Chevrolet Suburban Engine Camshaft Replacement

It is a custom camshaft from Smallwood Race Development (SRD) for vehicles with the 6.2L engine. It features the SRD214-355 profile.

Condition: Excellent (A)
Mileage: 12,000 miles

OE Stock Replacement Grind

OE Stock Replacement Grind

Cast Iron; OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

OE Stock Replacement Grind

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Hyd Roller 1500-6500 rpm Adv Dur. 0.050 Int/Exh 234/238 Deg. Lift at Valve Int/Exh 0.539/0.548 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Idle Vacuum at 1000 RPM - 12 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Match w/Performer RPM Air Gap Intake 7516/Thunder Series AVS Carb 1813~ And Performer RPM E-Tech Heads 60975~ This Combo Produces 435hp and 435 ft.-lbs. Of Torque

Hyd Roller 1500-6500rpm Adv. Dur. at 0.050 Int/Exh 234/238 Deg. Lift at Valve Int/Exh 0.539/0.548 in. Lobe Seps 114 Deg. Intake Center Line 110 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Idle Vacuum - 13 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Match w/Pro-Flo XT EFI System 3528 and Performer E-Tech Head 60975~ This Combo Produces 440hp and 425 ft.-lbs of Torque

; Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Only fits applications with 12606358 VVT/Camshaft Phaser Actuator. Verify with a GM Dealer before ordering. Other solenoid is 12585994, this solenoid calls for either 156- or 656- camshafts.

Hyd Roller 1500-5500rpm Adv. Dur. 0.050 Int/Exh 212/222 Deg. Lift at Valve Int/Exh 0.462/0.479 in. Lobe Seps 112 Deg. Intake Center Line 107 Deg. Legal For Use On Pre-Pollution Controlled Vehicles Idle Vacuum at 1000 RPM - 16 inch~ For Use On Pre-Pollution Controlled Vehicles (PPCV)~ Matched w/Performer EPS Intake 2716/Performer Carb 1407~ And Performer E-Tech Head 60975~ This Combo Produces 363hp and 405 ft.-lbs. of Torque~ Matching Edelbrock Roller Tappet Lifter Set 97423

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.

Fits only 1987 and newer blocks that have provisions (spider tray) for a roller camshaft.