Chevrolet Caprice Exhaust Pipe Flange Gasket Replacement

with Dual Exhaust Left Hand and Right Hand

with Single Exhaust Left Hand and Right Hand

Dual Exhaust

with Police Package

with Single Exhaust Left Hand and Right Hand

3in Bolt Pattern; Heat Riser

Donut Packing Ring 2-17/32 (in) Inside Diameter

Donut Packing Ring 2-1/32 (in) Inside Diameter

Type C Graphite/Wire Mesh

Optional Sintered Metal 2-17/32 (in) Inside Diameter

Optional Sintered Metal 2-1/32 (in) Inside Diameter

ID 2.00in, OD 2.50in Ring Type C Coil Wrap

Type C Graphite/Wire Mesh Exhaust Manifold to Exhaust Pipe

Donut Packing Ring 1-7/8 (in) Inside Diameter

Compressed Thickness: .064

1-63/64in Inside Diameter Graphite

2-11/16in Bolt Pattern with 3 Bolt Holes ; Heat Riser

2-1/2in I.D.; Sintered Metal

Ring Type E Graphite/Wire Mesh With Sleeve

Rope Packing 2-33/64in Inside Diameter Graphite

Ring Type B Sintered Metal Converter

Flange Type Perforated Steel Right Side of Engine

Packing

2-3/8in I.D. Without Flow Restrictor

Donut Packing Ring 2-3/8 (in) Inside Diameter

Replaces OE Part Number(s) 3981068 with 3 Bolt Holes 2-27/64in Inside Diameter 3-1/16in Bolt Pattern ; Heat Riser

with Single Rear Converter; Front

Ring Type E Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Ring Type E Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Donut Packing Ring 2-3/32 (in) ID Steel Sleeve

ID 2.00in, OD 2.50in Ring Type B Sintered Metal

Replaces OE Part Number(s) 92066863 with Converter

Ring Type E Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Replaces OE Part Number(s) 15912027; At Front Converter

Ring Type E, With 2 3/32in I.D. Graphite/Wire Mesh With Sleeve Exhaust Manifold to Exhaust Pipe

Ring Type A Steel and Composite Exhaust Pipe to Manifold

ID 2.25in Graphite Exhaust Manifold to Exhaust Pipe