Chevrolet Silverado 1500 Suspension Lift Kit Replacement

1" LIFT BLOCKS BUILT WITH ZERO DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

1.5" LIFT BLOCKS BUILT WITH 1.5 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6 in. Lift; Incl. U-Bolts; Hardware

For 4 in. Lift; Box 5; For PN[K1158B/K1159B/K1164B/K1164BP/K1164BPS/K1164BPX/K1171B/K1171BP/K1171BPS/K1171BPX/K1173B] w/ OE Steel Knuckle

For 6 in. Lift; Box 5 For PN[K1051B/K1051BP/K1056B/K1056BP/K1057B/K1057BP/K1078B/K1143B/K1143BMX/~K1143BP/K1143BPS/K1143BPX/K1144B/K1144BMX/K1144BP/K1144BPS/K1144BPX]

2" LIFT BLOCKS BUILT WITH 2 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Box 6 of 7 For PN[K1175B/K1175BP]

3" LIFT BLOCKS BUILT WITH 3 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Front Leveling Kit This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD/4WD

2 in. Front Leveling Kit With Front Coil Suspension Wheel Drive: 2WD

4" LIFT BLOCKS BUILT WITH 4 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

5" LIFT BLOCKS BUILT WITH 5 DEGREES OF ANGLE REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY REQUIRES LONGER U-BOLTS. U-BOLTS ARE AVAILABLE SEPARATELY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6 in. Lift

2-4 in. Lift; Rear Shock Extensions

3 in. Lift; Incl. 2 in. Flat Rear Blocks; U Bolts w/Nuts

6-7 in. Lift

6 in. Lift; Incl. 4.5 in. Rear Blocks; U-Bolts w/Nuts OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

4 in. Lift; Incl. Front Spacers; Hardware

6-7 in. Lift

4 in. Lift

2.5 in. Front Leveling Kit With Torsion Bar Suspension Wheel Drive: 4WD

1.5 in. Front Leveling Kit This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD/4WD

For 6 in. Lift; Box 5; For PN[K1141B/K1166B/K1166BMAG/K1166BMX/K1167B/K1167BMAG/K1167BMX]

With Superlift Shocks 2 in. Suspension Lift Kit

2" FRONT LIFT COILS FITS 2WD V6 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" FRONT LIFT COILS FITS 2WD V8 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Incl. Front Strut Spacers/Add-A-Leafs/Hardware Bag

2" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701345 TO MAKE A COMPLETE 4.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Lift

2 in. Front Lift; 2 in. Rear Lift; Incl. Front Spacers; Rear Add A Leafs

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Incl. Rear Blocks/U-Bolts

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Incl. Torsion Bar Keys/Rear Add-A-Leafs/Hardware Bag

2 in. Lift Incl. Rear Blocks/U-Bolts/Front Shock Relocation Brackets

3" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701550 TO MAKE A COMPLETE 5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 700930 TO MAKE A COMPLETE 3" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

1" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ EITHER PART# 701330BL OR PART# 701935 TO MAKE A COMPLETE LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Front Lift; 2 in. Rear Lift; Incl. Front Spacers; Rear Blocks

Eibach Pro-Truck Lift Kit for 14-17 Chevrolet Silverado 1500 (Must Be Used w/Pro-Truck Front Shocks)

Eibach Pro-Truck Lift Kit for 99-06 Chevrolet Silverado 1500 (Must Be Used w/Pro-Truck Front Shocks)

Eibach 07-13 Chevy Silverado 1500 (Excludes Hybrid 2WD) Pro-Lift Kit Springs (Front Springs Only)

Eibach Pro-Truck Lift Kit 19-20 Chevrolet Silverado 1500 5.3L V8 4WD (Front Springs Only)

Eibach Pro-Truck Lift Kit 19-20 Chevrolet Silverado 1500 5.3L V8 2WD (Front Springs Only)

2 in. Front Lift; 2 in. Rear Lift Incl. Front Strut Spacers/Rear Blocks/U-Bolts/Hardware Bag

K1158/K1159; Box 4 For Use w/Factory Steel Suspension

For 4 in. Lift; Box 4; For PN[K1141B/K1142B/K1143B/K1143BP/K1143BPS/K1143BPX/K1144B/K1144BP/K1144BPS/K1144BPX/K1152B/K1152BMX]

2 in. Level 1 Lift Kit Wheel Drive: 2WD/4WD

2 in. Lift

2 in. Lift; SX8000 Shocks For Use w/31 in. X 10.50 in. Tires~Hardware Bag~Incl. SX8000 Shocks/Shock Boots/Front Strut Spacers/Add-A-Leafs

6-7 in. Lift

3" REAR KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 700930 TO MAKE A COMPLETE 5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Nitro Shocks; 2 in. Lift

2 in. Lift; Black MAX Shocks

3" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ EITHER PART# 701330BL OR PART# 701935 TO MAKE A COMPLETE LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Front Shock Relocation Brackets~Incl. Rear Blocks/U-Bolts/Rear Add-A-Leafs

K1158B/K1159B/K1173B; Box 1

4" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701550 TO MAKE A COMPLETE 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2 in. Front Lift; 2 in. Rear Lift; Incl. Front Spacers; Rear Add A Leafs; Rear SX8000 Shocks

For 7 in. Lift; Box 1; For PN[K1078B]

Box 1 of 7 For PN[K1175B/K1175BP]

K1164B/K1165B; Box 1

For 7 in. Lift; Box 3; For PN[K1078B]

For 6 in. Lift; Box 2; For PN[K1141B/K1142B/K1143B/K1143BP/K1143BPS/K1143BPX/K1144B/K1144BP/K1144BPS/K1144BPX/K1152B/K1152BMX]

Box 2; For PN[K1167B/K1167BMAG/K1167BMX/K1171B/K1171BP/K1171BPS/K1171BPX]

Box 2; For PN[K1164B/K1164BP/K1164BPS/K1164BPX/K1166B/K1166BMAG/K1166BMX] w/ OE Steel Knuckle

2 - 3.5 in. Lift; Upper; Pair; w/HD Ball Joints And Bushings Does Not Fit AWD Models~Does Not fit Models w/Autoride Or Magnetic Ride Control~Models W/Mass Damper Will Require Removal Of Mass Damper~Fits Models w/OEM Cast Steel Upper A-arms~Does Not Fit 2007 Classic Models [2006 Body Style]

