Dodge D350 Differential Ring and Pinion Replacement

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Rear; Chrysler 9.25 in.; 12 Cover Bolts; 12 Ring Gear Bolts; 31 Axle Spline; 29 Pinion Spline; Standard Rotation

with 3.55 Gear Ratio with Chrysler 9.25 Axle

with 4.56 Gear Ratio with Dana 60 Axle

with 4.88 Gear Ratio with Dana 60 Axle

with 5.86 Gear Ratio with Dana 60 Axle

Dana 70 U; 10 Cover Bolts; 12 Ring Gear Bolts; 32 Axle Spline; 29 Pinion Spline; Standard Rotation

with 5.38 Gear Ratio with Dana 60 Axle

For Dana 60; 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

9.25 In. Ring Gear w/4.10 Axle Ratio

For Dana 70; 5.86 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 70; 3.73 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

with 3.54 Gear Ratio with Dana 60 Axle

For Dana 60; 4.88 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 5.86 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 3.54 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 5.38 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 70; 3.54 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

with 3.90 Gear Ratio with Chrysler Axle

For Dana 70; 4.10 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 3.73 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 5.13 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

with 7.17 Gear Ratio with Dana Model 60 Axle

with 5.86 Gear Ratio with Dana 70 Axle

with 3.73 Gear Ratio with Dana 60 Axle

For Dana 60; 5.13 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

Dana 60 Axle w/3.54 Axle Ratio

Dana 60 Axle w/4.10 Axle Ratio

with 4.10 Gear Ratio with Dana 60 Axle

with 5.13 Gear Ratio with Dana Model 60 Axle

with 4.56 Gear Ratio with Dana 70 Axle

9.25 In. Ring Gear w/3.90 Axle Ratio

with 3.54 Gear Ratio with Dana 70 Axle

9.25 In. Ring Gear w/3.55 Axle Ratio

For Chrysler 9.25" (12 Bolt); 4.56 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; Requires Notched Cross Pin Part# 80-0280-1 For Ring Gear Clearance; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 4.10 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.92 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.23 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.55 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

Bolts Not Included with 3.73 Gear Ratio with Dana 60 Axle

with 4.88 Gear Ratio with Dana Model 70 Axle

Bolts Not Included with 4.10 Gear Ratio with Dana 60 Axle

Bolts Not Included with 5.38 Gear Ratio with Dana 60 Axle

with 4.56 Gear Ratio with Dana 60 Axle with Thick Gear

9.25 In. Ring Gear w/3.92 Axle Ratio

For Dana 70; 4.56 Ratio; Has 5/8" Offset Of Pinion; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 60; 4.56 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier; 1994-2002 Front Or Rear Dodge Ram Applications Requires Preload Shims Part# 1118

For Dana 60; 4.10 Ratio; Thin Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

Bolts Not Included with 7.17 Gear Ratio with Dana 60 Axle

For Dana 60; 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 5.13 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

Dana 60/Irregular Cover; 4.56 Ratio Dana 60; 4.56 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; Fits 4 Series Carrier

Dana 60/Irregular Cover; 5.13 Ratio Dana 60; 5.13 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; Fits 4 Series Carrier

Dana 60 Irregular Cover; Dana 60; 4.11 Ratio Dana 60; 4.11 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; Fits 3 Series Carrier

Dana 60; 5.13 Gear Ratio Dana 60; 5.13 Ratio; Thick

High Performance Replacement; Dana 60; 5.38 Gear Ratio Dana 60; 5.38 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; Fits 4 Series Carrier

Dana 60; 4.56 Gear Ratio Dana 60; 4.56 Ratio~Dana 60; 4.56 Ratio; thick for 4.10 and down carrier~Dana 60; 4.56 Ratio;Dana 60; 4.56 Ratio. thick for 4.10 and down carrier

Dana 60; 4.88 Gear Ratio Dana 60; 4.88 Gear Ratio~Dana 60; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; Fits 3 Series Carrier

For Dana 60; 4.88 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 3.54 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

Bolts Not Included with 3.54 Gear Ratio with Dana 60 Axle

Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.88 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.88 Ratio

Dana 60/Reverse; High Performance Replacement; 4.88 Gear Ratio Dana 60; High Performance Replacement; 4.88 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; Fits 4 Series Carrier

9.25 in. 12 Bolt; 3.21 Ratio; 29 Spline; 9.25 in. Ring Gear Diameter Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.21 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.21 Ratio; 29 Spline; 9.25 in. Ring Gear Diameter

