Chevrolet Camaro Engine Water Pump Replacement

OE Replacement

Pump Only

Standard Gasket

Standard Duty V-Belt Driven

It fits vehicles with the 5.7L engine.

Condition: Excellent (A)
Mileage: 107,900 miles

Metal Gasket

Pump only

Serpentine Belt Driven

Metal Impeller

High performance

Made in IT

Standard replacement

OE Replacement

Aluminum Body

It is designed for vehicles without a serpentine belt.

Condition: Excellent (A)
Mileage: 106,800 miles

It is for vehicles with the 3.6L engine.

Condition: Excellent (A)
Mileage: 1,000 miles

High Performance

Standard Duty V-Belt Driven

OE Replacement

Direct replacement

Direct replacement

It is for vehicles with a 3.8L (6-cylinder, 231 cubic inch) engine.

Condition: Excellent (A)

Pump only

Grade: Aftermarket Material Type: Metal Impeller Without Pulley; Without Gasket

Standard replacement

Pump Only

Heavy Duty High Performance Cast Iron Body

Mounting bolts included

High Performance

High performance

It is compatible with vehicles equipped with the 3.6L engine.

Condition: Excellent (A)
Mileage: 123,300 miles

High Performance

High performance

Heavy Duty V-Belt Driven

High Performance

OE Replacement

Pump Only

W/O Housing

Serpentine Belt Driven

with 5-Groove 127mm Pulley; without Thermostat or Water Outlet

Pump Only

Serpentine Belt Driven

Pump Only

It is designed for vehicles with a 2.0L turbocharged engine. It is an engine-mounted main pump and is for vehicles without a hybrid system.

Condition: Excellent (A)
Mileage: 128,700 miles

Mechanical Aluminum High Perf. Street Rods w/Aftermarket Serpentine Setup Reverse Rotation Block-To-Hub 5.625 in. 1.84 in. Inlet 3/4 in. Shaft OD As-Cast

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Satin

Incl. Thermostat

Mechanical Long Style; High Flow Model;SB Chevy; Finish:Satin

Mechanical; Aluminum; High Perf.; Long-Style; 5/8 in. Pulley Pilot Shaft; Block-To-Hub 7.3125 in.; 1.75 in. Inlet; 3/4 in. Shaft OD; As-Cast

GM Original Equipment; With GASKET; USE TOGETHER WITH 12618249 With PUMP PULLEY FOR 90 - 95 USAGE

Mechanical Long Style; High Flow Model;BB Chevy; Material:Aluminum; Finish:Satin

Mechanical Long Style; High Flow Model;SB Chevy; Finish:Polished

Mechanical Short Style; High Flow Model;BB Chevy; Material:Aluminum; Finish:Satin

Mechanical Aluminum High Perf. Reverse Rotation Block-To-Hub 5.625 in. 1.84in. Inlet 3/4in Shaft OD Polished 1955-68 StreetRods w/Aftermarket Serpentine Setup

Black 1.85in. Inlet Block-To-Hub 5.8125in. Aux. Outlets NPT/AN Fitting Ready 0.100in. Thicker Rear Cover Revised Impeller Entry Aluminum

Mechanical; Aluminum; High Perf.; Short-Style; Block-To-Hub 5.750 in.; 1.95 in. Inlet; 3/4 in Shaft OD; As-Cast

Pump Only

Aluminum Revised Impeller Entry 0.100in. Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet As-Cast

Mechanical; Aluminum; High Perf.; Short-Style; Block-To-Hub 5.750 in.; 1.95 in. Inlet; 3/4 in Shaft OD; Polished

Mechanical Short Style; High Flow Model;SB Chevy; Material:Aluminum; Finish:Polished

0.625 in. Pulley Pilot; High Volume Flow; Long Style; Natural Finish

Includes pump, back housing, thermostat and housing

Mechanical Short Style; High Flow Model;BB Chevy; Material:Aluminum; Finish:Polished

Mechanical Aluminum High Perf. Short-Style Block-To-Hub 5.625 in. 1.80 in. Inlet 3/4 in. Shaft OD As-Cast

Mechanical; Aluminum; High Perf.; Serpentine Belt Reverse Rotation; Block-To-Hub 6.9375 in.; 1.80 in. Inlet; 3/4 in Shaft OD; As-Cast

Mechanical Long Style; High Flow Model;BB Chevy; Material:Aluminum; Finish:Polished

Mechanical; Aluminum; High Perf.; Long Style; Block-To-Hub 6.9375 in; 1.80 in. Inlet; 3/4 in. Shaft OD; As-Cast

Pump Only

Cast Iron Heavy Duty V-Belt Driven

Heavy Duty High Performance Aluminum Body

Mechanical; Aluminum; High Perf.; Serpentine Belt Reverse Rotation; Block-To-Hub 6.9375 in.; 1.80 in. Inlet; 3/4 in Shaft OD; Polished

W/Housing; Excl. Thermostat

Pump Only

For Water Pump PN[8896] Requires 2 pc. Thermostat GM PN[12600172]

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Black

Aluminum; 0.625 in. Pulley Pilot; High Volume Flow; Long Style

Aluminum; Six Blade Impeller; Twisted Snout Design; Short; Not For Competition Use; Satin Finish

Aluminum; High Perf.; Front Inlet; w/8-Hole Billet Hub; Block-To-Hub 6 in.

