Chevrolet G20 Universal Joint Replacement

Standard Grade Grease Fitting in Cross 2 Joint Driveshaft

Standard Grade Grease Fitting in Cross Outside Lock Rings Incl. Inside and Outside Lock Rings

with 2 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

Standard Grade Grease Fitting in Cross 3 Joint Driveshaft 1.188" Bearing Cap Diameter Outside Lock Rings

Standard Grade Grease Fitting in Cross 2 Joint Driveshaft Outside Lock Rings 1.063" Bearing Cap Diameter

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Premium with Lube Fitting in Body

Standard Grade Grease Fitting in Cross 2 Joint Driveshaft 1.125" Bearing Cap Diameter Incl. 4 Inside Lock Rings

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Greasable Premium with Lube Fitting in Body with Steel Driveshaft & Steel Driveshaft Yoke

with 3 Joint Driveshaft Premium

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Premium U-Joint w/ 3 Joint Shaft

Grease Fitting in Cross Performance Grade Inside Lock Rings

Grease Fitting in Cross 3 Joint Driveshaft Performance Grade

Grease Fitting in Cross 2 Joint Driveshaft Performance Grade 1.188" Bearing Cap Diameter Outside Lock Rings

Standard Grade Grease Fitting in Cross 3 Joint Driveshaft 1.063 & 1.125" Bearing Cap Diameters

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; Premium U-Joint w/ 125" Wheel Base, Alum. Driveshaft

1.065 Bearing Cap Diameter with 3.625 Outside Lock-up ; Premium U-Joint

Standard Grade 2 Joint Driveshaft Sealed Unit 1.188" Bearing Cap Diameter Outside Lock Rings

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; For Aluminum Drive Shaft w/ 3 Joint Shaft

with 2 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Premium U-Joint

1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium with Spicer 1350

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Non-Greasable Super Strength U-Joint

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) 1.063 (in) Bearing Caps Non-Greasable Super Strength U-Joint

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; For Aluminum Drive Shaft

Grease Fitting in Cross 2 Joint Driveshaft Performance Grade Outside Lock Rings

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Brute Force Greaseable w/ 3 Joint Shaft

with 3 Joint Driveshaft Non-Greasable Super Strength U-Joint

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Brute Force Non Greaseable

1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint

with 2 Joint Driveshaft Greasable Premium

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; Brute Force Non Greaseable

1.063 Bearing Cap Diameter with 3.622 Outside Lock-up ; Brute Force Greaseable

with 3.622 Outside Lock-up 1.188 Bearing Cap Diameter ; Brute Force Non Greaseable

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Greasable Super Strength U-Joint

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) 1.063 (in) Bearing Caps Greasable Super Strength U-Joint

2 Joint Driveshaft Performance Grade Grease Fitting in Bearing Cap Incl. 2 Inside and 2 Outside Lock Rings

1.125 Bearing Cap Diameter with 2.557 Inside Lock-Up ; Brute Force Greaseable

with 3.622 Outside Lock-up 1.188 Bearing Cap Diameter ; Brute Force Greaseable

with 3 Joint Driveshaft with 1-1/16 (in) Outside Diameter Bearing(s) Greasable Premium with Lube Fitting in Bearing Cup

with 2 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; Brute Force Greaseable w/ 125" Wheel Base, Alum. Driveshaft

with 3 Joint Driveshaft Greasable Super Strength U-Joint

1.125 in. Bearing Cap Diameter with 2.560 in. Inside Lock-Up with 3.622 in. Outside Lock-up ; For Aluminum Drive Shaft w/ 125" Wheel Base, Alum. Driveshaft

Sealed Unit Coated for Aluminum Driveshaft Incl. 2 Inside and 2 Outside Lock Rings

Grease Fitting in Cross Outside Lock Rings Coated for Aluminum Driveshaft

with 2 Joint Driveshaft Greasable Super Strength U-Joint with Combination U-Joint (354 x 534G)

1.063 in. Bearing Cap Diameter with 3.218 in. Outside Lock-up ; Brute Force Non Greaseable w/ 3 Joint Shaft

Greaseable with 3.42 Gear Ratio 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Steel Driveshaft

1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint

Inside Snap Ring Dimension of 2.556in with 2 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

1.125in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft

with 2 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable

1310 Yoke w/Zerk Fitting On Cross; 3.219 in. Snap Ring Span; 1.062 in. Cap Dia. 1310 U/Joint; with outside snap rings; with zerk fitting.~GM 8.5 in.

Mechanics 3R 2.556 in. Snap Ring Span; 1.125 in. Cap Dia.; Inside Snap Ring GM 8.5 in.~Mechanics 3R U/Joint; with zerk fitting.

