Dodge Ram 1500 Differential Replacement

Dana 30/44 Reverse Dana 44; Disconnect Design~Outer slinger

Dana 25/27/30/44/50 Dana 44; Disconnect Design~Inner slinger

Dana 44; Disconnect Design

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

30 Spline; 1.31 in. Axle Shaft Diameter; 3.92 And Up Ring Gear Pinion Ratio; 8.5 in.;Dana 44/Reverse;Applies To Non-Disconnect

29 Spline; 2.56 And Up Yukon Dura Grip Positraction; Chrysler 8.25 in. Rear; 29 Spline

31 Spline; 1.32 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio

30 Spline; 1.31 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Front 8.5 in.; Front Dana 44/Reverse;Applies To Non-Disconnect

30 Spline; 3.92 And Up Dana 44; Disconnect Design; 30 Spline; 3.92 And Up~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.92 And Up; 7/16 in. Bolt holes

Dana 44 Reverse; 30 Spline; 3.92 And Up Yukon Dura Grip positraction for Dana 44; 30 Spline axles; 3.92 And Up ratios~Yukon Dura Grip positraction; Dana 44; 30 Spline axles; 3.92 And Up ratios

GM 12 Bolt; 30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Yukon Dura Grip Positraction; Dana 44; 30 Spline; Fits 3.73 and Down or Thick Gears

31 Spline; Composite Clutch Chrysler 9.25 in.; 31 Spline; Composite Clutch~Yukon Positraction Carrier (Limited Slip); Fits Chrysler 9.25 in. Rear; 31 Spline; Composite Clutches;

29 Spline; 1.21 in. Axle Shaft Diameter; 2.73 And Up Ring Gear Pinion Ratio; Rear 8.375 in.

30 Spline; 1.31 in. Axle Shaft Diam; 3.73 And Down Rng Gr Pin Rat; May Apply To Discnct Only Certain Applic ;Fr Dana 44/Rev; Rear Dana 44

w/Limited Slip Differential; For Use w/9.25 in. 12 Bolt Axle

33 Spline; Front 9.25 in.; 1.37 in. Axle Shaft Diameter; All Ratio

Incl. Differential Case w/Gear Set; Bearing Set; Shim Set; Ring Gear Bolts and Cover Gasket; For Use w/Dana 44

9.5 in. 14 Bolt; 33 Spline Axles Chrysler 9.25 in.; 33 Spline Axles~Yukon Dura Grip Positraction / Limited Slip; Chrysler 9.25 in. Front; 33 Spline Axles; 2.445 in. Deck Height

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

30 Spline; 3.73 And Down Dana 44; Disconnect Design; 30 Spline; 3.73 And Down~Dana 44; Yukon Grizzly Locker; 30 Spline; 3.73 And Down Ratio or Thick Gears; 7/16 in. Bolt holes

30 Spline; 3.92 And Up; Dana 44; Front and Rear Applies to Non-Axle Disconnect Style Housing Only~For Use/Non-Thick Ring Gears Only~Not For Use w/Factory JK

31 Spline; 1.32 in. Axle Shaft Diameter; 2.76 - 4.56 Ring Gear Pinion Ratio; Rear 9.25 in.

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

32 Spline; 1.41 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 70

30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Rear Dana 60/61

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

30 Spline; Rear 11.5 in.; 1.55 in. Axle Shaft Diameter; All Ratios

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.92 and up

Axle: DANA 44 Shaft: 1.31" Spline: 30 Ratio: 3.73 and down

29 Spline; 1.21 in. Axle Shaft Diameter; Rear 8.375 in.; 2.73 And Up Ring Gear Pinion Ratio

30 Spline; 3.73 Ratio And Down Dana 44; Disconnect Design; 30 Spline; 3.73 Ratio And Down

Dana 44 Reverse; 30 Spline; 3.92 Ratio And Up Dana 44; Disconnect Design; 30 Spline; 3.92 Ratio And Up

Open To Lock; 35 Spline; 4.56 Gear Ratio Up Dana 60

Dana 44; 30 Spline; 3.92 And Up Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Dana 44; 30 Spline; 3.73 And Down Ring Gear Pinion Ratio; 1.31 in. Axle Shaft Diameter

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

30 Spline; 1.55 in. Axle Shaft Diameter; Rear 11.5 in.; All Ratios

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter; Rear

Dana Super 60 Performance; 40 Spline; 1.70 in. Axle Shaft Diameter; 4.10 And Down; 9.75 in. Ring Gear; Also Fits Ford And GMC 3/4 Ton Truck/Van/SUV

Dana 60; 30 Spline; 1.31 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60; 40 Spline; 1.70 in. Axle Shaft Diameter; 4.56 And Up; 9.75 in. Ring Gear Diameter; Also Fits Ford And GMC 3/4 Ton Truck/Van/SUV

Open To Lock; 30 Spline; 4.56 Gear Ratio Up Dana 60

Open To Lock; 35 Spline; 4.10 Gear Ratio Down Dana 60

Open To Lock; 30 Spline; 4.10 Gear Ratio Down Dana 60

9.25 in. Trac Right