2 - 3.5 in. Lift; Upper; Pair; w/HD Ball Joints And Bushings Does Not Fit Models w/Adaptive Ride Control

2 - 3.5 in. Lift; Upper; Pair; w/HD Ball Joints And Bushings Does Not Fit AWD Models~Does Not fit Models w/Autoride Or Magnetic Ride Control~Models W/Mass Damper Will Require Removal Of Mass Damper~Fits Models w/OEM Aluminum Or Stamp Steel Upper A-arms

Use of Automatic 4 Hi Feature Not Recommended After Installation Must Be Used with RS66311R9-1, RS66311R9-2 Box 3 of 3 without Rear Composite Mono-Leaf Springs

2.5 in. Level 1 Lift Kit Wheel Drive: 4WD

3 in. Lift; Incl. Front Struts; Strut Bump Stops

6 in. Lift; Incl. Strut; Strut Bump Stop; Locknut; Washer OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

2 in. Front Lift; 2 in. Rear Lift; Incl. Front Spacers; Rear Blocks; Rear SX8000 Shocks For Use w/31 in. X 10.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Front Strut Spacers~U-Bolts/Rear Blocks/Hardware Bag

5" REAR LIFT KIT THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701345 TO MAKE A COMPLETE 7.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Use of Automatic 4 Hi Feature Not Recommended After Installation Must Be Used with RS66311R9-2, RS66311R9-3 Box 1 of 3

2 in. Front Lift; 2 in. Rear Lift; Incl. Front Spacers; Rear Blocks; Rear SX8000 Shocks

7"/5" LIFT HEIGHT THIS IS BOX 1 OF 3. OTHER COMPONENT BOXES ARE REQUIRED TO MAKE UP A COMPLETE 7" LIFT KIT FITS MODELS W/ STAMPED STEEL OR ALUMINUM CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5 in. Lift; For PN [K1126DL/K1127DL]

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Front Torsion Bar Keys~Rear Add-A-Leafs/Hardware Bag

7"/5" LIFT HEIGHT THIS IS BOX 1 OF 3. OTHER COMPONENT BOXES ARE REQUIRED TO MAKE UP A COMPLETE 7" LIFT KIT FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7"/5" LIFT HEIGHT THIS IS BOX 2 OF 3. OTHER COMPONENT BOXES ARE REQUIRED TO MAKE UP A COMPLETE 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Use of Automatic 4 Hi Feature Not Recommended After Installation Must Be Used with RS66311R9-1, RS66311R9-3 Box 2 of 3

2 in. Lift For Use w/31 in. X 10.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Rear Blocks/U-Bolts

6 in. Lift; Incl. Knuckles; Torsion Bar Brackets; Hardware; No Skid Plate

4" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701550 & 871325F TO MAKE A COMPLETE 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701345 TO MAKE A COMPLETE 4.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7"/5" LIFT HEIGHT THIS IS BOX 3 OF 3. OTHER COMPONENT BOXES ARE REQUIRED TO MAKE UP A COMPLETE 7" LIFT KIT FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Front Lift; 2 in. Rear Lift Factory Rims Will Not Fit/A Rim w/5.5 in. Or Less BS Required~For Models w/One Piece OE Cast Steel Upper Control Arm~For Use w/33 in. X 12.50 in. Tires~Incl. Upper Control Arm Kit/Rear Blocks/U-Bolts~Requires New Rims With 4.5 in. Backspacing Or Less

3" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701550 TO MAKE A COMPLETE 5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701330BL & 871325F TO MAKE A COMPLETE 5.5" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Box 2 of 2; For 4 in. Lift; For PN[K1120DL/K1119M/K1119DL/K1119]

Box 2 of 2; For 4 in. Lift; For PN[K1116DL/K1116M/K1117DL/K1116]

Box 1 of 2; For 4 in. Lift; For PN[K1120DL/K1119M/K1116DL/K1116M/K1119DL/K1119/K1117DL/K1116]

3" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 5/8" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED WILL FIT 2007 CLASSIC MODEL MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7"/5" LIFT HEIGHT THIS IS BOX 3 OF 3. OTHER COMPONENT BOXES ARE REQUIRED TO MAKE UP A COMPLETE 7" LIFT KIT FITS MODELS W/ STAMPED STEEL OR ALUMINUM CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

1" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ EITHER PART# 701330BL OR PART# 701935 TO MAKE A COMPLETE LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

5" REAR LIFT KIT W/ FOX SHOCKS THIS BOX IS DESIGNED TO BE USED IN CONJUNCTION W/ PART# 701345 & 871325F TO MAKE A COMPLETE 7" LIFT KIT MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

4 in. Front Lift; 2 in. Rear Lift: Incl. Upper Control Arms; Rear Blocks And U Bolts Requires New Rims With 4.5 in. Backspacing Or Less

3.5 in. Upper Control Arm Kit With Factory Steel Steering Knuckles With Superlift Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

3.5 in. Upper Control Arm Kit With Factory Aluminum Steering Knuckles With Superlift Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

3 in. Lift; w/Upper Control Arms Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

3.5 in. Lift; w/Upper Control Arms; For PN[C19350]

3.5 in. Lift; w/Upper Control Arms; For PN[C7350]

Box 2 of 2; For PN]K1132/K1132M/K1133DL/K1134DL] For Models w/o Magnetic Ride Control

3.5 In. Lift; Incl. Performance Shocks

4 in. Front/2 in. Rear Lift; SX8000 Shocks Factory Rims Will Not Fit/A Rim w/5.5 in. Or Less BS Required~For Models w/One Piece OE Cast Steel Upper Control Arm~For Use w/33 in. X 12.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Upper Control Arm Kit~Rear Blocks/U-Bolts ~Requires New Rims With 4.5 in. Backspacing Or Less

Box 1 of 2; For PN]K1132/K1132M/K1133DL/K1134DL] For Models w/o Magnetic Ride Control

Black; Box 2 of 2; For 6 in. Lift; For PN[K1027/K1027M/K1028DL/K1029DL]

1.5 in. Lift; w/Rear Performance Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

