Chevrolet Tahoe Disc Brake Rotor Replacement

with Police Package

Coated Hat and Edge for Rust Resistance

Except Limited Slip Axle

Coated Hat and Edge for Rust Resistance

Except Limited Slip Axle; Coated Hat and Edge for Rust Resistance

Coated Hat and Edge for Rust Resistance

Except Limited Slip Axle

Coated Hat and Edge for Rust Resistance

Replaces 1056825 Replaces 56825RGS

Replaces 5962R Rotor Diameter 12in

11 inch Rear Drum

Single Piston Rear Calipers

Silver; Rotor Diameter 12"

Rotor Diameter 325mm with Single Piston Caliper

Replaces 1056242 Replaces 56242RGS

Coated Hat and Edge for Rust Resistance

Except Limited Slip Axle

w/ 325mm/12.8in Outside Diameter

11 inch Rear Drum

Rotor Diameter 12in

Except Police Package

with 325 mm Diameter Brake Rotor

Engineered With High Carbon Metallurgy To Better Dissipate Heat and Resist Distortion in Extreme Driving Conditions

Single Piston Rear Calipers

Advantage Coated; Rotor Diameter 330mm; Dual Piston Caliper

6 Stud Wheel with 325 (mm) Rear Brake Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

With Single Piston Rear Calipers

Gold Black Hat; Rotor Diameter 12"

Silver

6 Stud Wheel with 304.8 (mm) Front Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

Silver

Except Heavy Duty Power Brakes

Silver; Rotor Diameter 330mm; Dual Piston Caliper

w/ Brake System J49

Replaces 5962 Rotor Diameter 12in

Engineered With High Carbon Metallurgy To Better Dissipate Heat and Resist Distortion in Extreme Driving Conditions

with Heavy Duty Brakes

Police

With Single Piston Rear Calipers

Silver

Gold Black Hat

Except Heavy Duty Power Brakes

Advantage Coated

Base Brakes 4 Piston Front Calipers

Silver; With Brake Code 1LR

Advantage Coated; Standard Duty Design With Holes Around Hat; With Police Package

w/ 330mm Rotors w/ 6 Studs 96mm Overall Height

6 Stud Wheel with 304.8 (mm) Front Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

Standard Duty Design w/ Holes Around Hat

Dual Piston Front Calipers

Police

6 Stud Wheel with 345 (mm) Rear Brake Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

11 inch Rear Drum

11 inch Rear Drum

Single Piston Rear Calipers

Single Piston Rear Calipers

Except Limited Slip Axle

Single Piston Rear Calipers

Single Piston Rear Calipers

11 inch Rear Drum

11 inch Rear Drum

Single Piston Rear Calipers

Single Piston Rear Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Dual Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Base Brakes 4 Piston Front Calipers

Except Limited Slip Axle

Except Limited Slip Axle

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

Gold Black Hat; Rotor Diameter 330mm; Dual Piston Caliper

w/ Police Package
(7700 LBS GVW)

without Heavy Duty Brakes

With Single Piston Rear Calipers

Silver; Standard Duty Design With Holes Around Hat; With Police Package

Police Package; Engineered With High Carbon Metallurgy To Better Dissipate Heat and Resist Distortion in Extreme Driving Conditions

Except Heavy Duty Power Brakes

Advantage Coated

Rotor Diameter 325mm with Single Piston Caliper

Base Brakes 4 Piston Front Calipers

w/ 325mm Rotors

with Police Package Pending Supersession to BD180812E Black E-Coat on non-braking surface to prevent rust and corrosion

with 330 (mm) Front Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

Gold Fully Coated; With Brake Code 1LR

Gold Black Hat; Standard Duty Design With Holes Around Hat; With Police Package

Advantage Coated; With Brake Code 1LR

Gold Black Hat

Except Heavy Duty Power Brakes

Gold Enhanced Performance Police

w/ Perforated Rotor Hat

w/ 330mm Rotors w/ 6 Studs 96mm Overall Height

w/ 325mm/12.8in Outside Diameter

GM Original Equipment; 7,200 lb Vacuum Power Brakes; DELPHI/SAG

Except Brake Linings Modification for Urban use

Gold Enhanced Performance Police

Standard Duty Design w/ Holes Around Hat

with Police Package with Heavy Duty Power [J55] Brake System

w/ Police Package
(7700 LBS GVW)

w/ Heavy Duty Power Brakes (RPO J55)

w/ 325mm/12.8in Outside Diameter

Rotor Diameter 325mm with Single Piston Caliper

with 330 (mm) Front Rotor Black E-Coat on non-braking surface to prevent rust and corrosion

with Police Package

Brembo 6 Piston Front Calipers

Brembo 6 Piston Front Calipers

w/ Police Package
(7700 LBS GVW)

with Police Package Black E-Coat on non-braking surface to prevent rust and corrosion

Specialty Performance; With Brake Code 1LR

Disc Brake Rotor; 7,200 lb Hydraulic Power Brakes; 330MM DIAMETER, 90MM LONG, STAMPED 25757801, 30 MM THICK