High Performance; w/Front Inlet; 8-Hole Billet Hub; [Req. PRW March Performance/Edlebrock/Or Other Aftermarket Specialty Pulley]; Black Satin Powder-Coated

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Blue

Electric Engine Water Pump; Aluminum;Fits BB Chevy Engines; Finish:Black

Aluminum; Red Powder Coat; Fits BB Chevy Engines

Mechanical Aluminum High Perf. Short-Style Block-To-Hub 5.625 in. 1.80 in. Inlet 3/4 in. Shaft OD Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Blue

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Black

Electric Engine Water Pump; Aluminum; Red with Bowtie Logo; Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Red

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Red

Mechanical; Aluminum; High Perf.; Long Style; Block-To-Hub 6.9375 in; 1.80 in. Inlet; 3/4 in. Shaft OD; Polished

Electric Engine Water Pump; Aluminum;Fits BB Chevy Engines; Finish:Blue

Aluminum Revised Impeller Entry 0.100in.Thicker Rear Cover Aux. Outlets NPT/AN Fitting Ready Block-To-Hub 5.8125in. 1.85in. Inlet Polished

Satin Finish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet

Aluminum; 35 gpm.; Black Finish; Incl. Wiring Harness; Mounting Gaskets/Hardware

Electric Engine Water Pump; Aluminum;Fits SB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Polished

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Polished

Satin Finish Short-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block to Hub Height 1.84 in. Inlet w/Aftermarket Serpentine Belt Pulleys

Aluminum; 0.625 in. Pulley Pilot; Short Style

Electric Engine Water Pump; Aluminum;Fits SB Chevy Engines; Finish:Chrome

Satin Finish Long-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 6 15/16 in. Block To Hub Height 1.80 in. Inlet

Aluminum; Chrome with Bowtie Logo; Fits SB Chevy

Electric Engine Water Pump; Aluminum;Fits BB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Red

Electric Engine Water Pump; Aluminum;Fits BB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Black

Electric Engine Water Pump; Aluminum;Fits BB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Blue

-10 AN Aux. Fitting 90deg. To Block 3/4 in. Pilot Shaft 1.84 in. Inlet 5 13/16 in. Block To Hub Height Right Side Outlet Passage

Aluminum; 0.625 in. Pulley Pilot; Long Style

Electric Engine Water Pump; Aluminum;Fits BB Chevy Engines; Finish:Chrome

Pump Only

Satin Finish Long-Style Standard Rotation 3/4 in. Ball/Ball Bearing 6 15/16 in. Block To Hub Height 1.80 in. Inlet

Aluminum; 0.625 in. Pulley Pilot; Long Style

Elect.; 35gpm at 12 Volts/42gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.70in.; 2.5A Draw Dry; 8.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gskts/Hdw.; Black

Black FInish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 3/4 in. Block To Hub Height 1.95 in. Inlet

Long-Style Standard Rotation 3/4 in. Ball/Ball Bearing 6 15/16 in. Block To Hub Height 1.80 in. Inlet Size Polished Finish

Electric Engine Water Pump; Aluminum;Fits BB Chevy; Emblem:Chevy Bowtie Emblem; Finish:Chrome

Elect.; 35gpm at 12 Volts/42gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.50in.; 2.5A Draw Dry; 8.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gskts/Hdw.; Black

Elect.; 35gpm at 12 Volts/42gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.50in.; 2.5A Draw Dry; 8.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gskts/Hdw.; Polished

3/8 in. NPT Aux. Fitting 45deg. To Block 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 1.85 in. Inlet 5 13/16 in. Block To Hub Height

Black FInish Long-Style Standard Rotation 3/4 in. Ball/Ball Bearing 6 15/16 in. Block To Hub Height 1.80 in. Inlet

Satin Finish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 3/4 in. Block To Hub Height 1.95 in. Inlet

-8 AN Aux. Fitting 90deg. To Block 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 1.85 in. Inlet 5 13/16 in. Block To Hub Height

Elect.; 50gpm at 12 Volts/60gpm at 16 Volts; 7.50in. Depth; 2.8A Draw Dry; 8.9A Draw Wet; 0.75 in. NPT Hose Adpt; Incl. Pigtail/Gskts/Hdw.; Black Competition/Off Road/Race Use Only

Black FInish Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet

2 Piece Standard Rotation 5.8125 in. Block To Hub Height -10AN Aux. Outlet Ports/-6AN Top Inlet Port 1.85 in. Inlet Dia.

Short-Style Reverse Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block to Hub Height 1.84 in. Inlet Size Polished Finish

Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 5/8 in. Block To Hub Height 1.80 in. Inlet Size Polished Finish

Reverse Rotation 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 6 in. Block To Hub Height Satin Requires 2 pc. Thermostat GM PN[12600172]

Elect.; 50gpm at 12 Volts/60gpm at 16 Volts; 7.01in. Depth; 2.8A Draw Dry; 8.9A Draw Wet; 0.75 in. NPT Hose Adpt; Incl. Pigtail/Gskts/Hdw.; Polished Competition/Off Road/Race Use Only

Short-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5 3/4 in. Block To Hub Height 1.95 in. Inlet Polished Finish

Long-Style Standard Rotation 5/8 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 7 5/16 in. Block To Hub Height 1.875 in. Inlet Polished Finish

Reverse Rotation 3/4 in. Pilot Shaft 3/4 in. Ball/Ball Bearing 5.31 in. Block To Hub Height w/Left Side Return Outlet Satin

2 Piece Standard Rotation 6 in. Block To Hub Height 1.85 in. Inlet

Elect.; 50gpm at 12 Volts/60gpm at 16 Volts; 7.50in. Depth; 2.8A Draw Dry; 8.9A Draw Wet; 0.75 in. NPT Hose Adpt; Incl. Pigtail/Gskts/Hdw.; Polished Competition/Off Road/Race Use Only

Elect.; 40gpm at 12 Volts/48gpm at 16 Volts; 1.0in. NPT; 1.75in. Inlet; Depth 6.50 in.; 2.5A Draw Dry; 9.0A Draw Wet; Nipple Atch; Incl. Pigtail/Gaskets/Hdw; Black