Chevrolet Camaro Clutch Flywheel Replacement

It fits vehicles with a 5.7L engine and automatic transmission. It features a 12-3/4 inch diameter, neutral balance, 153 teeth, and is designed for a two-piece crank seal on internally balanced engines. The converter has an inner bolt pattern of 9-3/4 inches in diameter and an outer bolt pattern of 10-3/4 inches in diameter.

Condition: Excellent (A)
Mileage: 99,600 miles

It fits vehicles with a 6.2L engine and an automatic transmission. It features a 3-bolt torque converter design.

Condition: Excellent (A)

This is a flywheel drive flex plate.

Condition: Excellent (A)
Mileage: 1,000 miles

It fits vehicles with a 3.6L engine and automatic transmission.

Condition: Excellent (A)
Mileage: 150,300 miles

Solid Disc Flywheel Standard

It fits vehicles with a 5.3L engine and automatic transmission.

Condition: Good (B)
Mileage: 128,300 miles

Light Weight Nodular Flywheel with 1-PC Crank Seal, Engine Code #F; 10-3/8" Disc; 26 Spline

168 Teeth

with 10.4" Clutch; Lightweight Aftermarket Design

Solid Disc Flywheel Standard; 8th Digit of VIN # F

Light Weight Nodular Flywheel with 1-Piece Crank Seal, Engine Code #E; 10-3/8" Disc; 26 Spline

Solid Disc Flywheel Standard

153 Teeth

Solid Disc Flywheel Standard

10-1/2" Disc; 10 Spline

With 11" Clutch; OEM Replacement

It fits vehicles with a 6.0L engine and automatic transmission.

Condition: Good (B)
Mileage: 141,500 miles

For GM V8 Conversion

Teeth: 168 Outer Diameter: 14.13"

Teeth: 168 Outer Diameter: 14.13"

153 Teeth; Weight 16 lbs.; 2 Bolt Pattern; 12.835 in. O. D.; 2.485 in. Flywheel Flange; 0.960 in. Flywheel Height; Nodular Iron

153 Teeth; Weight 17 lbs.; 2 Bolt Pattern; 12.835 in. O. D.; 2.068 in. Flywheel Flange; 0.960 in. Flywheel Height; Nodular Iron

Incl.Ring Gear

168 Teeth; Weight 25 lbs.; 14 Bolt Pattern; 14.096 in. O. D.; 2.068 in. Flywheel Flange; 0.815 in. Flywheel Height; Nodular Iron

Teeth: 153 Outer Diameter: 12.88"

Teeth: 153 Outer Diameter: 12.88"

10.5", 1 1/8-10 Spline; 283,302,327 C.I.

153 Teeth; 10.5 B/B And Diaphragm

Billet Steel; SFI-Spec 1.1; Internal Balance; 25 lbs.; 168T [See Notes 1; 2; 3; 5]

Billet Steel; SFI-Spec 1.1; Zero Balance; 29 Lbs.; 153 Teeth; Incl. 1970-Up GM 572 Crate Motor And Internal Balance Chev. 454

10.5", 1 1/8-10 Spline; 283,302,327 C.I.

OEM 11.75; 11 in. Diaphragm

11", 1 1/8-26 Spline; 12" OPTION

11", 1 1/8-26 Spline; 350,396 C.I., W/11" CLUTCH MUNCIE

168 Teeth; Zero Balance

11", 1 1/8-26 Spline; 350,396 C.I., W/11" CLUTCH MUNCIE

10", 1 1/8-26 Spline; ZL-1, Z-28 oem is dual disc

SFI; Billet Steel; 168T; 36 lbs.; Neutral Balance; 11 in. Long With 3/8 in. Clutch Cover Bolts; Also Fits GM 572 Crate Motor

10.5", 1 1/8-26 Spline; ALL

External. Balance; 168 Teeth; 10.5/11 B&B And Diaphragm; 11 Long Style

142 Teeth; w/o Weight

10.5", 1 1/8-26 Spline; ALL

11", 1 1/8-26 Spline; 12" OPTION

2pc rear main seal,153 tooth 10.5" clutch. Neutral balance for internally balanced engines only.

SFI 6061 T-6 Billet Aluminum 153T Neutral Balance w/2 pc. Rear Seal For 10/10.5/10.95 in. OE Style Clutch Applications

0 Balance; 153 Teeth

10.5", 1 1/8-10 Spline; 283,302,327 C.I.

11", 1 1/8-26 Spline; ALL

2pc rear main seal, 168 tooth, 10.5" and 11" clutch. Neutral balance for internally balanced engines only.

