Chevrolet Avalanche Suspension Leveling Kit Replacement

2 in.; Smooth Black Does Not Fit Magna Ride Suspension

Without Magna Ride Suspension

2 in. Lift; Will Fit Aluminum Or Steel Front Suspension; Not Intended For Autoride Models; Supersedes PN[C1420LMS] Does Not Fit Models w/Adaptive Ride Control~Does Not fit Models w/Autoride Or Magnetic Ride Control

Factory wheel/tire combo; Factory 20s with 1/4" wheel spacer with tire size provided in tire sizing chart for 20" wheels. Fitment: Fender Trim Plate Accessories will NOT fit 2007- 2013 model years. Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.

2 in. Lift; For Use w/PN[12000KH/12000KN]; Vehicles w/Front Coilovers Only Incl. Front Strut Spacers/Hardware Bag~No Strut Disassembly Required~Only Fits Models w/Front Coil Over

Without Magna Ride Suspension

2 in.

Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

Rear Max. Lift 1.5 in.

Will Not Fit With Factory Auto-Leveling Option

2 in. Lift; Installs Above Strut Assembly; Install Time 2 Hours Does Not Fit Models w/Adaptive Ride Control~Does Not fit Models w/Autoride Or Magnetic Ride Control

; 2 in. Lift; Incl. Spacers/Hardware 2 in. Lift Use 33/12.5OR17 Tire w/17x18 Wheels w/5 in. BS w/Minor Trim.~ Some Models May Not Be Level After Install

3"/1.5" LEVELING KIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT MODELS WITH AUTORIDE OR MAGNERIDE MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Lift; Vehicles w/Front Coilovers Only; SX8000 Shocks Hardware Bag~Incl. SX8000 Shocks/Shock Boots/Front Strut Spacers