Chevrolet K10 Drive Shaft Replacement

w/10 Bolt Differential Cover wo/Fill Plug On Differential Cover

10 Bolt Differential Cover 8.5 In. Ring Gear

with 27.87 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

with 24.80 (in) Long Driveshaft Measurement taken from the centerline of the furthest U-Joint at one end to the centerline of the furthest U-Joint on the opposite end of the collapsed Prop Shaft

with 29.53 (in) Long Driveshaft with Flange at Transfer Case Measurement taken from End of the Flange to the Center of U-Joint on the Opposite Side

w/NP203 Full Time Transfer Case

10 Bolt Differential Cover 8.5 In. Rear Axle

12 Bolt Differential Cover 8.87 In. Rear Axle

8.87 In. Rear Axle

1 Piece Shaft Assembly w/NP203 Full Time Transfer Case

1 Piece Shaft Assembly w/NP205 Part Time Transfer Case

w/NP205 Part Time Transfer Case