Chevrolet S10 Differential Pinion Seal Replacement

1.938 Shaft Diameter 2.762 Bore Diameter 2.766 Outside Diameter Seal 0.500 Width with 8.50, 8.625 Ring Gear 1st Design

1.732 Shaft Diameter 2.653 Bore Diameter 2.658 Outside Diameter Seal 0.547 Width with 7.62 Ring Gear

7.2 in.; 7.625 in. 10 Bolt Or Rear ; Aftermarket seal; 2.660 in. O.D. x 1.5 in. I.D.~GM 7.5 in. and 7.6 in.

8.2 in. 10 Bolt GM 8.5 in.; Rear

1st Design with 8.5 (in) Ring Gear 0.5 (in) Width with AAM Axle 2.766 (in) Outside Diameter

2nd Design with 7.625 (in) Ring Gear 0.375 (in) Width with AAM Axle 2.657 (in) Outside Diameter

2.125 Shaft Diameter 2.763 Bore Diameter 2.767 Outside Diameter Seal 0.500 Width with 8.50, 8.625 Ring Gear

7.625" Ring Gear FAG Global Number 413 2796 100

7.625" Ring Gear FAG Global Number 413 2983 100 1.938" Shaft

8.5 in. Ring Gear - 1st Design

with 8.625 (in) Ring Gear with AAM Axle

1.524 Shaft Diameter 2.656 Bore Diameter 2.660 Outside Diameter Seal 0.607 Width with 7.50, 7.625 Ring Gear

11.50" Ring Gear FAG Global Number 413 2923 100

8.50",8.625" Ring Gear FAG Global Number 413 3119 100

1.520 Shaft Diameter 2.656 Bore Diameter 2.660 Outside Diameter Seal 0.425 Width with 7.25 Ring Gear

7.5 in., 7.63 in. Ring Gear 1.6 in.

For Use w/Triple Lip GM 8.6 in.; For Use w/Triple Lip

Differential Pinion Seal; 7.625 RING GEAR SAGINAW-AMERICAN; 2nd Design; With 2 PIECE PINION SEAL (TRIPLE LIP)) (FOR 1st DESIGN SEE 26026792

8.5", 8.625" Ring Gear

with 7.625 (in) Ring Gear with AAM Axle

with 7.25 (in) Ring Gear with AAM Axle Independent Front Suspension

w/ 8.50" or 8.625" Ring Gear

with 7.25 (in) Ring Gear with AAM Axle Independent Front Suspension

7.25" Ring Gear FAG Global Number 413 2585 100

7.50",7.625" Ring Gear FAG Global Number 413 2588 100 1.500" Shaft

7.5 in., 7.63 in. Ring Gear

w/ 8.50" or 8.625" Ring Gear

10.50" Ring Gear FAG Global Number 413 3190 100

Excluding 8.50" & 8.625" Ring Gears

7.625 in. 10 Bolt GM 7.5 in. and 7.6 in.~Triple lip design