9.25 in. 12 Bolt; 4.56 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.56 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.56 Ratio

9.25 in. 12 Bolt; 3.90 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.90 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.90 Ratio

For Dana 60; 3.73 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

with 6.17 Gear Ratio with Dana 70 Axle

Dana 60/Irregular Cover; 6.17 Ratio Dana 60; 6.17 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 6.17 Ratio; Fits 4 Series Carrier

Dana 60/Irregular Cover; 4.10 And Down; 4.30 Ratio; Will Work w/4.27 in 4WD Dana 60; 4.10 And Down; 4.30 Ratio; Will Work w/4.27 in 4WD~Dana 60; Standard Rotation; Ring and Pinion Set; 4.30 Ratio; Fits 3 Series Carrier; Will Work w/4.27 in 4WD

Dana 60/Irregular Cover; 5.86 Ratio Dana 60; 5.86 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.86 Ratio; Fits 4 Series Carrier

Dana 70; 5.13 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 5.13 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 5.13 Ratio; 5/8 in. Offset~Dana 70; 5.13 Ratio; 5/8 in. Offset

Dana 70; 4.88 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.88 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 4.88 Ratio; 5/8 in. Offset~Dana 70; 4.88 Ratio; 5/8 in. Offset

Dana 70; 4.56 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.56 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 4.56 Ratio; 5/8 in. Offset~Dana 70; 4.56 Ratio; 5/8 in. Offset

Dana 70; 4.11 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.11 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 4.11 Ratio; 5/8 in. Offset~Dana 70; 4.11 Ratio; 5/8 in. Offset

Dana 60; High Performance Replacement; 5.38 Gear Ratio; Thick Dana 60; High Performance Replacement; 5.38 Gear Ratio; Thick

For Chrysler 9.25" (12 Bolt); 3.91 Ratio; Will Not Fit 2011 & Newer Applications

For Chrysler 9.25" (12 Bolt); 3.55 Ratio; Will Not Fit 2011 & Newer Applications

For Chrysler 9.25" (12 Bolt); 4.10 Ratio; Will Not Fit 2011 & Newer Applications

Dana 60; 7.17 Ratio Dana 60; 7.17 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 7.17 Ratio; Fits 4 Series Carrier

For Chrysler 9.25" (12 Bolt); 4.56 Ratio; Requires Notched Cross Pin Part# 80-0280-1 For Ring Gear Clearance; Will Not Fit 2011 & Newer Applications

9.25 in. 12 Bolt; 3.55 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.55 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.55 Ratio

9.25 in. 12 Bolt; 4.11 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.11 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.11 Ratio

Dana 60/Irregular Cover; 3.73 Ratio Dana 60; 3.73 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; Fits 3 Series Carrier

Bolts Not Included with 6.17 Gear Ratio with Dana 60 Axle

Dana 70; 4.56 Ratio; 5/8 in. Offset; Thick Gear For 4.10 And Down Carrier Dana 70 Rear; Thick Ring and Pinion Set; 4.56 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 4.56 Ratio; 5/8 in. Offset; Thick Gear For 4.10 And Down Carrier~Dana 70; 4.56 Ratio; 5/8 in. Offset; Thick Gear For 4.10 And Down Carrier

Dana 60/Irregular Cover; 3.54 Ratio Dana 60; 3.54 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; Fits 3 Series Carrier

Dana 70; 7.17 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 7.17 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 7.17 Ratio; 5/8 in. Offset~Dana 70; 7.17 Ratio; 5/8 in. Offset

For Dana 60; 4.56 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 5.38 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 4.10 Ratio; Thin Ring Gear; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 4.88 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 6.17 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

Dana 70; 3.73 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 3.73 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 3.73 Ratio; 5/8 in. Offset~Dana 70; 3.73 Ratio; 5/8 in. Offset

Dana 70; 3.54 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 3.54 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 3.54 Ratio; 5/8 in. Offset~Dana 70; 3.54 Ratio; 5/8 in. Offset

with Thick Gear with 4.10 Gear Ratio and Down Carriers with 4.88 Gear Ratio with Dana 60 Axle

Bolts Not Included with 5.86 Gear Ratio with Dana 60 Axle

with 5.13 Gear Ratio with Dana 60 Axle with Thick Gear

Dana 60; 4.09 Ratio Dana 60; 4.09 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.09 Ratio; Fits 3 Series Carrier