Chevrolet Camaro Engine Control Module (ECM) Replacement

It was removed from a vehicle that ran well. This module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 300 miles

It is for vehicles with a 3.8L engine, 4-speed automatic transmission, and front-wheel drive. This part is for 4-door models. This is a programmable control module. The module must be programmed at a dealership to ensure driveability and emission standards.

Condition: Excellent (A)
Mileage: 194,100 miles

It is a programmable control module that fits vehicles with a 3.6L engine, automatic transmission, and front-wheel drive. This part was removed from a 4-door vehicle. The module must be programmed at a dealership to ensure driveability and emission standards.

Condition: Excellent (A)
Mileage: 129,700 miles

It is a programmable control module that was removed from a vehicle that ran well. This part is also known as a Powertrain Control Module (PCM).

Condition: Excellent (A)
Mileage: 68,300 miles

It was removed from a vehicle that ran well. This is a programmable module.

Condition: Excellent (A)
Mileage: 45,100 miles

This part is a programmable control module. It was removed from a vehicle that ran well.

Condition: Excellent (A)
Mileage: 81,400 miles

The vehicle it was removed from ran well. This module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 3,000 miles

This part was built for the US market; please verify your vehicle's 8th VIN digit is S (option code LGX). The module may need to be reprogrammed to your vehicle to work.

Condition: Excellent (A)
Mileage: 35,000 miles

It is for vehicles with the 3.6L engine (VIN S, 8th digit, option code LGX). The module may need to be reprogrammed to work with your vehicle.

Condition: Excellent (A)
Mileage: 2,600 miles

This is a programmable control module. It must be programmed at a dealership to ensure drive-ability and emission standards.

Condition: Excellent (A)
Mileage: 6,900 miles

This is a programmable control module. The module must be programmed at a dealership to ensure driveability and emission standards.

Condition: Excellent (A)
Mileage: 77,200 miles

This is a programmable control module. The module must be programmed at a dealership to ensure driveability and emission standards. This part was tested and the vehicle ran well.

Condition: Excellent (A)
Mileage: 57,700 miles

It is a programmable control module. This part fits vehicles with a 5.3L engine, 6-speed automatic transmission, and rear-wheel drive. It is for 4-door models.

Condition: Excellent (A)
Mileage: 52,800 miles

It fits vehicles with a 2.5L engine, 6-speed automatic transmission, and rear-wheel drive. It is compatible with option code 4EC. This is a programmable control module that must be programmed at a dealership to ensure driveability and emission standards.

Condition: Excellent (A)
Mileage: 125,900 miles

This is a programmable control module. It must be programmed at a dealership to ensure driveability and emission standards. This part was removed from a vehicle that ran well.

Condition: Excellent (A)
Mileage: 79,200 miles

This is a programmable control module. The module must be programmed at a dealership to ensure driveability and emission standards.

Condition: Excellent (A)
Mileage: 32,000 miles

It is for vehicles with a 2.0L engine, 8-speed automatic transmission, and rear-wheel drive. It fits 4-door models.

Condition: Excellent (A)
Mileage: 145,000 miles

Condition: Excellent (A)
Mileage: 105,000 miles

This is a programmable control module.

Condition: Excellent (A)
Mileage: 109,000 miles

with Original Equipment (OE) # 1228746 The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

Important: Vehicle Specific Flash Programming Required ON or OFF the Vehicle. Accurate VIN and Mileage are Required Important: Vehicle Specific On-Car Programming must be Performed AFTER Installation to Prevent Drivability and Starting Issues

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

The PROM(s)/CALPACK must be transferred from the original module to the replacement module Additional relearns (theft, crankshaft, idle, etc.) may be required

This part does not fit Denali models. This is a programmable control module that must be programmed at a dealership to ensure proper driving and emission standards.

Condition: Excellent (A)
Mileage: 163,000 miles

Stamped #1226864

Remanufactured Powertrain Control Module

Remanufactured