Chevrolet P30 Engine Valve Lifter Replacement

Flat Hydraulic Lifters 0.440 (in) Wide Oil Ring Groove Box of 128 Bulk Pack

Hydraulic High Revolution Engines Box of 128

Hydraulic Lifter

Flat Hydraulic Lifters 0.440 (in) Wide Oil Ring Groove

Hydraulic High Revolution Engines

with Roller Lifters Hydraulic Roller Lifters Box of 128 Bulk Pack

Non Active Fuel Management Engine This Application Requires The Use Of A Non Active Fuel Management (AFM) Lifter; Refer To GM Bulletin # 13-06-01-002 Hydraulic Roller Lifters Riveted Retaining Pin Box of 128 Bulk Pack

with Roller Lifters Hydraulic Roller Lifters

Non Active Fuel Management Engine This Application Requires The Use Of A Non Active Fuel Management (AFM) Lifter; Refer To GM Bulletin # 13-06-01-002 Hydraulic Roller Lifters Riveted Retaining Pin

Hydraulic Roller Lifters Box of 108 Bulk Pack

Hydraulic Roller Lifters Box of 1

Second Design Without Machined Line

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Hydraulic Roller

.842 Inch Retro-Fit Hydraulic Roller Lifter Use With 22141, 22236 Camshafts Up to 6,500 RPM Capability .120 Inch Plunger Travel, .700 Inch Wheel Diameter Recommended Spring Pressures Are 100-180 Lbs Seat Pressure And 280-380 Lbs Open Pressure Contains 16 Lifters With Vertical Tie Bar

Part Application Notes Replaces BB969RF16 .842 Inch Retro-Fit Hydraulic Roller Lifter Use With 22141, 22236 Camshafts Up to 6,500 RPM Capability .120 Inch Plunger Travel, .700 Inch Wheel Diameter Recommended Spring Pressures Are 100-180 Lbs Seat Pressure And 280-380 Lbs Open Pressure Contains 16 Lifters With Vertical Tie Bar

.842 Inch Retro-Fit Hydraulic Roller Lifter Use With 22135, 22136, 22237, 22238, 22398 Camshafts Up to 6,500 RPM Capability .120 Inch Plunger Travel, .700 Inch Wheel Diameter Recommended Spring Pressures Are 100-180 Lbs Seat Pressure And 280-380 Lbs Open Pressure Contains 16 Lifters With Vertical Tie Bar

Part Application Notes Replaces SB079RF16 .842 Inch Retro-Fit Hydraulic Roller Lifter Use With 22135, 22136, 22237, 22238, 22398 Camshafts Up to 6,500 RPM Capability .120 Inch Plunger Travel, .700 Inch Wheel Diameter Recommended Spring Pressures Are 100-180 Lbs Seat Pressure And 280-380 Lbs Open Pressure Contains 16 Lifters With Vertical Tie Bar

Body Dia. 0.903in.; Brg. Dia. 0.810in.; Steel A Body Centerline Lightweight Version; 20396 Series Push Rod Requires Roller Camshaft~Extra Tall Version To Fit Late Bow-Tie Blocks~w/Raised Lifter Bosses