Chevrolet K3500 Differential Replacement

Dana 80 Dana 80

Dana 60/70/70U/70HD Dana 70 HD~Outer slinger; 2.250 in. O.D.

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 70 HD

30 Spline; 1.50 in. Axle Shaft Diameter; Rear 10.5 in.; All Ratios Replaces the Conventional [Non-Locking] Internals Only~Removal Of Thrust Washers Required

Fits 3.73 Gear Ratio And Up; 4320 Chromoly Spider Gears

30 Spline GM 10.5 in Rear; Yukon Grizzly Locker; 30 Spline; Installs into Standard Open Carrier Case; Diffenetial has 14 Bolt Cover & Removable Pinion Support~GM 10.5 in; 14 Bolt Cover; 30 Spline

Fits 2.76-3.42 Gear Ratio; 4320 Chromoly Spider Gears

30 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear 10.5 in.

37 Spline; 1.60 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 80

37 Spline; Dana 80; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio

GM 10.5 in.; 14 Bolt; 30 Spline; 4.10 And Down Ring Gear Pinion Ratio; 1.50 in. Axle Shaft Diameter

Yukon Dura Grip; Dana 60; 35 spline; Front; Positraction; 4.30 and Down Ratios or Thick Gears; 4 Pinion Design

Yukon Dura Grip; Dana 60; 35 spline; Front; Positraction; 4.56 and Up Ratios; 4 Pinion Design

10.5 in. 14 Bolt; 4.10 And Down GM 10.5 in.; 14 Bolt Cover; 4.10 And Down~Yukon Dura Grip Positraction; GM 10.5 in. / 14T Rear; 14 Bolt Cover; 30 Spline; 4.10 And Down or Thick Gears

Yukon Dura Grip positraction for Dana 70; 4.10 to 7.17 ratio; fits 35 spline axles~Yukon Dura Grip Positraction; Dana 70 Rear; 35 spline; 4.10 and down ratios

Open To Lock; Dana 70; 40 Spline; 4.10 Gear Ratio Down

Yukon Dura Grip positraction for Dana 80; 35 spline axles; 3.73 and down ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 35 spline; 3.73 and down ratios

Yukon Dura Grip positraction for Dana 80; 35 spline axles; 4.10 and up ratios~Yukon Dura Grip Positraction; Dana 80 Rear; 35 spline; 4.10 and up ratios

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Axle: GM Full float 14B 10.5" Shaft: 1.56" Spline: 30 Ratio: All 4.56 and up ratios must use a 'thick' gear, confirm axle is 14B full float

Axle: D80 Full Float 11.5" Shaft: 1.50" Spline: 35 Ratio: 3.73 and down Confirm axle is D80. Confirm axle spline count, Air Locker flange must be drilled for 9/16" bolts

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; Dana 70; 35 Spline; 4.56 Gear Ratio Down

Open To Lock; Dana 80; 35 Spline; 4.10 Gear Ratio Up

Open To Lock; Dana 80; 35 Spline; 3.73 Gear Ratio down

Dana 70; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 10.5 in. Ring Gear Diameter