Dodge W250 Differential Ring and Pinion Replacement

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Dana Model 70 Axle, Drive Ratio 4.56

Rear; Chrysler 9.25 in.; 12 Cover Bolts; 12 Ring Gear Bolts; 31 Axle Spline; 29 Pinion Spline; Standard Rotation

with 4.27 Gear Ratio with Dana Model 44 Axle

with 4.56 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.13 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 4.56 Gear Ratio with Dana Model 44 Axle

with 4.09 Gear Ratio with Dana 44 Axle with Standard Gear

with 3.54 Gear Ratio with Dana 44 Axle

with 3.55 Gear Ratio with Chrysler 9.25 Axle

with 4.56 Gear Ratio with Dana 60 Axle

with 5.13 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 5.38 Gear Ratio with Dana Model 44 Axle

with 4.88 Gear Ratio with Dana 60 Axle

with 5.86 Gear Ratio with Dana 60 Axle

Dana 70 U; 10 Cover Bolts; 12 Ring Gear Bolts; 32 Axle Spline; 29 Pinion Spline; Standard Rotation

with 5.38 Gear Ratio with Dana 60 Axle

For Dana 44; 5.13 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.73 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.56 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 5.89 Gear Ratio with Dana Model 44 Axle

For Dana 44; 4.27 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 3.07 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier

For Dana 60; 4.10 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 44; 3.92 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 4.88 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

9.25 In. Ring Gear w/4.10 Axle Ratio

For Dana 70; 5.86 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 70; 3.73 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

with 3.54 Gear Ratio with Dana 60 Axle

For Dana 44; 4.09 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 44; 5.38 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 60; 4.88 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 44; 4.56 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 60; 5.86 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 3.54 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 60; 5.38 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 70; 3.54 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

with 3.90 Gear Ratio with Chrysler Axle

with 4.88 Gear Ratio with Dana Model 44 Axle

For Dana 70; 4.10 Ratio; Has 5/8" Offset Of Pinion; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 44; 5.89 Ratio; Requires a 3.92 and Numerically Higher Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 60; 3.73 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

For Dana 44; 5.38 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

For Dana 60; 5.13 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

with 4.88 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

with 3.92 Gear Ratio with Dana 44 Axle with Thick Gear - For use with 3.73 Gear Ratio and Down Carrier Case

For Dana 44; 3.54 Ratio; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

with 7.17 Gear Ratio with Dana Model 60 Axle

with 5.86 Gear Ratio with Dana 70 Axle

with 3.73 Gear Ratio with Dana 60 Axle

For Dana 60; 5.13 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier

Dana 60 Axle w/3.54 Axle Ratio

with 3.55 Gear Ratio with Chrysler 9.25 Dual Drilled Axle

with 3.92 Gear Ratio with Chrysler 9.25 Dual Drilled Axle without Nut

Dana 60 Axle w/4.10 Axle Ratio

with 4.10 Gear Ratio with Dana 60 Axle

with 5.13 Gear Ratio with Dana Model 60 Axle

with 4.56 Gear Ratio with Dana 70 Axle

9.25 In. Ring Gear w/3.90 Axle Ratio

Dana 44; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; Standard Rotation; 4.88 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

with 3.54 Gear Ratio with Dana 70 Axle

9.25 In. Ring Gear w/3.55 Axle Ratio

For Chrysler 9.25" (12 Bolt); 4.56 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; Requires Notched Cross Pin Part# 80-0280-1 For Ring Gear Clearance; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 4.10 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.92 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.23 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

For Chrysler 9.25" (12 Bolt); 3.55 Ratio; Dual Drilled For 7/16" And 14mm Ring Gear Bolts; 2011 & Newer Models Require a 7/8" x 14 Thread Pinion Nut

Bolts Not Included with 3.73 Gear Ratio with Dana 60 Axle

For Dana 44; 5.89 Ratio; Thick Ring Gear; Requires 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

Dana 44; 4.88 Ratio Dana 44; Standard Rotation; 4.88 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

with 4.88 Gear Ratio with Dana Model 70 Axle

Bolts Not Included with 4.10 Gear Ratio with Dana 60 Axle

Dana 44; 3.73 Ratio Dana 44; Standard Rotation; 3.73 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; Standard Rotation; 3.08 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.08 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 3.92 Ratio Dana 44; Standard Rotation; 3.92 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.92 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Set~Dana 44; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier~Dana 44; Standard Rotation; 4.11 Ratio; Thick Ring/Pinion; 3.73-Down Carrier

Dana 44; 3.54 Ratio Dana 44; Standard Rotation; 3.54 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Dana 44; 4.11 Ratio Dana 44; Standard Rotation; 4.11 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; 26 Spline Pinion; Fits 4 Series Carrier

Dana 44; 3.31 Ratio Dana 44; Standard Rotation; 3.31 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 3.31 Ratio; 26 Spline Pinion; Fits 3 Series Carrier

Bolts Not Included with 5.38 Gear Ratio with Dana 60 Axle

with 4.56 Gear Ratio with Dana 60 Axle with Thick Gear

9.25 In. Ring Gear w/3.92 Axle Ratio

For Dana 70; 4.56 Ratio; Has 5/8" Offset Of Pinion; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier

Dana 44; 5.89 Ratio Dana 44; Standard Rotation; 5.89 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.89 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.13 Ratio Dana 44; Standard Rotation; 5.13 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For Dana 60; 4.56 Ratio; Thick Ring Gear; Requires a 4.10 and Numerically Lower Ratio Carrier; 1994-2002 Front Or Rear Dodge Ram Applications Requires Preload Shims Part# 1118

For Dana 60; 4.10 Ratio; Thin Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

Bolts Not Included with 7.17 Gear Ratio with Dana 60 Axle

For Dana 60; 4.56 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 5.13 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

Dana 60/Irregular Cover; 4.56 Ratio Dana 60; 4.56 Ratio~Dana 60; Standard Rotation; 4.56 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.56 Ratio; Fits 4 Series Carrier

Dana 60/Irregular Cover; 5.13 Ratio Dana 60; 5.13 Ratio~Dana 60; Standard Rotation; 5.13 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.13 Ratio; Fits 4 Series Carrier

Dana 60 Irregular Cover; Dana 60; 4.11 Ratio Dana 60; 4.11 Ratio~Dana 60; Standard Rotation; 4.11 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.11 Ratio; Fits 3 Series Carrier

Dana 60; 5.13 Gear Ratio Dana 60; 5.13 Ratio; Thick~Dana 60; Standard Rotation; 5.13 Ratio; Thick

High Performance Replacement; Dana 60; 5.38 Gear Ratio Dana 60; 5.38 Ratio~Dana 60; Standard Rotation; 5.38 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; Fits 4 Series Carrier

Dana 60; 4.56 Gear Ratio Dana 60; 4.56 Ratio~Dana 60; 4.56 Ratio; thick for 4.10 and down carrier~Dana 60; 4.56 Ratio;Dana 60; 4.56 Ratio. thick for 4.10 and down carrier~Dana 60; Standard Rotation; 4.56 Ratio~Dana 60; Standard Rotation; 4.56 Ratio;Dana 60; 4.56 Ratio. thick for 4.10 and down carrier

Dana 60; 4.88 Gear Ratio Dana 60; 4.88 Gear Ratio~Dana 60; Standard Rotation; 4.88 Gear Ratio~Dana 60; Standard Rotation; 4.88 Ratio; Thick Ring and Pinion Set; Fits 3 Series Carrier

For Dana 60; 4.88 Ratio; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 3.54 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

Bolts Not Included with 3.54 Gear Ratio with Dana 60 Axle

Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.88 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.88 Ratio

Dana 44; 4.56:1 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set Dana 44; Standard Rotation; 4.56 Ratio; 1.375 in. Pinion; 26 Spline; 8.500 in. Ring Gear; Thick; Set~Dana 44; Standard Rotation; 4.56 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 44; 5.38 Ratio Dana 44; Standard Rotation; 5.38 Ratio~Dana 44; Standard Rotation; Ring and Pinion Set; 5.38 Ratio; 26 Spline Pinion; Fits 4 Series Carrierr; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

Dana 60/Reverse; High Performance Replacement; 4.88 Gear Ratio Dana 60; High Performance Replacement; 4.88 Ratio~Dana 60; Standard Rotation; High Performance Replacement; 4.88 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.88 Ratio; Fits 4 Series Carrier

Dana 44; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt Dana 44; Standard Rotation; 5.13 Ratio; 3.73 And Down Carrier; Double Drilled Ring Gear Works w/3/8in. And 7/16in. Bolt~Dana 44; Standard Rotation; 5.13 Ratio; Thick Ring and Pinion Set; 26 Spline Pinion; Fits 3 Series Carrier; Double Drilled Ring Gear for 3/8in. and 7/16in. Bolts

For Dana 44; 5.13 Ratio; Thick Ring Gear; Requires a 3.73 and Numerically Lower Ratio Carrier; Dual Drilled for 3/8" and 7/16" Ring Gear Bolts

9.25 in. 12 Bolt; 3.21 Ratio; 29 Spline; 9.25 in. Ring Gear Diameter Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.21 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.21 Ratio; 29 Spline; 9.25 in. Ring Gear Diameter

9.25 in. 12 Bolt; 4.56 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.56 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.56 Ratio

9.25 in. 12 Bolt; 3.90 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.90 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.90 Ratio

