Chevrolet K3500 Exhaust Muffler Replacement

Bracket May Be Required Regular Duty Muffler Modifications and/or Additional Parts May Be Required for Installation

Regular Duty Muffler Single Outlet Muffler Replaces Dual Outlet with 2.5 (in) Muffler Inlet Modifications and/or Additional Parts May Be Required for Installation

Modifications and/or Additional Parts May Be Required for Installation

DIRECT FIT MSL/MAXIMUM Muffler with Single Tailpipe Option

with 3 (in) Muffler Inlet Requires 35667 And Two 35564 Modifications and/or Additional Parts May Be Required for Installation

Old Body Style; DIRECT FIT MSL/MAXIMUM Muffler OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced. Over 8500 lbs. G.V.W.

Under 8500 Gross Vehicle Weight (GVW) with Dual Inlets If welded assembly, replace all required parts

Regular Duty Muffler with 2.5 (in) Muffler Inlet with Dual Outlets If welded assembly, replace all required parts

If welded assembly, replace all required parts

with 3 (in) Muffler Inlet If welded assembly, replace all required parts

3.0 in. Center Inlet/2.25 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Chassis w/ Cab - 15000 Lbs. GVW - Wheelbase 135"

3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel

2.5 in. Center Inlet/2 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.0 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

3.0 in. Center Inlet/2.25 in. Dual Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.0 in. Offset Inlet/Center Outlet; Case Dimensions 5 in. x 10 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.75 in. Dual Inlet/2.5 in. Dual Outlet; Case Dimensions 5 in. x 12 in. x 22 in.; 28 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

Direct-Fit; Oval; 3.0 in. Inlet/2.50 in. Outlet; 5.5 in. H x 11 in. W x 23 in. Muffler L/29 in. Overall L; Center/Offset; Not Reversible; Stainless Steel

9.62 in. Round; 4.02 in. Center Inlet/4 in. Center Outlet; 23.25 in. Length; 27.5 in. Overall Length; Satin Finish