Chevrolet S10 Wheel Bearing Replacement

Differential Bearing Retainer - Axle

8.50 " Ring Gear FAG Global Number FC67148.5 .830" Wide Brg.

Taper Bearing Set Includes Cup and Cone

with 0.843 in. Bearing Inside Diameter with 1.781 in. Outside Diameter Bearing(s) 0.610 in. Width

Replacement Bearing

GM Original Equipment; INCLUDES CUP AND CONE) (TIMKEN, LM12748F-LM12710, 21.440MM ID X 45.260MM OD X 15.484MM Thick

Replacement Bearing 8.5" Ring Gear Limited-Slip Wide Stance

w/ 2.078" ID x 2.532" OD x 0.803" Thickness

transfer case output shaft bearing

w/ 8.5" Ring Gear Wheel Bearing Axle Nut Torque Spec: N/R

with 8.5in Ring Gear

Replacement Bearing 8.5" Ring Gear Limited-Slip

without Limited Slip Differential with 8.5in Ring Gear ; Standard Replacement Bearing

Axle Repair Bearing 8.625" Ring Gear Exc. Limited- Slip Wide Stance

Standard Replacement Bearing

Rear Bearing Kit; Repair Bearing With Seal

Axle Repair Bearing 8.625" Ring Gear Limited Slip

8.5 Inch Ring Gear

Canadian Built Standard Design with 7.625 (in) Ring Gear with Axle Code K

Standard Design with 8.5 (in) Ring Gear with Wide Stance Package without Limited Slip Differential

w/ 2.078" ID x 2.532" OD x 0.803" Thickness

7.625" Ring Gear FAG Global Number FC67147

ZR2 Higher Wider Package

Rear Bearing Kit without Limited Slip Differential with 8.5in Ring Gear ; Repair Bearing With Seal

w/ 1.619" ID x 2.800" OD x 1.047" Thickness

with 1.6253 in. Bearing Inside Diameter with 2.8040 in. Outside Diameter Bearing(s) 2.8040 in. Width with 8.50 Ring Gear ; 1.024" Wide Brg.

w/ 1.619" ID x 2.800" OD x 1.047" Thickness

w/ 1.619" ID x 2.800" OD x 1.047" Thickness

with 8.5 (in) Ring Gear with Axle Repair Bearing Assembly with Wide Stance Package without Limited Slip Differential

with Axle Repair Bearing Assembly

Standard Design with 8.5 (in) Ring Gear with Limited Slip Differential

w/ 2.078" ID x 2.532" OD x 0.803" Thickness

8.50" Ring Gear w/o High Wider (ZR2) FAG Global Number F563826 1.024" Wide Brg. 1.024" Width

Limited Slip Differential - 8.5 in. Ring Gear

with 8.5 (in) Ring Gear with Axle Repair Bearing Assembly with Limited Slip Differential Not for tapered axle tube ID Models

w/ 1.619" ID x 2.800" OD x 1.047" Thickness

w/ 1.619" ID x 2.800" OD x 1.047" Thickness