Chevrolet C1500 Wheel Bearing Replacement

Heavy Duty Brakes

Except Heavy Duty Chassis

with Light Duty Brakes Taper Bearing Set Includes Cup and Cone

0.7200 in. Cone Length 0.5500 in. Cup Length with 1.375 in. Bearing Inside Diameter with 2.563 in. Outside Diameter Bearing(s) 0.710 in. Width

with 0.8437 in. Bearing Inside Diameter with 1.9687 in. Outside Diameter Bearing(s) 1.9687 in. Width 0.7200 in. Cone Length 0.5500 in. Cup Length

with Heavy Duty Brakes

Heavy Duty

Except Heavy Duty Chassis

with 8.5in Ring Gear

Replacement Bearing 8.5" Ring Gear

Except Heavy Duty Chassis

0.7800 in. Cone Length 0.5800 in. Cup Length with 1.625 in. Bearing Inside Diameter with 2.891 in. Outside Diameter Bearing(s) 0.770 in. Width

with Heavy Duty Brakes

with 2.250 in. Bearing Inside Diameter with 3.813 in. Outside Diameter Bearing(s) 0.864 in. Width ; w/10.50" w/o Dana H.D.

with Heavy Duty Brakes Taper Bearing Set Includes Cup and Cone

Replacement Bearing 9.5" Ring Gear

Except Heavy Duty Chassis

with 2.0000 in. Bearing Inside Diameter with 3.2500 in. Outside Diameter Bearing(s) 3.2500 in. Width 0.8750 in. Cone Length 0.6500 in. Cup Length ; w/10.50" w/o Dana H.D.

Axle Repair Bearing 8.5" Ring Gear

w/ 8.5" Ring Gear Wheel Bearing Axle Nut Torque Spec: N/R

8 1/2 inch Rear End

with Heavy Duty Brakes

Heavy Duty Chassis

9.50" Ring Gear FAG Global Number FC68302

with 1.6253 in. Bearing Inside Diameter with 2.8040 in. Outside Diameter Bearing(s) 2.8040 in. Width with 8.50 & 8.625 Ring Gear

Ring Gear 8.50"

9.50" Ring Gear

Standard Design with 8.5 (in) Ring Gear

8.50",8.625" Ring Gear FAG Global Number F563826 1.024" Wide Brg. 1.024" Width

8.5 in. Ring Gear

Standard Design with 9.5 (in) Ring Gear

with 8.5 (in) Ring Gear with Axle Repair Bearing Assembly Not for tapered axle tube ID Models

with 9.5 (in) Ring Gear with Axle Repair Bearing Assembly

9.50" Ring Gear

9.50" Ring Gear

9.5" Ring Gear

Differential Bearing; 9.50 RING GEAR SAGINAW-AMERICAN AXLE; INCLUDES CUP AND CONE) (TIMKEN, JLM506849-JLM506811, 55MM ID X 90MM OD X 25MM Thick

9.50" Ring Gear