Disc Brake Rotor; 3.08R (GU4), POSITRACTION LIMITED SLIP REAR AXL (G80), BRAKE LININGS MODIFICATION FOR URBAN USE (1LR); 2nd Design; USE ON VEHICLES With 9C1) (FOR 1st DESIGN SEE 23195438

Disc Brake Rotor; 7,700 lb Vacuum Power Brakes; EXCEPT BRAKE LININGS MODIFICATION FOR URBAN USE (1LR)

Disc Brake Rotor; 7,700 lb Vacuum Power Brakes; 13IN

Police Package; Engineered With High Carbon Metallurgy To Better Dissipate Heat and Resist Distortion in Extreme Driving Conditions

Black E-Coat on non-braking surface to prevent rust and corrosion

w/ Perforated Rotor Hat

For FMSI Pad No. D369; Vented; 6 Bolt Holes; 305mm Dia.; 58mm Height; 29mm Thick; 78.7mm Center Hole Dia.

Brembo 6 Piston Front Calipers

w/ Police Package
(7700 LBS GVW)

J55

For FMSI Pad No. D369; Vented; 6 Bolt Holes; 295mm Dia.; 67mm Height; 33mm Thick; 78.7mm Center Hole Dia.

Specialty Performance

Disc Brake Rotor; 3.42 RATIO (GU6), POSITRACTION LIMITED SLIP REAR AXL (G80)

w/ Heavy Duty Power Brakes (RPO J55)

Brembo 6 Piston Front Calipers

For FMSI Pad No. D2174; Vented; 6 Bolt Holes; 345mm Dia.; 53mm Height; 20mm Thick; 78.6mm Center Hole Dia.

with Police Package Black E-Coat on non-braking surface to prevent rust and corrosion

For FMSI Pad No. D834; Vented; 6 Bolt Holes; 330mm Dia.; 96mm Height; 30mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D785; Vented; 6 Bolt Holes; 325mm Dia.; 85mm Height; 20mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D1194; Vented; 6 Bolt Holes; 345mm Dia.; 85mm Height; 20mm Thick; 78.5mm Center Hole Dia.

Brembo 6 Piston Front Calipers

w/ Police Package
(7700 LBS GVW)

Brembo 6 Piston Front Calipers

For FMSI Pad No. D785; Vented; 6 Bolt Holes; 325mm Dia.; 85mm Height; 20mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D1363; Vented; 6 Bolt Holes; 330mm Dia.; 55mm Height; 30mm Thick; 78.5mm Center Hole Dia.

For FMSI Pad No. D834; Vented; 6 Bolt Holes; 330mm Dia.; 96mm Height; 30mm Thick; 78.7mm Center Hole Dia.

Except Brake Linings Modification for Urban use

1-Piece Disc Brake Rotor BRAKE ROTOR

1-Piece Disc Brake Rotor BRAKE ROTOR

Vented Rotor; 11.61 in. Dia.; 2.60 in. Height 6 Lug Wheel

Vented Rotor; 11.61 in. Dia.; 2.60 in. Height 6 Lug Wheel

Except Heavy Duty Power Brakes

Vented Rotor; 12.01 in. Dia.; 2.29 in. Height

Vented Rotor; 12.01 in. Dia.; 2.29 in. Height

For FMSI Pad No. D785; Vented; 6 Bolt Holes; 305mm Dia.; 58mm Height; 29mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D785; Vented; 6 Bolt Holes; 305mm Dia.; 58mm Height; 29mm Thick; 78.7mm Center Hole Dia.

Vented Rotor; 12.01 in. Dia.; 2.29 in. Height

Vented Rotor; 12.01 in. Dia.; 2.29 in. Height

For FMSI Pad No. D369; Vented; 6 Bolt Holes; 295mm Dia.; 67mm Height; 33mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D369; Vented; 6 Bolt Holes; 295mm Dia.; 67mm Height; 33mm Thick; 78.7mm Center Hole Dia.

For FMSI Pad No. D2250; Vented; 6 Bolt Holes; 342mm Dia.; 59mm Height; 30mm Thick; 78.6mm Center Hole Dia.

Vented Rotor; 12.76 in. Dia.; 3.37 in. Height Fits Vehicles w/Single Piston Rear Caliper

Vented Rotor; 12.76 in. Dia.; 3.37 in. Height Fits Vehicles w/Single Piston Rear Caliper

For FMSI Pad No. D2174; Vented; 6 Bolt Holes; 345mm Dia.; 53mm Height; 20mm Thick; 78.6mm Center Hole Dia.

For FMSI Pad No. D2174; Vented; 6 Bolt Holes; 345mm Dia.; 53mm Height; 20mm Thick; 78.6mm Center Hole Dia.

For FMSI Pad No. D785; Vented; 6 Bolt Holes; 305mm Dia.; 58mm Height; 29mm Thick; 78.7mm Center Hole Dia.

Vented Rotor; 12.99 in. Dia.; 3.78 in. Height

Vented Rotor; 12.99 in. Dia.; 3.78 in. Height

Vented Rotor; 13.58 in. Dia.; 3.37 in. Height

Vented Rotor; 13.58 in. Dia.; 3.37 in. Height