Chevrolet C1500 Suburban Suspension Shock Absorber Replacement

0 - 1 in. lift

Large Bore with 51.2 (mm) Body

FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Recommended OE Application -Specific Replacement

For PN[K2087/K2081/K2090/K2101/K1045/K6000/K1051/K3044/K3025/K3006/K2104/K2134/K2063/K20631/K20611/K2061/K2060/K6008]; w/3 - 7.5 in. Lift

For PN[K1037/K1035/K2166/K1036/K7017/K7014]; 14.30 in. Extended Length; 9.52 in. Collapsed Length; 4.78 in. Stroke; w/4 in. Lift

REAR SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN INCLUDES QUANTITY 1, 1.5" WIDE SLEEVE FOR UP TO A 9/16+"/14MM BOLT 24.5" EXTENDED, 14.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Recommended OE Application -Specific Replacement

Recommended OEM Replacement

Recommended OEM Replacement

Monotube Performance Upgrade

Monotube Performance Upgrade

Slight Grinding of Lower Control Arm is Required with Front Raised Height 0 (in) to 1.0 (in)

with Rancho Suspension System with Front Raised Height 4 (in) Slight Grinding of Lower Control Arm is Required

with Rear Raised Height 4.0 (in)

Fits Vehicles With 1" Rear Lift

Lowering Rate: F: 0.0-2.0"

Lowering Rate: R: 0.0-1.0"

Lowering Rate: R: 5.0-7.0"

Lowering Rate: F: 2.0-5.0"

Lowering Rate: R: 2.0-4.0"

Lowering Rate: R: 0.0"

Lowering Rate: F: 0.0"

with Rear Raised Height 4.0 (in)

Slight Grinding of Lower Control Arm is Required with Front Raised Height 0 (in) to 1.0 (in)

with Rancho Suspension System with Front Raised Height 4 (in) Slight Grinding of Lower Control Arm is Required

For PN[K1119M/K116M/K2168M/K1035M/K2000M/K2164M/K2170M/K3053M/K3054M/K3055M/K1027M/K1036M/K1037M/K6000M]; w/4 in. Lift

Maximum Monotube Performance Upgrade

Maximum Monotube Performance Upgrade

Lowering Rate: F: 2.0-5.0"

SN8: Fits Vehicles with 2"-4" Rear Lowering

SN6: Fits Vehicles with 5"-7" Rear Lowering Lowering Rate: R: 5.0-7.0"

Lowering Rate: F: 0.0-2.0"

SN55: Fits Vehicles with +1" to -1" Rear Lowering

Fits Vehicles With 3" Front a-arm style lift Fits Vehicles with 6" a-arm and spindle style lift

with Rancho Suspension System with Front Raised Height 4 (in) Slight Grinding of Lower Control Arm is Required

Ridetech HQ Series Shock Single Adjustable 4.75in Stroke T-Bar/Stud Mounting 8.55in x 13.3in

Ridetech HQ Series Shock Single Adjustable 5.25in Stroke Wide T-bar/Stud Mounting 9.05in x 14.3in