Chevrolet Suburban Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

Dana 30 Reverse; Left Hand Thread Dana 44; Standard Rotation; Power Lok Case Bolt; Left Hand Thread

Dana 44/Reverse; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; 1.798 in. Carrier Journal Diamter~Dana 44; Standard Rotation; Standard; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall

Works w/Most Differentials GM 12 Bolt Truck; Carrier shim driver kit

Dana 44/Reverse; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket Dana 44. Standard Open Carrier Case; 30 Spline; 3.92 And Up Carrier Break; 2 3/8 in. Tall; w/o Internal Gears; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket~Dana 44; Standard Rotation; 30 Spline; 3.92 And Up; Bare; Incl. Carrier Shims; Roll Pinion; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 44 Dana 44; Standard Rotation

with Open Differential with 3.42 or Higher Rear Axle Ratio with Empty Case with GM 8.25 IFS Axle

Dana 44 Reverse; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall Dana 44; Standard Rotation; Standard; 30 Spline; 3.73 And Down Carrier Break; 2 1/8 in. Tall

Dana 44/Reverse; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket Dana 44; Standard Rotation; 30 Spline; 3.73 And Down; Bare; Incl. Carrier Shims; Roll Pin; Ring Gear Bolts; Cover Gasket

For Use w/Dana Spicer 60 Dana 60

8.25 in.; Standard GM 8.25 in.; IFS; Standard

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

8.25 in.; Standard Open IFS; Loaded GM 8.25 in.; IFS; Standard Open IFS; Loaded

GM 8.25 in. IFS; 3.23 And Down GM 8.25 in.; IFS; 3.23 And Down

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

For Chrysler 9.25", GM 9.25" IFS, 9.5"; Empty Case; Open; Use With Internal Kit GM9.5BI; 3.42 Ratio Carrier and Numerically Higher

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 35 Splines with Dana 60 Axle with Spider Gears

GM 9.5 in. And GM 9.76 in. Open Loaded Carrier; 3.42 Ratio And Up GM 9.5 in.; 12 bolt cover; Open Loaded Carrier; 3.42 Ratio And Up~GM 9.76 in.; 12 bolt cover; Open Loaded Carrier; 3.42 Ratio And Up

10 Bolt Differential Cover 2.76 Rear Axle Ratio and Greater 28 Spline 8.5 In. Ring Gear w/RPO Code G80 (Positraction/Limited Slip)

GM 9.5 in. And GM 9.76 in. Open Loaded Carrier; 3.23 Ratio And Down GM 9.5 in.; 12 bolt cover; Open Loaded Carrier; 3.23 Ratio And Down~GM 9.76 in.; 12 bolt cover; Open Loaded Carrier; 3.23 Ratio And Down

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

w/RPO Code GU6 (3.42 Axle Ratio)

30 Spline

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 32 Splines with Dana 60 Axle

with Empty Case with GM 8.25 IFS Axle 12 Bolt with 3.73 or Higher Rear Axle Ratio with 30 Spline Teeth with Open Differential

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle