Chevrolet Silverado Suspension Leveling Kit Replacement

2 in. Lift; Coil Spacer

Fits factory cast steel, aluminum, and stamped steel control arm equipped models. Will work on Denali Models.

Factory wheel/tire combo; Factory 20s with 1/4" wheel spacer with tire size provided in tire sizing chart for 20" wheels. Fitment: Fender Trim Plate Accessories will NOT fit 2007- 2013 model years. Fitment: Will NOT fit 2007 "Classic" models. If you have a 2007 Classic, see kits for comparable 1999-06 models. Fitment: Will NOT fit models equipped with MagneRide magnetic ride control. Fitment: Will not fit vehicles equipped with Auto-Ride.

Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

Fitment: This kit is not designed for dually models, but may be easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

Fitment: This kit is not designed for dually models, but may be easily adapted to accommodate your truck. Please contact customer support and they will help you find a solution. Shocks or Brackets Required: Factory shocks don't allow adequate suspension travel once lifted, shock extension brackets or aftermarket (longer) shocks are strongly recommended. To determine which kit # is required, verify which RPO codes are shown in the glovebox to determine the factory installed torsion keys. The following RPO codes require the C1202/C1212/C31 kits: FT2 - FT3 - FT4 - FT5 - FT6 - FT7, while RPO codes FK2 - FK3 - FF6 - FF7 - FF8 - FF9 require the C1203/C1213/C32 kits.

This kit has not been test fitted on Silverado ZR2 or Sierra AT4X models at this time. While it's not necessary on all vehicles, some tire/wheel combinations have tight clearance to the factory control arms. To resolve this Zone Offroad includes a pair of optional weld-on steering stop extensions that can be installed on the lower control arm to limit steering slightly. Stock Wheel and Tires will require 1/4" wheel spacers. (Tight to upper ball joint and arm when turning) 2022 Models: This system has not been tested on models equipped with Super Cruise. Tire and Wheel Fitment: 295/70R17 - Stock Wheel 295/65R18 - Stock Wheel 295/60R20 - Stock Wheel 285/60R20 5" Backspacing