4 in. Front Lift; 2 in. Rear Lift: Incl. Upper Control Arms; Rear Blocks And U Bolts; w/SX8000 Shock Absorbers Requires New Rims With 4.5 in. Backspacing Or Less

With Superlift Shocks 3 in. Suspension Lift Kit Does not fit GM 1500 AT4 or Trailboss Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 2WD Wheel Drive: 4WD

3.5 in. Lift; w/Front Upper Control Arms; w/Rear Shock Extensions

3.5 in. Lift; w/Front Upper Control Arms; Rear Lift Blocks; w/Rear Shock Extensions

4 in. Front Lift; 2 in. Rear Lift: Incl. Upper Control Arms; Rear Blocks And U Bolts; w/SX8000 Shock Absorbers Requires New Rims With 4.5 in. Backspacing Or Less

For 4 in. Lift; For PN[K1070]

w/Performance Shocks; 4 in. Lift; Incl. Upper Control Arms/Ball Joint; Diff. Mounts; Skid Plate; Blocks/U-Bolts; Rear Shocks; All Req. Hardware Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

w/Performance Shocks; 4 in. Lift Rear Shocks/All Required Hardware~Incl. Coil Spacer/Upper Control Arms/Differential Mounts/Skid Plate~Upper Ball Joint/Bushing Kit/1.5 in. Block/U-Bolt

For 4 in. Lift; Incl. Performance Shocks; For PN[K1059]

4 in. Lift; w/Factory Magneride Suspension

4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5 in. Lift; w/Upper Control Arms; For PN[C17350A]

3.5 in. Upper Control Arm Kit With Factory Aluminum and Stamp Steel Control Arms With Superlift Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

3.5 in. Upper Control Arm Kit With Factory Steel Steering Knuckles With Superlift Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

Box 1 of 2; For Gen ll 6 in. Lift; For PN[K1111DL/K1083DL/K1083M/K1084/K1084M/K1100/K1113DL/K1094/K1084DL/K1083DL/K1086DL/K1085DL/K1125]

3.5 In. Lift; Incl. 2.25 ARC Shocks

3" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING STOCK 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5 in.; w/Front Strut Spacers; Front Upper A-Arms; 2 in. Rear Lift Blocks; U-bolts And Rear Hydro 7000 Shocks Does Not Fit Models w/Adaptive Ride Control

3.5 in. Lift; w/Hydro 7000 Shocks Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

4 in. Lift; For Vehicles w/ Magneride And Steel Suspension

4 in. Lift; Uni-Ball Style Requires New Rims With 4.5 in. Backspacing Or Less

Box 2 of 2; For Gen ll 6 in. Lift; Steel; For PN[K1111DL/K1083/K1083M/K1100/K1083DL/K1085DL]

4 in. Front Lift; 2 in. Rear Lift Differential Drops/Differential Skid Plate/Extended U-Bolts~Incl. Upper Control Arm Kit/Rear Blocks/Coil Strut Spacers~Rear Shock Relocation Bracket~Requires New Rims With 4.5 in. Backspacing Or Less

Black; Box 1 of 2; For 6 in. Lift; For PN[K1027/K1027M/K1028DL/K1029DL]

3.5 In. Lift; Incl. Stealth Shocks

3.5 in. Lift; w/Nitro 8000 Shocks Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

3.5 in.; w/Front Strut Spacers; Front Upper A-Arms; 2 in. Rear Lift Blocks; U-bolts And Rear Nitro 8000 Shocks Does Not Fit Models w/Adaptive Ride Control

4 in. Front/2 in. Rear Lift; Incl. Upper Control Arm Kit; w/Rear Blocks And U Bolts Requires New Rims With 4.5 in. Backspacing Or Less~Will Not Fit w/Magnetic Ride Control

1.5 in. Lift; w/Rear Stealth Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

Eibach 14-18 GMC Sierra 1500 / Chevy Silverado 1500 Pro-Truck Lift Kit

Eibach Pro-Truck Lift Kit (Stage 1) for 07-13 Chevrolet Silverado 1500 (Excl Hybrid 2WD)

Eibach 99-06 Chevy Silverado1500 Pro-Truck Lift Kit

3.5 in.; w/Front Strut Spacers; Front Upper A-Arms; 2 in. Rear Lift Blocks; U-bolts And Rear Black MAX Shocks Does Not Fit Models w/Adaptive Ride Control

3.5 in. Upper Control Arm Kit With Factory Steel Steering Knuckles With Bilstein Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

3.5 in. Upper Control Arm Kit With Factory Aluminum Steering Knuckles With Bilstein Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

With Bilstein Front Struts and Rear Shocks 2.5 in. Suspension Lift Kit

4 in. Lift; w/Upper Control Arm; Incl. Bracket And Hardware

Eibach Pro-Truck Lift Kit for 19-20 Chevy Silverado 1500 5.3L V8 2WD

Eibach 19-20 Chevy Silverado 1500 5.3L V8 4WD Pro-Truck Lift Kit

4 in. Front Lift; 2 in. Rear Lift Differential Drops/Differential Skid Plate/Extended U-Bolts~For Models w/One Piece OE Cast Steel Upper Control Arm~Incl. Upper Control Arm Kit/Rear Blocks/Coil Strut Spacers~Rear Shock Relocation Bracket~Requires New Rims With 4.5 in. Backspacing Or Less

5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ STAMPED STEEL CONTROL ARMS ONLY MAGNERIDE MODELS WILL REQUIRE PART #'S 541500 & 8317MR (REAR SHOCKS CANNOT BE USED) MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5" LIFT KIT REQUIRES 18" RIMS OR LARGER W/ 5 1/2" BACKSPACING OR LESS STOCK 20" RIMS WILL FIT W/ STOCK SIZE TIRES CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT TRAIL BOSS OR AT4 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

With Bilstein Shocks 3 in. Suspension Lift Kit Does not fit GM 1500 AT4 or Trailboss Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 2WD Wheel Drive: 4WD

Black; Box 2 of 2; For 6 in. Lift; For PN[K1024/K1115DL/K1024M/K1026DL/K1025DL]

6" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 34" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Lift; UniBall Style; w/SX8000 Shocks For Models w/One Piece OE Cast Steel Upper Control Arm~Requires New Rims With 4.5 in. Backspacing Or Less

