Chevrolet Camaro Differential Bearing Kit Replacement

For GM 7.5"/7.625"

For Ford 8.8", GM 8.875"; Includes Timken Bearings, Bearing Races

For GM 8.5"/8.625" (10 Bolt); 2.89" Carrier Cup OD, 1.625" Carrier Cone; Includes Timken Bearings, Bearing Races

For GM 8.2" (10 Bolt); Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.5" (10 Bolt); Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.5" (10 Bolt); Auburn Posi, Eaton, or Grip; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Standard Design; 8.5 In. Ring Gear

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.5" (10 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.875" (12 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5" (10 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.2" (10 Bolt); Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.2" (10 Bolt); Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5" (10 Bolt); Auburn Posi, Eaton, or Grip; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.75" IRS; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.5" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.2" (10 Bolt); 1.7812" ID Bearings; Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Super Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5" (10 Bolt); 2.25" OD Axle Bearing; Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Standard Design; 7.5 In. Ring Gear

For GM 8.2" (10 Bolt); Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5" (10 Bolt); Auburn Posi, Eaton, or Grip; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 7.5 In. Ring Gear

For GM 7.6" IRS; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.75" IRS; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5" (10 Bolt); Auburn Posi, Eaton, or Grip; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.5" (10 Bolt); 2.25" OD Axle Bearing; Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.625" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.6" IRS; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Standard Design; 1.7812 In. I.D. Differential Bearings 8.2 In. Axle

Standard Design; 7.5 In. Ring Gear

For GM 8.2" (10 Bolt); 1.7812" ID Bearings; Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Super Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.6" IRS; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.2" (10 Bolt); 1.7812" ID Bearings; Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 1.7812 In. I.D. Differential Bearings 8.2 In. Axle

For GM 8.5" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.6" IRS; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For Dana 44; 3/8" Ring Gear Bolts; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Pinion Washer, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 8.5 In. Ring Gear

For GM 8.5" (10 Bolt); 2.25" OD Axle Bearing; Mega Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.2" (10 Bolt); 1.7812" ID Bearings; Fits Aftermarket Ring and Pinion; OEM Ring and Pinion Applications Require Part# 3106; Mega Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); Mega Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Mega Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.75" IRS; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.6" IRS; Excludes ZL1; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.875" (12 Bolt); Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.6" IRS; Excludes ZL1; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 8.6" IRS; Excludes ZL1; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound