Chevrolet S10 Differential Bearing Kit Replacement

For GM 7.5"/7.625"

For GM 8.5"/8.625" (10 Bolt); 3.06" Carrier Cup OD, 1.78" Carrier Cone; Includes Timken Bearings, Bearing Races

Standard Design; 8.5 In. Ring Gear

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Standard Design; 8.5 In. Ring Gear

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5"/8.625" (10 Bolt); Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.2" IFS; Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Seals (Axle, Pinion), and Thread Locking Compound

For GM 8.625" (10 Bolt); Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.2" IFS; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5"/8.625"; Master Bearing Kit Includes Koyo Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.625" (10 Bolt); Includes Early One Piece (1.52" ID) and Late Two Piece (1.73" ID) Pinion Seal; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5"/8.625" (10 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Standard Design; 7.5 In. Ring Gear

For GM 7.2" IFS; Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

For GM 7.2" IFS; Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 7.5 In. Ring Gear

For GM 8.5"/8.625" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.625" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

Standard Design; 7.5 In. Ring Gear

Standard Design; 8.875 In. Ring Gear

For GM 7.5"/7.625" (10 Bolt); Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, Ring Gear Bolts, Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); First Design One Piece Pinion Seal (Non Triple Lip) ID 1.52"; Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 8.5"/8.625" (10 Bolt); Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Pinion Seal, and Thread Locking Compound

Improved Design; 8.875 In. Ring Gear

For GM 8.5"/8.625" (10 Bolt); Super Bearing Kit Includes Koyo Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

For GM 7.5"/7.625" (10 Bolt); Mega Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound

Improved Design; 8.5 In. Ring Gear

For GM 8.5"/8.625" (10 Bolt); Super Bearing Kit Includes Timken Tapered Bearings (Axle, Carrier, Front and Rear Pinion, Pilot where applicable), Brush, Cover Gasket (or RTV), Crush Sleeve (or Preload Shim Pack), Marking Compound, Pinion Nut, Ring Gear Bolts, Seals (Axle, Pinion), Shims (Pinion, Carrier), and Thread Locking Compound