Box 2 of 2; For 6 in. Lift; Steel; For PN[K1067/K1099/K1112DL/K1067M/K1067DL/K1072DL]

3.5 in. Lift; w/Black Max Shocks Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

3.5 in.; w/Front Strut Spacers; Front Upper A-Arms; 2 in. Rear Lift Blocks; U-bolts And Rear M95 Monotube Shocks Does Not Fit Models w/Adaptive Ride Control

For 4 in. LiftIncl. Stealth Monotube Shocks; For PN[K1059M]

w/Stealth Monotube Shocks; 4 in. Lift; Incl. Upper Control Arms/Ball Joint; Diff. Mounts; Skid Plate; Blocks/U-Bolts; Rear Shocks; All Req. Hardware Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

w/Stealth Monotube Shocks; 4 in. Lift Rear Shocks/All Required Hardware~Incl. Coil Spacer/Upper Control Arms/Differential Mounts/Skid Plate~Upper Ball Joint/Bushing Kit/1.5 in. Block/U-Bolt

For 4 in. Lift; Incl. Rear Stealth Monotube Shocks; For PN[K1070M] Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

C1: Does not fit AT4 or Adaptive Air ride Suspension C2: Trail Boss models will lift 2" less than advertised Lowering Rate: F: 6.0-8.0"

Box 1 of 2; For 6 in. Lift; For PN[K1093/K1067/K1099/K1068/K1068M/K1114DL/K1112DL/K1078/K1067M/K1067DL/K1073DL/K1068DL/K1072DL]

3.5 in. Lift; For PN [K1129DL/K1130DL]

4 in. Lift; UniBall Style; w/SX8000 Shocks Requires New Rims With 4.5 in. Backspacing Or Less

3.5 in. Upper Control Arm Kit With Factory Aluminum and Stamp Steel Control Arms With Bilstein Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

3.5 in. Upper Control Arm Kit With Factory Steel Steering Knuckles With Bilstein Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

Box 2 of 2; For 6 in. Lift; For PN[K1093/K1068/K1068M/K1114DL/K1073DL/K1068DL]

5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 5/8" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED WILL FIT 2007 CLASSIC MODEL FITS 2WD V8 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 5/8" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED WILL FIT 2007 CLASSIC MODEL FITS 2WD V6 MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Lift; w/Upper Control Arm; Incl. SX8000 Shocks

6.5" LIFT KIT REQUIRES 18" RIMS OR LARGER W/ 5 1/2" BACKSPACING OR LESS STOCK 20" RIMS WILL FIT W/ STOCK SIZE TIRES CLEARS UP TO A 37" x 12.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT TRAIL BOSS OR AT4 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

; Black; Box 2 of 2; For 6 in. Lift; For PN[K1001M/K1001/K1001DL 6 in. Lift Use 315/75R16 Tire w/16x10 Wheel w/4.625 BS w/Minor Trimming~ 6 in. Lift Use 315/70R17 Tire w/17x9 Wheel w/4.625 in. BS w/Minor Trimming~ 6 in. Lift Use 325/65R18 Tire w/18x9 Wheel w/5 in. BS w/Minor Trimming~ Will Not Fit Vehicles With Auto Ride Shocks

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ STAMPED STEEL CONTROL ARMS ONLY MAGNERIDE MODELS WILL REQUIRE PART #'S 541500 & 8317MR (REAR SHOCKS CANNOT BE USED) MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5 in. Lift; w/M95 Monotube Shocks Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

Black; Box 1 of 2; For 6 in. Lift; For PN[K1024/K1018/K1019/K1115DL/K1024M/K1021DL/K1026DL/K1025DL]

Use of Automatic 4 Hi Feature Not Recommended After Installation Must reuse OE Springs and Upper Mounting Components Includes RS9000XL Series Shocks Raises Front 3.0 (in) Raises Rear 1.5 (in) Includes RS9000XL Series Struts without Rear Composite Mono-Leaf Springs

4 in. Front/2 in. Rear Lift; SX8000 Shocks Incl. SX8000 Shocks/Shock Boots/Steel Factory Upper Control Arms~Rear Blocks/U-Bolts/Hardware Bag~Requires New Rims With 4.5 in. Backspacing Or Less

; Black; Box 2 of 2; For 6 in. Lift; For PN[K1000/K1000DL/K1000M]

7.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

w/Performance Shocks; 4 in. Lift; Incl. UCA w/Ball Joint; Diff. Mounts; Skid Plate; Blocks/U-Bolts; Rear Shocks; All Req. Hardware Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

w/Rear Performance Shock; 4 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block/U-Bolts

For 4 in. Lift; Incl. Rear Performance Shocks

For 4 in. Lift; Incl. Performance Shocks; For PN[K1062]

4 in. Lift; Uni-Ball Style For Models w/Factory Aluminum Upper Control Arms~Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Lift; Uni-Ball Style For Models w/One Piece OE Cast Steel Upper Control Arm~Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block/U-Bolts; For Use w/Magneride Suspension

4 in. Lift; Uni-Ball Style For Models w/One Piece OE Cast Steel Upper Control Arm~Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Lift; Uni-Ball Style For Models w/Factory Aluminum Upper Control Arms~Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Lift; UniBall Style; w/SX8000 Shocks For Models w/One Piece OE Cast Steel Upper Control Arm~Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Lift; For Use w/OEM Aluminum Steering Knuckles And Control Arms

4 in. Lift; Box 1; For Models Equipped w/OEM Steel Steering Knuckles/Control Arms

4 in. Lift; For Vehicles w/Magneride And Steel Suspension

For 4 in. Lift; Incl. Rear Stealth Monotube Shocks; For PN[K1062M]

w/Stealth Monotube Shocks; 4 in. Lift; Incl. UCA w/Ball Joint; Diff. Mounts; Skid Plate; Blocks/U-Bolts; Rear Shocks; All Req. Hardware Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

For 4 in. Lift; Incl. Rear Stealth Monotube Shocks; For PN[K1071M] Will Not Fit AWD Models~Can Not Use OEM Wheel And Tire~Before Ordering Visually Check Veh Factory Susp For Aluminum Or Steel Vers~Use 33/12.50R17 Tire w/17X8 Wheels w/4.5 in. BS; Minor Trim~Use 275/65R18 Tire w/18X8 Wheels w/4.5 in. BS; Minor Trim~Use 295/55R20 Tire w/20X9 Wheels w/5 in. BS; Minor Trim~Will Not Fit Vehicles With Auto Ride Shocks

w/Stealth Monotube Shocks; 4 in. Lift; Incl. Uniball Upper Control Arms; Differential Drop Brackets; Differential Skid Plate; Block/U-Bolts

4 in. Front/2 in. Rear Lift Differential Skid Plate/Extended U-Bolts~Factory Rims Will Not Fit/A Rim w/5.5 in. Or Less BS Required~For Use w/33 in. X 12.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Upper Control Arms~Rear Blocks/Coil Strut Spacers/Differential Drops~Rear Shock Relocation Bracket/Hardware Bag~Requires New Rims With 4.5 in. Backspacing Or Less

3.5 In. Lift; Rear; Incl. Performance Shocks Can Not Use OEM Wheel And Tire~Does Not Fit Standard Cab Models~Not For Models Equipped w/Adaptive Ride Control

3.5 In. Lift; w/ARC Spring Spacer Kit Can Not Use OEM Wheel And Tire~Does Not Fit Standard Cab Models

Use of Automatic 4 Hi Feature Not Recommended After Installation Must reuse OE Springs and Upper Mounting Components Includes RS9000XL Series Shocks Raises Front 3.0 (in) Raises Rear 1.5 (in) Includes RS9000XL Series Struts without Rear Composite Mono-Leaf Springs

3" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING STOCK 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 32" x 11.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3 in. Lift

3-3.5 in. Lift; Incl. Knuckles; Front/Rear Cross Members; CV Axle Spacers; Sway Bar End Links; Hardware

4 in. Lift; UniBall Style; w/SX8000 Shocks Requires New Rims With 4.5 in. Backspacing Or Less

4 in. Front Lift; 3 in. Rear Lift Differential Relocation Bracket/Shock Relocation Bracket/Knuckles~For Use w/33 in. X 12.50 in. Tires~Incl. Sub Frame/Rear Add-A-Leaf/Front Axle Spacers/U-Bolts~Not For Use w/Air Ride Shocks~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Drop Brackets/Blocks/Bushing Bag~Will Not Fit With Stabilitrak

4 in. Lift; UniBall Style; w/SX8000 Shocks Requires New Rims With 4.5 in. Backspacing Or Less

3.5 in. Lift; w/ADX 2.0 Remote Reservoir Shocks

3.5 in. Lift; w/ADX 2.0 Remote Reservoir Shocks

3.5 in. Lift; w/ADX 2.0 Remote Reservoir Shocks

3.5 in. Lift; w/ADX 2.0 Remote Reservoir Shocks Fits Models w/Rear Mono-Leaf Spring Only~Does Not Fit Models w/Adaptative Ride Control~Does Not Fit RWD Models w/16 in. Wheels

4.5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING FACTORY 20" RIMS OR LARGER WILL FIT CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Can Not Use OEM Wheel And Tire~Does Not Fit Standard Cab Models~Not For Models Equipped w/Adaptive Ride Control

5" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4 3/4" BACKSPACING OR LESS 20" RIMS OR LARGER CAN GO UP TO 5 3/4" BACKSPACING CLEARS UP TO A 33" x 11.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS MODELS W/ STAMPED STEEL CONTROL ARMS ONLY MAGNERIDE MODELS WILL REQUIRE PART #'S 541500 & 8317MR (REAR SHOCKS CANNOT BE USED) MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

4 in. Front Lift; 3 in. Rear Lift Axle Spacers/Hardware Bag~Front Shock Relocation Bracket/Rear Blocks/Differential Sleeve~Incl. Crossmembers/Differential Relocation Brackets/Knuckles~Requires New Rims With 4.5 in. Backspacing Or Less~Skid Plate/Rear Add-A-Leaf Kit/Torsion Bar Crossmember Bracket

3.5 in. Lift; Aluminum; For PN [K1144DL/K1145DL/K1146DL/K1147DL]

3.5" LIFT KIT REQUIRES 18" RIMS OR LARGER W/ 5 1/2" BACKSPACING OR LESS STOCK 20" RIMS WILL FIT W/ STOCK SIZE TIRES CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9 WIDE RIM FENDER TRIMMING MAY BE REQUIRED DOES NOT FIT TRAIL BOSS OR AT4 MODELS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Up to 35x12.50 (in) Tire with Minor Fender Trimming Raises Front 2.375 (in) - 3.75 (in) with 2 (in) Maximum Lift Rear ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.75” Backspace / 0mm Offset

4 in. Lift; For Use w/Models w/Aluminum Steering Knuckles/Control Arms

3 in. Lift; Incl. Steering Stabilizer; Block And U Bolt Kit OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~If Rr Add-A-Leaf Preferred For Rr Lift Order PN[R1115] Not PN[BUK2063]

4 in. Lift; For Use w/Models w/Steel Steering Knuckles/Control Arms

4 in. Lift; CV Axle Spacers; Front Crossmember; Necessary Installation Hardware; Rear Block Kit; Rear Crossmember 33 X 12.50 w/17 in. - 18 X 8 - 9 in.; Back Spacing 4.5 in. - OEM~33 X 12.50 w/20 in. X 8 - 9; Back Spacing 4.5 in. - 5.75 in.

