Chevrolet Express 3500 Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 70 HD; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

For Use w/Dana Spicer 60 Dana Super 60

For Use w/Dana Spicer 80 Dana 80

with Open Differential Case Split 4.56 And Up with 35 Splines with Dana 70HD Axle

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana Super 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

Case Split 4.10 And Down with GM 10.5 Axle with Inventory until it is Depleted

For Chrysler 9.25", GM 9.25" IFS, 9.5"; Empty Case; Open; Use With Internal Kit GM9.5BI; 3.42 Ratio Carrier and Numerically Higher

Dana 70; Replacement; Standard; 4.56 And Up Carrier Break; For HD Rear End Dana 70 HD; Replacement; Standard; 4.56 And Up Carrier Break; For HD Rear End

10.5 in. 14 Bolt; Standard; 4.10 And Down Carrier Break GM 10.5 in. Full Float Rear; 14 Bolt Cover; Standard Open Carrier Case; 4.10 And Down Carrier Break; 4.125 in. Deck Height; Bare w/o Internal Gears~GM 10.5 in; 14 Bolt Cover; Standard; 4.10 And Down Carrier Break

Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible

9.5 in. 14 Bolt And 9.25 in.; Standard; Loaded GM 9.5 in.; 14 bolt cover; Loaded

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana Super 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

Dana 70; Power Lok; 4.10 And Down Carrier Break Dana 70 HD; Power Lok; 4.10 And Down Carrier Break

Dana 70; 35 Spline Dana 70 Super 35 Spline; 35 Spline

with Loaded Open Case with 3.73 Gear Ratio and Up with 35 Splines with Dana 80 Axle

with Open Differential Case Split 4.56 And Up with 35 Splines with Dana 70 Axle

Dana 80; 35 Spline; 4.10 And Up; non-ABS Dana 80; 35 Spline; 4.10 And Up; non-ABS

with Standard Differential with 37 Spline Teeth with 4.10 or Higher Rear Axle Ratio with Dana 80 Axle

Standard; Loaded Dana 70 Super 35 Spline

with Loaded Limited Slip Case Case Split 4.10 And Up with 37 Splines with Dana 80 Axle

with Standard Differential with 3.73 and Down Gear Ratio with 35 Spline Teeth with Dana 80 Axle

with Power-Lok Case Split 4.10 And Down with 35 Splines with Dana 70HD Axle

with Open Differential Case Split 4.56 And Down with 35 Splines with Dana 70 Axle