Buick Park Avenue Fuel Pump Module Assembly Replacement

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

w/Module Code CRP Includes Fuel Pump, Sending Unit, Float, Fuel Reservoir, Fuel Strainer, Upgraded Wiring Harness and Tank Seal

Wiring Harness Included Float Arm Included & Shipped Detached; Reattachment Required; Instructions Included Internal Strainer Included Failure To Replace The Fuel Tank Lock Ring And Seal Will Void Warranty Fuel Tank Must Be Inspected And Clean Prior To Installation

Updated design with Check Valve. Can be used to replace fuel pump modules built with or without check valve with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector

1ST DESIGN BEFORE VIN YU145189

Updated design with Check Valve. Can be used to replace fuel pump modules built with or without check valve with Original OE design had a 2x2 connector, OE design upgraded to a 1x4 Connector with A 1x4 splice kit included for vehicles with 2x2 Connector

Original design without Check Valve. Must only be used to replace fuel pump modules built without check valve. If you are unsure if your module has a check valve, then use FG0347 Two port cover utilized for manufacturing purposes only. Use the open port, do not tamper with the plugged port