OEM 11.75; 11 in. Diaphragm

11", 1 1/8-26 Spline; 12" OPTION

10", 1 1/8-26 Spline; ZL-1, Z-28 oem is dual disc

168 Teeth; Weight 23.5 lbs.; 14 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance

168 Teeth; Weight 31.2 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance

168 Teeth; Weight 17.85 lbs.; 14 Bolt Pattern; 14.096 in. Outside Diameter; Dowel Pin 5; w/o Counter Balance

11", 1 1/8-26 Spline; 350,396 C.I., W/11" CLUTCH MUNCIE

0 Balance; 168 Teeth

153 Teeth; Weight 30.2 lbs.; 2 Bolt Pattern; 12.835 in. Outside Diameter; w/o Counter Balance

10.5", 1 1/8-26 Spline; ALL

External Balance; 168 Teeth; 10.5/11 B&B And Diaphragm; 11 Long Style

2pc rear main seal,153 tooth 10.5" clutch. Neutral balance for internally balanced engines only.

153 Tooth Ring Gear For 383 or 400 C.I.D. engine must use part #624001 balance plate For 454 C.I.D. engine must use part #624541 balance plate For 502 C.I.D. engine must use part #625021 balance plate

153 Teeth; Weight 17.05 lbs.; 2 Bolt Pattern; 12.835 in. Outside Diameter; w/o Counter Balance

168 Teeth; Weight 20.85 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance

11", 1 1/8-26 Spline

Replacement Of Dual Mass Flywheel May Cause Added Gear Noise~ External Balance Weights Are Included In The Hardware Kit

153 Teeth; Weight 29 lbs.; 24 Bolt Pattern; 12.835 in. Outside Diameter; 24.4 in./oz Counter Balance

11", 1 1/8-26 Spline; Exc. ZL1

2pc rear main seal, 168 tooth, 10.5" and 11" clutch. Neutral balance for internally balanced engines only.

Steel; Neutral Internal Balance; w/Large Bellhousing; 168 Gear Teeth; 40 lbs. Flywheel Thicker Than Stock May Require Bellhousing Spacer

153 Teeth; Weight 29 lbs.; 24 Bolt Pattern; 12.835 in. Outside Diameter; 23.4 in./oz Counter Balance

153 Teeth; Weight 31 lbs.; 2 Bolt Pattern; 12.835 in. Outside Diameter; 23.4 in./oz Counter Balance

153 Teeth; Weight 27.5 lbs.; 24 Bolt Pattern; 12.835 in. Outside Diameter; 33 in./oz Counter Balance

11", 1 1/8-26 Spline

OEM Pull Type

168 Teeth; Weight 15.6 lbs.; 2/3 Bolt Pattern; 14.096 in. Outside Diameter; w/o Counter Balance

Steel; Neutral Internal Balance; 168 Tooth; 30 lbs.; Fits w/Large Bellhousing

8 Bolt; One Piece Billet Chromoly Steel; 18.0 lb

Steel; Neutral Internal Balance; 168 Gear Teeth; 30 lbs.

168 Teeth; 14 Bolt Pattern; 14.105 in. Outside Diameter; 6 Bolt Crankshaft; 0 oz. Counter Balance

153 Tooth Ring Gear For 383 or 400 C.I.D. engine must use part #624001 balance plate For 454 C.I.D. engine must use part #624541 balance plate For 502 C.I.D. engine must use part #625021 balance plate To mount Corvette ZF 6 speed 2 pc rear main seal engine

153 Teeth; Weight 29.3 lbs.; 24 Bolt Pattern; 12.835 in. Outside Diameter; w/o Counter Balance

168 Teeth; 2/3 Bolt Pattern; 14.105 in. Outside Diameter; 6 Bolt Crankshaft; 0 oz. Counter Balance

Replacement Of Dual Mass Flywheel May Cause Added Gear Noise~ External Balance Weights Are Included In The Hardware Kit

153 Teeth; Weight 16 lbs.; 2 Bolt Pattern; w/o Counter Balance

Incl.Clutch Flywheel Ring Gear

Steel; Neutral Internal Balance; 153 Tooth; 30 lbs.; Fits w/Small Bellhousing

153 Tooth Ring Gear For 383 or 400 C.I.D. engine must use part #624001 balance plate For 454 C.I.D. engine must use part #624541 balance plate For 502 C.I.D. engine must use part #625021 balance plate

Billet Aluminum; Internal Balance; 168 Tooth; 14 lbs.; w/Steel Friction Plate

Steel; Detroit External Balance; 153 Tooth; 30 lbs.; Bolts Included; Fits w/Small Journal Ring Gear Only

Steel; Detroit External Balance; 168 Tooth; 30 lbs.; w/Small Journal

Incl.Clutch Flywheel Ring Gear

For Use w/PN[GT04XD]