Chevrolet S10 Suspension Shock Absorber Replacement

without Sport Package

Excludes ZR2 off road suspension ; w/0-2 in. Lift

Recommended OE Application -Specific Replacement

For Use w/ZR2 Package; 19.07 in. Extended; 12.07 in. Collapsed; w/0 - 3 in. Lift

26.07 in. Extended; 15.57 in. Collapsed; w/0 - 2 in. Lift

FRONT SHOCK - 3" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 12.3" EXTENDED, 8.1" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

For PN[K2025/K2026/K2084/K4051/K3018/K3001/K2166/K4089/K4090/K4085/K4086/K2019/K2020/K2085/K2027/K1050/K2088/K2108/K2109/K4052]; w/2.5 - 5.5 in. Lift

REAR SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN INCLUDES QUANTITY 1, 1.5" WIDE SLEEVE FOR UP TO A 9/16+"/14MM BOLT 24.5" EXTENDED, 14.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

FRONT SHOCK - STOCK HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, LARGE DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN FEATURES A VULCANIZED RUBBER LOWER BUSHING 15.0" EXTENDED, 9.5" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Recommended OE Application -Specific Replacement

Stabilizer protective boots cannot be used Recommended OE Application -Specific Replacement

Optional Twin Tube Replacement

26.07 in. Extended; 15.57 in. Collapsed; w/0 - 2 in. Lift

FRONT SHOCK - 2" DROP HEIGHT (1 PC) SHOCKS MUST BE MOUNTED WITH THE BODY OF THE SHOCK AT THE BOTTOM & THE SHAFT AT THE TOP INCLUDES QUANTITY 2, SMALL DIAMETER STEM BUSHINGS & WASHERS INCLUDES QUANTITY 1, BAR PIN FOR A 2.5-3" BOLT PATTERN 13.3" EXTENDED, 8.6" COLLAPSED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Optional Twin Tube Replacement

w/Black Boot; 26.07 in. Extended; 15.57 in. Collapsed; w/0 - 2 in. Lift

w/Black Boot; 19.07 in. Extended; 12.07 in. Collapsed; w/0 - 3 in. Lift

without Sport Package Recommended OE Application -Specific Replacement

25.07 Extended 15.07 Collapsed Wheel Drive: 4WD Lift: With Rear 2 in. - 3 in. Lift

14.42 Extended 9.54 Collapsed Lift: With Front Factory Ride Height

26.07 Extended 15.57 Collapsed Wheel Drive: 4WD Lift: With Rear 2 in. - 3 in. Lift or Rear 5 in. - 6 in. Lift

19.57 Extended 12.32 Collapsed Lift: With Front 6 in. Lift

24.00 Extended 14.50 Collapsed Wheel Drive: 4WD Lift: With Rear 0 in. - 1 in. Lift

24.00 Extended 14.50 Collapsed Wheel Drive: 4WD Lift: With Front 5 in. - 6 in. Lift

With Bar Pin Upper Mount and Eye Lower Mount Sold Individually 26.07 Extended 15.57 Collapsed Wheel Drive: 4WD Lift: With Rear 5 in. - 6 in. Lift

Sport Suspension

Optional Twin Tube Replacement

without ZQ8 Package Performance Monotube Shock Absorber

Recommended OEM Replacement

Performance Monotube Shock Absorber

Recommended OEM Replacement

Increased Capacity Suspension, Suspension Code:BT, 3B

Performance Monotube Shock Absorber

Recommended OEM Replacement

Increased Capacity Suspension

with Rancho Suspension System with Front Raised Height 3.0 (in)

with Front Raised Height 0 (in)

with Rear Raised Height 0 (in) to 2.0 (in)

with Rear Raised Height 0 (in)

For Use w/ZR2 Package; 19.07 in. Extended; 12.07 in. Collapsed; w/0 - 3 in. Lift

Without ZQ8 Sport Suspension Package

Without ZQ8 Sport Suspension Package

Lowering Rate: F: 2.0-5.0"

Lowering Rate: F: 0.0"

Lowering Rate: R: 0.0-3.0"

Lowering Rate: F: 1.0-3.0"

Lowering Rate: F: 0.0-2.0"

Lowering Rate: R: 3.0-5.0"

Lowering Rate: F: 0.0"

with Rear Raised Height 0 (in)

with Rear Raised Height 0 (in) to 2.0 (in)

with Rancho Suspension System with Front Raised Height 3.0 (in)

with Front Raised Height 0 (in) to 2.0 (in)

with Front Raised Height 0 (in)

with Rancho Suspension System with Front Raised Height 3.0 (in)

For Use w/ZR2 Package; 19.07 in. Extended; 12.07 in. Collapsed; w/0 - 3 in. Lift

26.07 in. Extended; 15.57 in. Collapsed; w/0 - 2 in. Lift For Use w/ZR2 Package

Increased Capacity Suspension, Suspension Code:BT, 3B

Maximum Monotube Performance Upgrade Standard Suspension or Lowered Suspensions up to 2 inches

Maximum Monotube Performance Upgrade Standard Suspension

SN14: Fits Vehicles with 0"-3" Rear Lowering

SN5: Fits Vehicles with 3"-5" Rear Lowering Lowering Rate: R: 3.0-5.0"

Lowering Rate: F: 1.0-3.0"

Lowering Rate: F: 0.0-2.0"

SN21: Fits Vehicles with 2"-5" Front Lowering Lowering Rate: F: 2.0-5.0"

Maximum Monotube Performance Upgrade Standard Suspension

Lift Replacement Shocks Lift = 0-2

with Rancho Suspension System with Front Raised Height 3.0 (in)

Increased Capacity Suspension

Increased Capacity Suspension

27.07 in. Extended; 15.94 in. Collapsed; w/0 - 3 in. Lift For Use w/ZR2 Package

Maximum Monotube Performance Upgrade Lowered 4 Inches

Increased Capacity Suspension

90/10 Series; Front; w/0 in. Lift/Drop Not For Street Use

with Front Raised Height 0 (in) Front Shock must be Installed Rod End Down (without shock boot kit)

with Rear Raised Height 0 (in) to 2.0 (in)

70/30 Series; Front; w/0 in. Lift/Drop

Ridetech HQ Series Shock Single Adjustable 4.75in Stroke T-Bar/Stud Mounting 8.55in x 13.3in