Lifetime Series; 1.718 in. Snap Ring Span; 1.062 in. Cap Dia.; Inside Snap Ring 1310 Lifetime U/Joint. Without zerk fitting.~GM 8.5 in.

1330 Yoke; To Mechanics 3R Adapter 1330 to Mechanics 3R Lifetime conversion U/Joint; without zerk fitting.~GM 8.5 in.

1350 Joint; w/Zerk Fitting; 3.625 in. Snap Ring Span; 1.118 in. Cap Dia.; Outside Snap Ring 1350 U/Joint; with zerk fitting.~GM 10.5 in.; 14 Bolt Cover~GM 8.5 in.

Lifetime Series ; 3.625 in. Snap Ring Span; 1.188 in. Cap Dia.; Outside Snap Ring 1350 Lifetime U/Joint; without zerk fitting.~GM 10.5 in.; 14 Bolt Cover~GM 8.5 in.~GM 9.5in.; 14 bolt cover

Adapts 1310 Yoke To 1330 Yoke; 1310 Side 3.219 in. Span; 1.062 in. Caps; 1330 Side 3.625 in. Span; 1.062 in. Caps; Both Sides Are Outside Snap Ring 1310 to 1330 conversion U/Joint. All caps are 1 1/16 in. diameter.~GM 8.5 in.

1410 Yoke; w/Zerk Fitting; 4.188 in. Snap Ring Span; 1.118 in. Cap Dia. 1410 driveline U/Joint; with zerk fitting.~GM 10.5 in.; 14 Bolt Cover

Mechanics 3R Lifetime Series; 2.556 in. Snap Ring Span; 1.125 in. Cap Dia.; Inside Snap Ring GM 8.5 in.~Mechanics 3R Lifetime U/Joint; without zerk fitting.

1410 Lifetime Series; 4.188 in. Snap Ring Span; 1.188 in. Cap Dia.; Outside Snap Ring 1410 Lifetime driveline U/Joint; without zerk fitting.~GM 10.5 in.; 14 Bolt Cover

Adapts 1350 Yoke To 1410 Yoke 1350 to 1410 conversion U/Joint.~GM 10.5 in.; 14 Bolt Cover~GM 8.5 in.~GM 9.5in.; 14 bolt cover

1310 Yoke To Mechanics 3R Adapter 1310 to Mechanics 3R U/Joint; without zerk fitting.~GM 8.5 in.

Adapts 1350 Yoke To Mechanics 3R 1350 to Mechanics 3R conversion joint.~GM 10.5 in.; 14 Bolt Cover~GM 8.5 in.

with Aluminum Driveshaft Premium Chemically Coated

with 2 Piece Rear Driveshaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

Non-Greasable with 3.42 Gear Ratio with Steel Driveshaft 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with New Replacement Part

1.125in Bearing Cap Diameter Greaseable with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Inside Snap Ring Dimension of 2.556in with 1 Piece Rear Driveshaft

with 2 Piece Rear Driveshaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

1.125in Bearing Cap Diameter Inside Snap Ring Dimension of 2.556in with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Non-Greasable with 1 Piece Rear Driveshaft

Greasable Premium with Aluminum-Graphite Driveshaft

Inside Snap Ring Dimension of 2.556in with 2 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

OE Design with 2 Piece Rear Driveshaft 1.188in Bearing Cap Diameter Non-Greasable with 3.625in Outside Snap Ring Dimension with Uncoated

Greaseable with 3.42 Gear Ratio 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Steel Driveshaft

with 2 Piece Rear Driveshaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Greaseable

Non-Greasable with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Chemically Coated with Aluminum Driveshaft

with 2 Joint Driveshaft Non-Greasable Super Strength U-Joint

Inside Snap Ring Dimension of 2.556in with 2 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Greaseable

Greaseable with 3.42 Gear Ratio 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Steel Driveshaft

Greaseable with 3.42 Gear Ratio 1 Piece Driveshaft 1.062in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension with Steel Driveshaft

Non-Greasable with 2 Piece Rear Driveshaft 1.125in Bearing Cap Diameter Inside Snap Ring Dimension of 2.556in

Professional; Premium; Greaseable

with 2 Piece Rear Driveshaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable

with 2 Piece Rear Driveshaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Greaseable with Uncoated

Greaseable with 3.625in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter Chemically Coated with Aluminum Driveshaft

with 1 Piece Rear Driveshaft Chemically Coated

1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint Optional

with 2 Piece Rear Driveshaft with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter Non-Greasable with Blue Coated