1992-2004 Chevrolet S10 Electronic Shift 2-Speed Transfer Case Motor (New OEM)

Partslink #: 420-00134

This is a BRAND NEW part. This transfer case switch is for vehicles with option code NP1.

Condition: Excellent (A)

$79.95 View part →

✓ In Stock

1999-2004 Chevrolet S10 Transfer Case Shift Motor (Used OEM)

Partslink #: 420-00142

It is for vehicles equipped with option code NP8.

Condition: Excellent (A)
Mileage: 68,300 miles

$99.95 View part →

✓ In Stock

1998-2001 Chevrolet S10 Transfer Case Motor (Dorman)

Partslink #: 600-906

Fits New Venture Gear 136/236/246 Rectangular Plug w/2 Pins w/RPO Code NP4 (All Wheel Drive Transfer Case)

$138.95 View part →

✓ In Stock

1992-2004 Chevrolet S10 Transfer Case Motor (Dorman)

Partslink #: 600-900

Fits New Venture Gear 233 Rectangular Plug w/7 Pins w/RPO Code NP1 (2 Speed, Electronic Shift, Transfer Case)

$139.95 View part →

Connector Gender: Female, Connector Quantity: 1, Connector Shape: Rectangle, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Quantity: 7, Terminal Type: Blade, Wiring Harness Included: No

✓ In Stock

1992-2004 Chevrolet S10 Transfer Case Motor (Cardone)

Partslink #: 48-107

with 7 Terminal Plug(s)

$213.09 View part →

Connector Gender: Female, Connector Quantity: 1, Connector Shape: Rectangle, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Quantity: 2, Terminal Type: Blade, Wiring Harness Included: No

✓ In Stock

1998-2001 Chevrolet S10 Transfer Case Motor (Cardone)

Partslink #: 48-103

with 2 Terminal Plug(s)

$229.89 View part →

✓ In Stock

1998-2001 Chevrolet S10 Transfer Case Motor (Cardone)

Partslink #: 83-103

with 2 Terminal Plug(s)

$240.90 View part →

✓ In Stock

2000-2004 Chevrolet S10 Transfer Case Motor (Dorman)

Partslink #: W0133-2080964

Transfer Case Code NP1

$241.20 View part →

Connector Gender: Female, Connector Quantity: 2, Connector Shape: Square, Contains Electronic Components: No, Does it require SDS: No, FAA_A1: Do Not Operate The Motor While It Is Off The Transfer Case. This Can Damage The Motor And Set An Error Code That Must Be Cleared Before The Motor Will Operate Again. Shift The Transfer Case Into The Position Of The Motor To Install., FAA_A2: Yes, The Transfer Case Should Be Manually Shifted Into The Two-wheel Drive Position At The Shift Shaft Before The Installation Of The Replacement Motor. Typically The Positions Are Spring-loaded And Can Be Rotated Manually., FAA_A3: A Crescent Wrench Can Be Used For This Operation., FAA_A4: The Replacement Motor Drive Is Factory-set In The 2 Wheel Drive Position., FAA_A5: This May Be Caused By A Transfer Case Control Module Calibration Issue. Check For Dtc's And Calibration Version ? There May Be A Software Update From The Original Equipment Manufacturer., FAQ_Q1: The Replacement Motor Drive Is In A Different Position, Can I Reposition Before Installing?, FAQ_Q2: Can I Install The Replacement Motor If My Transfer Case Motor Failed In 4 Wheel Drive Low Or High?, FAQ_Q3: What Tool Can I Use To Manually Shift The Transfer Case Into The Two-wheel Drive Position Before I Install The Replacement Motor?, FAQ_Q4: What Drivetrain Position Is The Replacement Motor Drive Placed In?, FAQ_Q5: The Service 4wd Light Is On And/or The 4wd Is Inoperative. What Could Cause This Condition?, FAQ_Q6: If The Motor Attempts To Shift, But Sounds Weak, Check The Front Axle Lock Actuator. If The Axle Lock Does Not Engage, The Motor Cannot Complete Its Engagement., Gear of Chain Type: Gear, Grade Type: Performance, Is Item A Chemical: No, Is Or Contains A Battery: No, Is Or Contains A Bulb: No, Is Prop Sixty Five Affected: No, Is the item CARB affected: No, Mounting Hardware Included: No, Mounting Hole Quantity: 3, Product Condition: Remanufactured, Shift Operation Type: Electronic, Sprocket Tooth Quantity: 4, Terminal Gender: Male, Terminal Type: Blade, Wire Quantity: 4, Wiring Harness Included: Yes, Wiring Harness Length: 15.75

✓ In Stock

1999-2004 Chevrolet S10 Transfer Case Motor (Cardone)

Partslink #: 48-105

with 4 Terminal Harness Plug with 6 Terminal Plug(s)

$241.89 View part →

✓ In Stock

1998-2004 Chevrolet S10 Transfer Case Motor (Dorman)

Partslink #: 600-901

Fits New Venture Gear 136/236/246 Square Plug w/4 Pins w/RPO Code NP8 (2 Speed, Push Button Shift, Transfer Case)

$261.53 View part →

✓ In Stock

2000-2004 Chevrolet S10 Transfer Case Motor (Dorman)

Partslink #: W0133-2080144

Transfer Case Code NP4+NP8

$288.06 View part →

✓ In Stock

2000-2004 Chevrolet S10 Transfer Case Motor (Autopart International)

Partslink #: W0133-5275707

Transfer Case Code NP4+NP8

$320.00 View part →

✓ In Stock

2000-2004 Chevrolet S10 Transfer Case Motor (Cardone)

Partslink #: W0133-2228761

Transfer Case Code NP4+NP8

$456.78 View part →

Chevrolet S10 Transfer Case Motor Replacement

1992-2004 Chevrolet S10 Electronic Shift 2-Speed Transfer Case Motor (New OEM)

1999-2004 Chevrolet S10 Transfer Case Shift Motor (Used OEM)

1998-2001 Chevrolet S10 Transfer Case Motor (Dorman)

1992-2004 Chevrolet S10 Transfer Case Motor (Dorman)

1992-2004 Chevrolet S10 Transfer Case Motor (Cardone)

1998-2001 Chevrolet S10 Transfer Case Motor (Cardone)

1998-2001 Chevrolet S10 Transfer Case Motor (Cardone)

2000-2004 Chevrolet S10 Transfer Case Motor (Dorman)

1999-2004 Chevrolet S10 Transfer Case Motor (Cardone)

1998-2004 Chevrolet S10 Transfer Case Motor (Dorman)

2000-2004 Chevrolet S10 Transfer Case Motor (Dorman)

2000-2004 Chevrolet S10 Transfer Case Motor (Autopart International)

2000-2004 Chevrolet S10 Transfer Case Motor (Cardone)

What buyers are saying.

Racing Partner Videos

Transfer Case Motor Compatibility for Chevrolet S10

Available Trims

Body Types

Engine Options

Transmissions