Chevrolet C10 Suburban Differential Replacement

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

30 Spline; 1.30 in. Axle Shaft Diameter; 2.76 - 3.42 Ring Gear Pinion Ratio; Rear 8.875 in.

28 Spline; 1.20 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; 8.5 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

30 Spline; 1.30 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Also Fits GM Half Ton Truck

30 Spline; 1.30 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear 8.875 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

28 Spline; 1.20 in. Axle Shaft Diameter; 2.73 And Up Rng Gear Pin Rat; Manual Locking Hubs Are Recomded For Some Application; 8.5 in. For Axles w/Small bearing Bores Race O.D. 2.89 in. LM102949/LM102911 Req.~Axles w/Large Bearing Bores Race O.D. 3.06 in. LM603049/LM603012 Req.

Fits 3.73 Gear Ratio And Up; 4320 Chromoly Spider Gears

Fits 2.76-3.42 Gear Ratio; 4320 Chromoly Spider Gears

28 Spline; 2.73 And Up GM 8.5 in.; 28 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 in. Rear; 28 Spline; 2.73 And Up; 1.781 in. Bearing Journal

8.6 in. 10 Bolt; 30 Spline; 2.73 And Up GM 8.5 in.; 30 Spline; 2.73 And Up~Yukon Dura Grip Positraction / Limited Slip; GM 8.5 in. Rear; 30 Spline; 2.73 And Up; 1.781 in. Bearing Journal

Dana 60; 30 Spline; 4.56 And Up~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.56 and Up Ratio

Dana 60; 30 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60; 30 spline; Full Float Axle; 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.10 And Down Dana 60; 30 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 4.56 And Up Dana 60; 30 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 30 Spline; 4.56 And Up; w/ Full Float Axle

2.73 Gear Ratio And Up GM 8.5 in.; 2.73 Gear Ratio And Up~GM 8.5 in.; Yukon Grizzly Locker; 2.73 Gear Ratio And Up; 1.78 in. Bearing Journals; Uses LM102949/ LM102911 Carrier Bearings

30 Spline; 1.30 in. Axle Shaft Diameter; 3.73 And Up Ring Gear Pinion Ratio; Rear 8.875 in.

28 Spline; 1.20 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; 8.5 in.

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Axle: GM semi float 14B 9.5" Shaft: 1.37" Spline: 33 Ratio: 3.23 and up Confirm axle is 9.25" not 8.5"/8.6" GM 10 bolt

30 Spline; 4.56 Ratio And Up Dana 60; 30 Spline; 4.56 Ratio And Up

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

30 Spline; 4.10 Ratio And Down Dana 60; 30 Spline; 4.10 Ratio And Down

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

Selectable Full Locker w/Limited Slip; For Use w/2.76-3.42 Ratio; 3 Series Case; 30 Spline 8.875 in. (12 Bolt)

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Selectable Full Locker w/Limited Slip; For Use w/2.73-Up Ratio; 28 Spline 8.5 in. (10 Bolt)

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Selectable Full Locker w/Limited Slip; For Use w/3.73-Up Ratio; 4 Series Case; 30 Spline 8.875 in. (12 Bolt)

Currie Performance 31 Spline Axles; 5 Lug

Currie Performance 31 Spline Axles; 5 Lug Late Model Year

Currie Performance 31 Spline Axles; 5 Lug