Chevrolet C10 Engine Camshaft and Lifter Kit Replacement

Off-Idle to 5500rpm Adv. Dur. at 0.500 Int./Exh 204/214Deg. Lift at Valve Int/Exh. 0.420./0.442in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 14 inch~ 50 State Legal~ Produces 320 hp/382 ft.-lbs. When Matched w/2701 Intake and 60909 Heads

Off-Idle to 5500rpm Adv. Dur. at 0.050 Int/Exh 218/228 Deg. Lift at Valve Int/Exh 0.500 in. Lobe Seps 114 Deg. Intake Center Line 109 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 15 inch~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 470 ft.-lbs When Matched w/2161 Intake And Stock Heads

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

OE Stock Replacement Grind

Hyd 1500-6500rpm Adv Dur. at 0.050 Int.Exh/ 234/244 Deg. Lift at Valve Int/Exh. 0.488/0.510 in. Lob Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Use Stock Ratio Rocker Arms Only~ Idle Vacuum at 1000 RPM - 11 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Produces 410hp and 409 ft.-lbs. When Matched w/7501 Intake and 60899 Heads

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 278 Advertised Exhaust Duration 288 Use With VS-380 Valve Spring. Installed Height 1.72 Inches Not California Compliant

OE Stock Replacement Grind

Hyd. 1500-6500rpm Adv. Dur. at 0.050 Int/Exh 240/240 Deg. Lift at Valve Int/Exh .0560/0.573 in. Lobe Seps 112 Deg. Intake Center Line 110 Deg. Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle Not For 65-66 Chevy Big Block Requiring A Grooved Rear Cam Journal~ Idle Vacuum at 1000 RPM - 10 inch~ For Pre-Pollution Controlled Vehicles Or Engine Swaps~ Produces 540hp and 530 ft.-lbs. When Matched w/7163 Intake and 60559 Heads

OE Stock Replacement Grind

OE Stock Replacement Grind

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 288 Advertised Exhaust Duration 298 Use With VS-320 With Installed Height of 1.90 Inches Not California Compliant Check For Valve Spring Coil Bind

Class 1, Excellent Low End Torque And Horsepower Good Idle And Daily Usage Advertised Intake Duration 288 Advertised Exhaust Duration 298 Use With VS-320 With Installed Height of 1.90 Inches Not California Compliant Check For Valve Spring Coil Bind

Off Idle to 5500rpm Adv. Dur. at 0.50 Int/Exh 214/214 Deg. Lift at Valve Int/Exh 0.442 in. Lobe Spec 112 Deg. Intake Center Line 107 Deg. CARB E.O. D-215-19 Idle Vacuum at 1000 RPM - 15 inch~ 50 State Legal~ Produces 395 ft.-lbs. When Matched w/2101 Intake and Stock Heads

Hyd. 2500-6500rpm Duration at 0.050 Int./Exh. Lift at Valve Int./Exh. 0.527/0.533 in. Not For 1965-66 BB Chevy Requiring Grooved Rear Cam Journal Legal For Use On Pre-Pollution Controlled Vehicles Incl. Hyd. Flat Tappet Lifters~ Lobe Spes. 114 Degree~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ For Pre-Pollution Controlled Vehicles Or Engine Swaps

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.

Fits only factory flat tappet Chevrolet 4.3L V6 engines.