4 in. Lift 4 in. Skid Plate/Add-A-Leaf Kit/Torsion Bar Crossmember Bracket~Air Ride Shocks~For Use w/33 in. X 12.50 in. Tires~For Use w/Air Ride Shocks~Incl. Crossmembers/Differential Relocation Brackets/Knuckles~Requires New Rims With 4.5 in. Backspacing Or Less~Shock Relocation Brackets/Axle Spacers/Differential Sleeve

6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms With Superlift Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

4 in. Front Lift; 3 in. Rear Lift Axle Spacers/Hardware Bag~For Use w/33 in. X 12.50 in. Tires~Front Shock Relocation Bracket/Rear Blocks/Differential Sleeve~Incl. Crossmembers/Differential Relocation Brackets/Knuckles~Not For Use w/Air Ride Shocks~Requires New Rims With 4.5 in. Backspacing Or Less~Skid Plate/Rear Add-A-Leaf Kit/Torsion Bar Crossmember Bracket~Will Not Fit With Stabilitrak

Knuckle Style Kit 6 in. Suspension Lift Kit With Superlift Shocks Wheel Drive: 4WD

6-7 in. Lift

6-7 in. Lift; For Use w/Models w/Steel Steering Knuckles/Control Arms

6.5 in. Suspension Lift Kit With Superlift Shocks With Cast Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

4 in. Lift; Incl. Knuckles; Crossmembers; Blocks/UBolt; Wheel Spacers; For Use w/Steel Suspension

4 in. Lift; Incl. Front Strut Spacers; Blocks; U Bolts; For Use w/Steel Knuckles

Nitro Shocks; 4 in. Lift; Incl. Knuckles; Crossmembers; Blocks/UBolt; Wheel Spacers; For Use w/Steel Suspension

4 in. Lift; Incl. Knuckles; Crossmembers; Blocks/UBolt; Wheel Spacers; For Use w/Steel Suspension; Black MAX Shocks

4 in. Lift; Incl. Knuckles; Crossmembers; Front Spacer; Block; UBolt

Nitro Shocks; 4 in. Lift; Incl. Front Strut Spacers; Blocks; U Bolts; For Use w/Steel Knuckles

4 in. Lift; Incl. Front Strut Spacers; Blocks; U Bolts; For Use w/Steel Knuckles; Black MAX Shocks

6 in. Lift OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

Nitro Shocks; 4 in. Lift; Incl. Knuckles; Crossmembers; Front Spacer; Block; UBolt

4 in. Front/3 in. Rear Lift For Use w/33 in. X 12.50 in. Tires~Front Shock Relocation Bracket/Knuckles/Axle Spacers~Incl. SX8000 Shocks/Shock Boots/Crossmembers/Skid Plate~Rear Add-A-Leaf Kit/Differential Relocation Bracket/Rear Blocks~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Crossmember Relocation Bracket/Hardware Bag

With Bilstein Shocks 6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

6 in. Lift Differential Sleeve/Hardware Bag~For Use w/35 in. X 11.50 in. Tires~Incl. Crossmembers/Differential Relocation Brackets/Knuckles~Lateral Compression Arms And Mounts/Axle Spacers/Blocks~Requires New Rims With 4.5 in. Backspacing Or Less~Skid Plate/Add-A-Leaf Kit/Torsion Bar Crossmember Bracket/U-Bolts

4 in. Lift; Incl. Knuckles; Crossmembers; Blocks/UBolt; Wheel Spacers; For Use w/Steel Suspension; M95 Performance Shocks

3 in. Lift; Incl. Steering Knuckles; Front Crossmember; Block; U Bolt Kit OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~If Rr Add-A-Leaf Preferred For Rr Lift Order PN[R1115] Not PN[BUK2063]

4 in. Lift; Incl. Front Strut Spacers; Blocks; U Bolts; For Use w/Steel Knuckles; M95 Performance Shocks

4 in. Lift; Incl. Knuckles; Crossmembers; Front Spacer; Block; UBolt; M95 Performance Shocks

With Bilstein Shocks 6.5 in. Suspension Lift Kit With Cast Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

Nitro Shocks; 3 in. Lift; Incl. Steering Knuckles; Front Crossmember; Block; U Bolt Kit OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~If Rr Add-A-Leaf Preferred For Rr Lift Order PN[R1115] Not PN[BUK2063]

3 in. Lift; Incl. Steering Knuckles; Front Crossmember; Block; U Bolt Kit; Black MAX Shocks OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~If Rr Add-A-Leaf Preferred For Rr Lift Order PN[R1115] Not PN[BUK2063]

6 in. Front/5 in. Rear Lift Differential Drop/U-Bolts/Axle Spacers/Blocks~For Use w/35 in. X 12.50 in. Tires~Incl. Sub Frame/Lateral Compression Arms And Mounts/Add-A-Leaf~Not For Use w/Air Ride Shocks~Requires New Rims With 4.5 in. Backspacing Or Less~Shock Relocation Bracket/Torsion Bar Drop Bracket/Knuckles

6 in. Lift Front And Rear Shock Relocation Brackets/Torsion Bar Drop Bracket~Incl. Sub Frame/Lateral Compression Arms And Mounts/Add-A-Leaf~Requires New Rims With 4.5 in. Backspacing Or Less~U-Bolts/Axle Spacers/4 in. Blocks/Knuckles/Air Ride Shocks~Will Not Fit With Stabilitrak

4 in. Front/3 in. Rear Lift For Use w/33 in. X 12.50 in. Tires~Front Shock Relocation Bracket/Knuckles/Axle Spacers~Incl. SX8000 Shocks/Shock Boots/Crossmembers/Skid Plate~Not For Use w/Air Ride Shocks~Rear Add-A-Leaf Kit/Differential Relocation Bracket/Rear Blocks~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Crossmember Relocation Bracket/Hardware Bag

With Superlift Shocks 8 in. Suspension Lift Kit With Cast Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

With Superlift Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

6.5 in. Suspension Lift Kit With Cast Steel A-Arms With Superlift Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms With Superlift Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

With Superlift Rear Shocks 6 in. Suspension Lift Kit With Front Strut Spacer This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6-7 in. Lift; For Use w/Models w/Aluminum Steering Knuckles/Control Arms

6-7 in. Lift; Incl. Front Upper/Lower Strut Spacers; Front/Rear Crossmembrs; For Use w/Models w/Steel Steering Knuckles/Control Arms

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4.5" BACKSPACING OR LESS 18" RIMS OR LARGER WILL WORK WITH 5" BACKSPACING OR LESS STOCK RIMS WILL NOT FIT CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS STAMPED STEEL OR ALUMINUM CONTROL ARMS ONLY. PLEASE DOUBLE CHECK YOUR CONTROL ARMS BEFORE ORDERING MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

3.5-4 in. Lift; Incl. Front Struts And Rear Blocks OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

4 in. Lift; w/Rear Performance Shocks

4 in. Lift; w/Rear Performance Shocks

4 in. Front/3 in. Rear Lift For Use w/33 in. X 12.50 in. Tires~Front Axle Spacers/Shock Relocation Bracket/Knuckles~Incl. SX8000 Shocks/Shock Boots/Lower Sub Frame/Blocks/U-Bolts~Rear Add-A-Leaf/Differntial Relocation Bracket/Bushing Bag~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Drop Brackets

