Buick LeSabre Engine Camshaft and Lifter Kit Replacement

Off-Idle to 5500rpm Adv. Dur. at 0.500 Int./Exh 204/214Deg. Lift at Valve Int/Exh. 0.420./0.442in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 14 inch~ 50 State Legal~ Produces 320 hp/382 ft.-lbs. When Matched w/2701 Intake and 60909 Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 Int/Exh 204/214 Deg. Lift at Valve Int/Exh 0.449/0.473 in. Lobe Spes 114 Deg. Intake Center Line 106 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle May Require Longer Than Stock Pushrods~ Idle Vacuum at 1000 RPM - 16 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ Produces 330 ft.-lbs. When Matched w/3711 Intake and Stock Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 Int/Ext. 204/214 Deg. Lift at Valve Int/Exh 0.420/0.442 in. Lobe Seps 105 Deg. Intake Center Line 105 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Idle Vacuum at 1000 RPM - 15 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 387hp and 439 ft.-lbs When Matched w/2156 Intake and 60559 Heads

Hyd 1500-6500rpm Adv Dur. at 0.050 Int.Exh/ 234/244 Deg. Lift at Valve Int/Exh. 0.488/0.510 in. Lob Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 In/Exh 204/214 Deg. Lift at Valve Int/Exh 01.448/0.472 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. For Non Computer-Controlled Vehicles~ Idle Vacuum at 1000 RPM - 15 inch~ Even Fire~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

Hyd. 1500-6500rpm Adv. Dur. at 0.050 Int/Exh 231/240 Deg. Lift at Valve Int/Exh 0.470 in. Lobe Seps 113.5 Deg. Intake Center Line 112 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 10 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 422hp and 441 ft.-lbs. when Matched w/7156 Intake and 60599 Heads

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Use With VS-310 Valve Spring. Installed Height 1.57 Inches Not California Compliant Not Computer Compatible

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Use With VS-310 Valve Spring. Installed Height 1.57 Inches Not California Compliant Not Computer Compatible

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Use With VS-720 Valve Spring. Installed Height 1.67 Inches Not California Compliant

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Use With VS-720 Valve Spring. Installed Height 1.67 Inches Not California Compliant

Hyd. 1500-6500rpm Adv. Dur. at 0.050 Int/Exh 224/234 Deg. Lift at Valve Int/Exh 0.496/0.520 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads