Dodge Ram 2500 Van Differential Carrier Replacement

Dana 60 Reverse Or Rear Dana 60; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head~Dana 70 U; Power Lok Case Bolt; 7/16 in. x 14 x 3.5 in.; 9/16 in. Hex Head

One Bearing; Chrysler 8.75 in; 42 Case Housing; 1.75in. Pinion Shaft Dia; No Return Dana 70 U

For Chrysler 9.25" (12 Bolt); Empty Case; Open; Use With Internal Kit C9.25BI

9.25 in. 12 Bolt; Standard; ABS Compatible Chrysler 9.25 in. Rear; Standard Open Carrier Case; w/o internal gears; ABS Compatible~Chrysler 9.25 in.; Standard; ABS Compatible

For Use w/Dana Spicer 60 Dana 60

For Use w/Dana Spicer 80 Dana 80

with Chrysler 9.25 Axle with Empty Case with Open Differential

Standard; For Use w/Chrysler 11.5 in. Differential Chrysler 10.5 in.

Dana 60/Reverse; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible Dana 60; Standard; 4.10 And Down Carrier Break Semi-Float/Full-Float; 2 1/8 in. Tall; ABS Compatible

Dana 60; Standard; Open; 4.10 And Down Carrier Break Dana 60; Standard; Open; 4.10 And Down Carrier Break

Dana 70; Replacement; Standard; 4.56 And Up Carrier Break Dana 70 U; Replacement; Standard; 4.56 And Up Carrier Break

Dana 60

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; Not ABS Compatible

Dana 70; Standard; 4.10 And Down Carrier Break; ABS Compatible Dana 70 U; Standard; 4.10 And Down Carrier Break; ABS Compatible

9.25 in. 12 Bolt; Dura Grip Case; Bare Chrysler 9.25 in.; Dura Grip Case; Bare

Dana 60/Reverse; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible Dana 60; Standard; 4.56 And Up Carrier Break; 2 7/16 in. Tall; ABS Compatible

with Open Differential Case Split 4.10 And Down with 35 Splines with Dana 70U Axle

Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 3.73 And Down Carrier Break; ABS Compatible

8.25 in. 10 Bolt; 29 Splines; 2.56 Gear Ratio And Up Chrysler 8.25 in.; 29 Splines; 2.56 Gear Ratio And Up

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; Not ABS Compatible

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 35 Splines with Dana 60 Axle with Spider Gears

Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible Dana 80; Standard; 35/37 Spline; 4.10 And Up Carrier Break; ABS Compatible

Dana 70; Standard; 4.56 And Up Carrier Break; ABS Compatible Dana 70 U; Standard; 4.56 And Up Carrier Break; ABS Compatible

with Limited Slip Differential with Trac Lok Replaces OE Part Number(s) 52111420AA, 5161549AA with 31 Splines with Chrysler 9.25 Axle

11.5 in.; Standard Chrysler 11.5 in.; Standard

Dana 60/Reverse; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible Dana 60; TracLoc; For Use w/Full-Float; 4.10 And Down Carrier Break; 2 1/8 in. Tall; ABS Compatible

11.5 in.; Standard; Loaded AAM 11.5 in. Rear; Standard Open Carrier Case; Loaded with 30 Spline Spider Gear Kit; 12 Bolt Case~Chrysler 11.5 in.; Standard; Loaded

with Chrysler 8.25 Axle with Spider Gears Case Split 2.56 And Up Replaces OE Part Number(s) 5209877AC with 29 Splines with Trac Lok Limited SLip Differential

with Loaded Open Case with 3.73 Gear Ratio and Up with 35 Splines with Dana 80 Axle

with Open Differential with Semi-Float Axle Case Split 4.10 And Down with 32 Splines with Dana 60 Axle

with Dana 60 Axle with Trac-Lok Differential Case Split 4.56 And Up Full-Floating with 30 Spline Teeth

Dana 70; Power Lok; 4.10 And Down Carrier Break; ABS Compatible Dana 70 U; Power Lok; 4.10 And Down Carrier Break; ABS Compatible

Dana 80; 35 Spline; 4.10 And Up; non-ABS Dana 80; 35 Spline; 4.10 And Up; non-ABS

with Standard Differential with 37 Spline Teeth with 4.10 or Higher Rear Axle Ratio with Dana 80 Axle

with Dana 60 Axle with Trac Lok Case Split 4.10 And Down Replaces OE Part Number(s) 4506058AB with 30 Splines

with Loaded Limited Slip Case Case Split 4.10 And Up with 37 Splines with Dana 80 Axle

with Eaton E-Locker Case Split 4.56 And Up with 35 Splines with Dana 60 Axle

with Standard Differential with 3.73 and Down Gear Ratio with 35 Spline Teeth with Dana 80 Axle

with Power Lok Case Split 4.56 And Up with 35 Splines with Dana 70 Axle

with Power-Lok Case Split 4.10 And Down with 35 Splines with Dana 70U Axle