

Performance Suspension

FAG Global Number 713 1624 100

Not Coated

without ABS Ring 4.528 in. Bolt Circle Diameter without ABS Sensor

Wheel Hub Assembly Axle Nut Torque Spec: N/R

without ABS Ring 4.528 in. Bolt Circle Diameter without ABS Sensor

without ABS Ring 4.4915 in. Bolt Circle Diameter without ABS Sensor ; X-Tracker

FAG Global Number 102026 ABS Cable Included

FAG Global Number 805984.09

with ABS Ring 4.7244 in. Bolt Circle Diameter with 1.3285 in. Bearing Inside Diameter without ABS Sensor ; X-Tracker

FAG Global Number 713 1430 100