Chevrolet Traverse Alignment Cam Bolt Kit Replacement

Adjusts Camber -1.25 Degrees to +1.25 Degrees

Plus or Minus 1.5 Degree Pinion Angle

16 mm Bolt Adjusts Camber -1.75 Degrees to +1.75 Degrees Single Offset

Adjusts Camber -1.25 Degrees to +1.25 Degrees

Axis Cam Design - For use on vehicles with or without elongated strut flange holes For Replacement of 16mm Bolts Camber Plus or Minus 1.75 Degrees

Camber Plus or Minus 1.50 Degrees

12mm - adds +/- 0.75 deg camber

Adjustment Range: +/-1.5 degree Camber

Plus or Minus 1.50 Degree Caster & Plus or Minus 1.50 Degree Pinion Angle