For Dana 60; 3.73 Ratio; Requires a 4.10 and Numerically Lower Ratio Carrier

with 6.17 Gear Ratio with Dana 70 Axle

Dana 60/Irregular Cover; 6.17 Ratio Dana 60; 6.17 Ratio~Dana 60; Standard Rotation; 6.17 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 6.17 Ratio; Fits 4 Series Carrier

Dana 60/Irregular Cover; 4.10 And Down; 4.30 Ratio; Will Work w/4.27 in 4WD Dana 60; 4.10 And Down; 4.30 Ratio; Will Work w/4.27 in 4WD~Dana 60; Standard Rotation; 4.10 And Down; 4.30 Ratio; Will Work w/4.27 in 4WD~Dana 60; Standard Rotation; Ring and Pinion Set; 4.30 Ratio; Fits 3 Series Carrier; Will Work w/4.27 in 4WD

Dana 60/Irregular Cover; 5.86 Ratio Dana 60; 5.86 Ratio~Dana 60; Standard Rotation; 5.86 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 5.86 Ratio; Fits 4 Series Carrier

Dana 70; 5.13 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 5.13 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 5.13 Ratio; 5/8 in. Offset

Dana 70; 4.88 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.88 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 4.88 Ratio; 5/8 in. Offset

Dana 70; 4.56 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.56 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 4.56 Ratio; 5/8 in. Offset

Dana 70; 4.11 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 4.11 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 4.11 Ratio; 5/8 in. Offset

Dana 60; High Performance Replacement; 5.38 Gear Ratio; Thick Dana 60; High Performance Replacement; 5.38 Gear Ratio; Thick~Dana 60; Standard Rotation; High Performance Replacement; 5.38 Gear Ratio; Thick

For Chrysler 9.25" (12 Bolt); 3.91 Ratio; Will Not Fit 2011 & Newer Applications

For Chrysler 9.25" (12 Bolt); 3.55 Ratio; Will Not Fit 2011 & Newer Applications

For Chrysler 9.25" (12 Bolt); 4.10 Ratio; Will Not Fit 2011 & Newer Applications

Dana 60; 7.17 Ratio Dana 60; 7.17 Ratio~Dana 60; Standard Rotation; 7.17 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 7.17 Ratio; Fits 4 Series Carrier

For Chrysler 9.25" (12 Bolt); 4.56 Ratio; Requires Notched Cross Pin Part# 80-0280-1 For Ring Gear Clearance; Will Not Fit 2011 & Newer Applications

9.25 in. 12 Bolt; 3.55 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 3.55 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 3.55 Ratio

9.25 in. 12 Bolt; 4.11 Ratio Chrysler 9.25 in. Rear; Ring and Pinion Set; 4.11 Ratio; 29 Spline Pinion~Chrysler 9.25 in.; 4.11 Ratio

Dana 60/Irregular Cover; 3.73 Ratio Dana 60; 3.73 Ratio~Dana 60; Standard Rotation; 3.73 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 3.73 Ratio; Fits 3 Series Carrier

Bolts Not Included with 6.17 Gear Ratio with Dana 60 Axle

Dana 70; 4.56 Ratio; 5/8 in. Offset; Thick Gear For 4.10 And Down Carrier Dana 70 Rear; Thick Ring and Pinion Set; 4.56 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 4.56 Ratio; 5/8 in. Offset; Thick Gear For 4.10 And Down Carrier

Dana 60/Irregular Cover; 3.54 Ratio Dana 60; 3.54 Ratio~Dana 60; Standard Rotation; 3.54 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 3.54 Ratio; Fits 3 Series Carrier

Dana 70; 7.17 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 7.17 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 4 Series 4.56 & Up Carrier~Dana 70 U; 7.17 Ratio; 5/8 in. Offset

For Dana 60; 4.56 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 5.38 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 4.10 Ratio; Thin Ring Gear; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 4.88 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

For Dana 60; 6.17 Ratio; Pro Gear; Requires a 4.56 and Numerically Higher Ratio Carrier

Dana 70; 3.73 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 3.73 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 3.73 Ratio; 5/8 in. Offset

Dana 70; 3.54 Ratio; 5/8 in. Offset Dana 70 Rear; Ring and Pinion Set; 3.54 Ratio; 5/8 in. Offset; 29 Spline Pinion; Fits 3 Series 4.10 & Down Carrier~Dana 70 U; 3.54 Ratio; 5/8 in. Offset

with Thick Gear with 4.10 Gear Ratio and Down Carriers with 4.88 Gear Ratio with Dana 60 Axle

Bolts Not Included with 5.86 Gear Ratio with Dana 60 Axle

with 5.13 Gear Ratio with Dana 60 Axle with Thick Gear

Dana 60; 4.09 Ratio Dana 60; 4.09 Ratio~Dana 60; Standard Rotation; Ring and Pinion Set; 4.09 Ratio; Fits 3 Series Carrier