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4.5" BACKSPACING OR LESS 18" RIMS OR LARGER WILL WORK WITH 5" BACKSPACING OR LESS STOCK RIMS WILL NOT FIT CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

7" LIFT KIT REQUIRES 17" RIMS OR LARGER W/ 4.5" BACKSPACING OR LESS 18" RIMS OR LARGER WILL WORK WITH 5" BACKSPACING OR LESS STOCK RIMS WILL NOT FIT CLEARS UP TO A 35" x 12.50" TIRE ON 8"-9" WIDE RIM FENDER TRIMMING MAY BE REQUIRED FITS CAST STEEL CONTROL ARMS ONLY. PLEASE DOUBLE CHECK YOUR CONTROL ARMS BEFORE ORDERING MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

6 in. Lift; Incl. Front Struts; Rear Blocks OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~Maximum Tire/Wheel Back Spacing 315/75R17 4.5 in.

6 in. Lift; Incl. Rear Block And Add-A-Leafs; No Skid Plate

3 in. Lift; Incl. Steering Knuckles; Front Crossmember; Block; U Bolt Kit; M95 Performance Shocks OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing~If Rr Add-A-Leaf Preferred For Rr Lift Order PN[R1115] Not PN[BUK2063]

4 in. Suspension Lift Kit With Superlift Shocks Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 4WD

6 in. Suspension Lift Kit With Superlift Shocks Does not fit GM 1500 AT4 or Trailboss Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 4WD

Knuckle Style Kit 6 in. Suspension Lift Kit With Bilstein Shocks Wheel Drive: 4WD

6 in. Lift Differential Relocation Bracket/Hardware Bag~Differential Sleeve/U-Bolts~For Use w/35 in. X 11.50 in. Tires~Incl SX8000 Shocks/Shock Boots/Crossmembers/Skid Plate/Knuckles~Lateral Compression Arms/Mounts/Axle Spacers/Add-A-Leaf Kit~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Crossmember Relocation Bracket

6-7 in. Lift; Incl. Front Spacers; Blocks; U Bolts; For Use w/Aluminum Knuckles

6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Block/UBolt; For Use w/Steel Knuckles

With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Upper Control Arms With Steel Upper Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

With Bilstein Shocks 8 in. Suspension Lift Kit With Cast Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

4 in. Lift; w/Rear Stealth Shocks

4 in. Lift; w/Rear 46mm Piston Stealth Shocks

3.5-4 in. Lift; Incl. Front Struts And Rear Blocks

With Bilstein Shocks 6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

Nitro Shocks; 6-7 in. Lift; Incl. Front Spacers; Blocks; U Bolts; For Use w/Aluminum Knuckles

Nitro Shocks; 6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Block/UBolt; For Use w/Steel Knuckles

6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Block/UBolt; For Use w/Steel Knuckles; Black MAX Shocks

6-7 in. Lift; Incl. Front Spacers; Blocks; U Bolts; For Use w/Aluminum Knuckles; Black MAX Shocks

6 in. Lift; w/Rear Performance Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

Nitro Shocks; 3.5-4 in. Lift; Incl. Front Struts And Rear Blocks

3.5-4 in. Lift; Incl. Front Struts And Rear Blocks; Black MAX Shocks

With Bilstein Rear Shocks 6 in. Suspension Lift Kit With Front Strut Spacer This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

With Bilstein Shocks 6.5 in. Suspension Lift Kit With Cast Steel A-Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6 in. Front/5 in. Rear Lift Differential Drop~For Use w/35 in. X 12.50 in. Tires~Incl. SX8000 Shocks/Shock Boots/Sub Frame/U-Bolts/Blocks~Lateral Compression Arms/Mounts/Axle Spacers/Add-A-Leaf~Not For Use w/Air Ride Shocks~Requires New Rims With 4.5 in. Backspacing Or Less~Shock Relocation Bracket/Torsion Bar Drop Bracket/Knuckles

4 in. Front Lift; 3 in. Rear Lift Differential Relocation Bracket/Shock Relocation Bracket/Knuckles~Incl. Lower Sub Frame/Rear Add-A-Leaf/Front Axle Spacers/U-Bolts~Requires New Rims With 4.5 in. Backspacing Or Less~Torsion Bar Drop Brackets/Blocks/Bushing Bag

6 in. Lift; Incl. Front Knuckles; Crossmembers; Rear Add-A-Leaf; Hydro Shocks

6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms With Fox 2.0 Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Block/UBolt; For Use w/Steel Knuckles; M95 Performance Shocks

6-7 in. Lift; Incl. Front Spacers; Blocks; U Bolts; For Use w/Aluminum Knuckles; M95 Performance Shocks

6 in. Lift; Incl. Front Knuckles; Crossmembers; Rear Add-A-Leaf; Nitro Shocks

6 in. Lift; Incl. Front Knuckles; Crossmembers; Rear Add-A-Leaf; Black Max Shocks

6 in. Lift; Generation 2; For Vehicles w/Magneride And Steel Suspension

6 in. Lift; GEN II w/Magneride Suspension

3.5-4 in. Lift; Incl. Front Struts And Rear Blocks; M95 Performance Shocks

6 In. Lift; w/Rear Stealth Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

6 in. Suspension Lift Kit With Bilstein Shocks Does not fit GM 1500 AT4 or Trailboss Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 4WD

