Chevrolet Monte Carlo Electric Fuel Pump Replacement

An engine oil pressure switch may be required A fuel pump block-off plate may be required

Recommend to replace Wiring Harness FW900 Includes Tank Seal Strainer required to validate the warranty: F131S

12 volt 2.5 to 4.5 pounds of pressure Requires 3" x 5" Mounting Area

Universal 12 Volt 5 to 9 pounds of pressure. Requires 3" x 5" Mounting Area

w/ CAE or CEH on Wiring Harness Tag

with digital dash; Platinum Pro Part New Strainer Required For Warranty

1 locking tab on internal pump connector. 38mm body with brass return jet on pump body and black jet hose.

(Universal Inline) (12 Volt 4 to 6 PSI) Requires 3" x 6" Mounting Area

For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34

An engine oil pressure switch may be required A fuel pump block-off plate may be required

340 LPH E85 Compatible; Pump Center Offset; Hardware Kit;50 State Legal/California Emissions Compliant

350 LPH; Incl. Pre-Calibrated Fuel Level Sending Unit;50 State Legal/California Emissions Compliant