Chevrolet Tahoe Suspension Spindle Drop Set Replacement

Ridetech 88-98 Chevy C1500 2in Drop Spindles

88-98 Chevy C-1500 2in Drop Spindles (with LD Brakes, 1in thick rotors) Pair

2" LOWERING SPINDLES FITS 92-98 GM 1500 2WD SINGLE CAB, 88-91 EXT CAB & 454 SS ALL CABS REQUIRES MINIMUM 15" WHEEL W/ 3.5" BACKSPACING OR LESS MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" LOWERING SPINDLES REQUIRES 17" RIMS OR LARGER RIMS SMALLER THAN 20" WILL REQUIRE BALL JOINT TRIMMING FITS MODELS W/ CAST STEEL CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" LOWERING SPINDLES REQUIRES 17" RIMS OR LARGER WILL NOT WORK W/ 16" FACTORY RIMS RIMS SMALLER THAN 20" WILL REQUIRE BALL JOINT TRIMMING MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

Lowering Rate: F: 2.0"

AT: Minimum Wheel size 17" HH: Designed to be use with min 3" or lower application Lowering Rate: F: 2.0"

AT: Minimum Wheel size 17" Lowering Rate: F: 2.0"

AT: Minimum Wheel size 17" HH: Designed to be use with min 3" or lower application Lowering Rate: F: 2.0"

AT: Minimum Wheel size 17" Lowering Rate: F: 2.0"

2" LOWERING SPINDLES REQUIRES 18" RIMS OR LARGER W/ 6" BACKSPACING OR LESS THESE SPINDLES FEATURE A SLIGHTLY REDUCED TURNING RADIUS TO FIT FACTORY 18" WHEELS THE TURNING RADIUS CAN BE INCREASED IF RUNNING 20" RIMS OR LARGER MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

2" LOWERING SPINDLES REQUIRES 18" RIMS OR LARGER RIMS SMALLER THAN 20" WILL REQUIRE BALL JOINT TRIMMING FITS MODELS W/ STAMPED STEEL OR ALUMINUM CONTROL ARMS ONLY MAXTRAC SUSPENSION DOES NOT RECOMMEND USING WHEELS WIDER THAN 9" OR WHEELS WITH LESS THAN 4.5" BACKSPACING. DOING SO WILL RESULT IN VOIDING ANY AND ALL MANUFACTURER WARRANTIES

BB: Minimum Wheel size 20" Lowering Rate: F: 2.0"