4 in. Suspension Lift Kit With Bilstein Shocks Due to difference in manufacturing and dimensions in the Silverado and Sierra, it is highly recommended that all tire and wheel combinations should be test fitted prior to installation. Does NOT fit vehicles equipped with round bend rear u-bolts Wheel Drive: 4WD

w/Performance Shocks; 6 in. Lift; GEN ll; w/Factory Aluminum Suspension Incl. Relocation Brackets/Crossmembers/Skid Plate/Spindles~Coilover Spacers/Blocks And U-Bolts/All Required Hardware~Will Not Fit Models w/Factory Autoride Shocks~Will Not Fit All Wheel Drive Models~Cannot Use OEM Wheel And Tire~Does Not Fit Standard Cab~Use 35/12.50R17 Tire w/17x18 Wheel w/5 in. BS w/Minor Trimming~Use 325/65R18 Tire w/1x9 Wheel w/5 in. BS w/Minor Trimming~Use 35/12.50R20 Tire w/20x9 Wheel w/5 in. BS w/Minor Trimming

w/Performance Shocks; 6 in. Lift; GEN ll; w/Factory Steel Suspension Incl. Relocation Brackets/Crossmembers/Skid Plate/Spindles~Coilover Spacers/Blocks And U-Bolts/All Required Hardware~Will Not Fit Models w/Factory Autoride Shocks~Will Not Fit All Wheel Drive Models~Cannot Use OEM Wheel And Tire~Does Not Fit Standard Cab~Use 35/12.50R17 Tire w/17x18 Wheel w/5 in. BS w/Minor Trimming~Use 325/65R18 Tire w/1x9 Wheel w/5 in. BS w/Minor Trimming~Use 35/12.50R20 Tire w/20x9 Wheel w/5 in. BS w/Minor Trimming

6.5 in. Suspension Lift Kit With Fox 2.0 Shocks With Cast Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 2WD

3 in. Lift

6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Block; UBolt; Wheel Spacers

6-7 in. Lift; Incl. Knuckles; Crossmembers; Skid Plate; Spacer; Block/UBolt

6 in. Lift; Incl. Front Knuckles; Crossmembers; Rear Add-A-Leaf; M95 Shocks

With Superlift Shocks 8 in. Suspension Lift Kit With Aluminum Steering Knuckles Without Reservoir Rear Shocks With Stamp Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

With Superlift Shocks 8 in. Suspension Lift Kit With Cast Steel Control Arms Without Reservoir Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

3 in. Lift OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

6 in. Lift; Incl. Rear Block And Add-A-Leafs; No Skid Plate

6 in. Lift; Incl. Front Shock Extensions And Rear Performance Shocks For Models w/o Magnetic Ride Control

w/Stealth Monotube Shocks; 6 in. Lift; GEN ll; w/Factory Aluminum Suspension Incl. Relocation Brackets/Crossmembers/Skid Plate/Spindles~Coilover Spacers/Blocks And U-Bolts/All Required Hardware~Will Not Fit Models w/Factory Autoride Shocks~Will Not Fit All Wheel Drive Models~Cannot Use OEM Wheel And Tire~Does Not Fit Standard Cab~Use 35/12.50R17 Tire w/17x18 Wheel w/5 in. BS w/Minor Trimming~Use 325/65R18 Tire w/1x9 Wheel w/5 in. BS w/Minor Trimming~Use 35/12.50R20 Tire w/20x9 Wheel w/5 in. BS w/Minor Trimming

w/Stealth Monotube Shocks; 6 in. Lift; GEN ll; w/Factory Steel Suspension Incl. Relocation Brackets/Crossmembers/Skid Plate/Spindles~Coilover Spacers/Blocks And U-Bolts/All Required Hardware~Will Not Fit Models w/Factory Autoride Shocks~Will Not Fit All Wheel Drive Models~Cannot Use OEM Wheel And Tire~Does Not Fit Standard Cab~Use 35/12.50R17 Tire w/17x18 Wheel w/5 in. BS w/Minor Trimming~Use 325/65R18 Tire w/1x9 Wheel w/5 in. BS w/Minor Trimming~Use 35/12.50R20 Tire w/20x9 Wheel w/5 in. BS w/Minor Trimming

Nitro Shocks; 6 in. Lift; Incl. Rear Block And Add-A-Leafs; No Skid Plate

6 in. Lift; Incl. Rear Block And Add-A-Leafs; No Skid Plate; Black MAX Shocks

4 in. Lift; w/ADX 2.0 Remote Reservoir Shocks Fits Models With OEM Aluminum or Stamped Steel Control Arms

4 in. Lift; w/ADX 2.0 Remote Reservoir Shocks Fits Models With OEM Cast Steel Control Arms

4 in. Lift; Strut Spacers; Steering Knuckles; Crossmembers; Sway Bar End Links; CV Spacers; w/ADX 2.0 Remote Reservoir Shocks Does Not Fit Models w/Auto Leveling or Auto Ride

6 in. Lift; Incl. Front Knuckles; Crossmembers; Rear Add-A-Leaf Maximum Tire/Wheel Back Spacing 315/75R17 4.5 in.

6 in. Lift; Incl. PN [FTS21250/FTS21251/FTS21265]

4 in. Lift; w/Rear Performance Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

6 in. Front/5 in. Rear Lift Differential Relocation Bracket/U-Bolts/Axle Spacers/Blocks~For Use w/35 in. X 11.50 in. Tires~Hardware Bag~Incl. Sub Frame/Lateral Compression Arms And Mounts/Add-A-Leaf~Requires New Rims With 4.5 in. Backspacing Or Less~Shock Relocation Bracket/Torsion Crossmember Bracket/Knuckles

6 in. Lift; Incl. Front Shock Extensions And Rear Stealth Shocks For Models w/o Magnetic Ride Control

6 in. Lift; Incl. Adjustable Front Struts; Rear Blocks Maximum Tire/Wheel Back Spacing 4.5 in.~OEM Tires/Wheels Can Be Used w/No More than 5 in. Backspacing

With Bilstein Shocks 8 in. Suspension Lift Kit With Cast Steel Control Arms Without Reservoir Rear Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

With Bilstein Shocks 8 in. Suspension Lift Kit With Aluminum Steering Knuckles Without Reservoir Rear Shocks With Stamp Steel Control Arms This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6.5 in. Suspension Lift Kit With Aluminum or Stamp Steel A-Arms With Fox 2.0 Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

4 in. Lift; w/Rear Stealth Shocks Can Not Use OEM Wheel And Tire~Not For Models Equipped w/Adaptive Ride Control

6.5 in. Suspension Lift Kit With Cast Steel A-Arms With Fox 2.0 Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6 in. Suspension Lift Kit With Front Strut Spacer With Fox 2.0 Shocks This suspension kit WILL NOT WORK with any late model GM Truck or SUV equipped with MAGNERIDE from GM Wheel Drive: 4WD

6 in. Lift; Incl. Rear Block And Add-A-Leafs; No Skid Plate; M95 Performance Shocks