Dodge Magnum Exhaust Muffler Replacement

Modifications and/or Additional Parts May Be Required for Installation

Challenge LTW OE system was a welded assembly. It is recommended that all parts noted [1] should be replaced.

If welded assembly, replace all required parts

2.25 Offset In/2.25 Offset Out; Clamp On; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

Direct-Fit; Oval; 4.25 x 8 13/16 in.; 2.5 in. ID/OD; 16 in. Shell Length; 18.5 in. Overall Length; No Flow Directors

3.0 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel

2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 19.5 in. Overall Length; Aluminized Steel

3.0 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/2.25 in. Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 13 in.; 19 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

3.0 in. Offset Inlet/Offset Outlet; Case Dimensions 5 in. x 10 in. x 13.5 in.; 17.5 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; Aluminized Steel Not Direct Fit-Some Adaptation Required

2.25 in. Offset Inlet/Opposite Side Offset Outlet; Case Dimensions 4 in. x 9.75 in. x 17 in.; 23 in. Overall Length; 409 Stainless Steel Not Direct Fit-Some Adaptation Required

3.0 in. Inlet/Outlet; Body Size 6 in. x 12 in.; 17 in. Overall Length; Aluminized Not Direct Fit-Some Adaptation Required

3.0 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case Not Direct Fit-Some Adaptation Required

2.5 in. Inlet/Outlet; 409 Stainless Internal Components; 304 Stainless Case Not Direct Fit-Some Adaptation Required