Ford E-150 Differential Replacement

Dana 60/70/70U/70HD Dana 60~Outer slinger; 2.250 in. O.D.

Dana 60 Reverse Dana 60~Inner slinger; 4.496 in. O.D.

9 in./7.5in./8.8 in. 10 Bolt Ford 8.8 in.

Dana 30/60 Reverse; AMC 35/20; Dana 44/35; Bulkhead Quick-Disconnect Fitting Dana 60; Bulkhead Quick-Disconnect Fitting

Ford 9.75 in.; Outer Slinger Ford 9.75 in.; Outer Slinger

Dana 60 Dana 50.60.& 70; Nodular Iron Differential Cover; Fits standard and reverse rotation; 10 Bolt; Includes Cover Bolts and Magnetic Drain Plugs~Dana 60

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.

31 Spline; 1.32 in. Axle Shaft Diameter; 8.8 in.; All Ratios

34 Spline; 1.37 in. Axle Shaft Diameter; All Ratios; Rear 9.75 in.

8.8 in. 10 Bolt; 31 Spline; w/Carbon Fiber Clutches Ford 8.8 in.; 31 Spline; w/Carbon Fiber Clutches

28 Spline; 1.20 in. Axle Shaft Diameter; Rear 8.8 in.

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; Rear 10.25 in./10.5 in.

Duragrip; 31 Spline Ford 8.8 in.; Duragrip; 31 Spline~Yukon Dura Grip Positraction; Ford 8.8 in. Rear; 31 Spline; Limited Slip

37 Spline; 1.60 in. Axle Shaft Diameter; 3.73 And Down Ring Gear Pinion Ratio; Rear Dana 80

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; Dana 60HD; Dana 60

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Dana 80; Rear Dana 80

31 Spline; 1.32 in. Axle Shaft Diameter; 4.56/4.88/5.13 Gear Ratios May Require Modification For Install; 8.8 in.

9.75 in. 12 Bolt; 34 Spline Axles Ford 9.75 in.; 34 Spline Axles~Yukon Dura Grip Positraction; Ford 9.75 in. Rear; Limited Slip; 34 Spline

Dana 60; 35 Spline; 4.10 And Down~Yukon Dura Grip positraction; Dana 60 Rear; 35 spline; Full Float Axle. 4.10 and Down Ratio or Thick Gears

Dana 60; 35 Spline; 4.56 And Up~Yukon Dura Grip Positraction; Dana 60; 35 spline; 4.56 and Up; 4 Pinion Design; w/o C-clips

35 Spline; 4.10 And Down Dana 60; 35 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

35 Spline; 1.50 in. Axle Shaft Diameter; Full Float Only; All Ratios; Rear 10.25 in./10.5 in.

Dana 60/Reverse; 35 Spline; 4.56 And Up Dana 60; 35 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; 35 Spline; 4.56 And Up; w/ Full Float Axle

Dana 60; 40 Spline; 4.10 And Down Dana 60; 40 Spline; 4.10 And Down~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline Upgrade; 4.10 and Down or Thick Gear Ratios; w/ Full Float Axle

8.8 in. 10 Bolt; 31 Spline; Rear Ford 8.8 in.; 31 Spline; Rear~Ford 8.8 in. Rear; Yukon Grizzly Locker; 31 Spline; .875 in. Diameter Cross Pin

35 Spline; 1.60 in. Axle Shaft Diameter; 4.10 And Up Ring Gear Pinion Ratio; Rear Dana 80

35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; Dana 60HD

34 Spline; 1.37 in. Axle Shaft Diameter; Rear 9.75 in.; All Ratios

40 Spline; 4.56 And Up Dana 60; 40 Spline; 4.56 And Up~Dana 60; Yukon Grizzly Locker; Aftermarket 40 Spline; 4.56 And Up; w/ Full Float Axle

Axle: Ford 8.8 IFS Shaft: 1.20" Spline: 28 Ratio: All

Axle: Ford 8.8 Shaft: 1.32" Spline: 31 Ratio: All Confirm axle is 8.8"

Competition Only; 35 Spline Axles; 4.56 And Up Dana 60; Competition Only; 35 Spline Axles; 4.56 And Up

Competition Only; 35 Spline Axles; 4.10 And Down Dana 60; Competition Only; 35 Spline Axles; 4.10 And Down

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not full float

Axle: 9.75 Inch Position: Rear Shaft: 1.37 Inch Spline: 34 Ratio: All Confirm axle is 9.75 Inch

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not c-clip

Axle: Sterling 10.25"/10.50" Shaft: 1.50" Spline: 35 Ratio: All Confirm axle is Sterling 10.25"/10.5"

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.10 and down Confirm axle is not full float

Axle: Dana 60 Shaft: 1.50" Spline: 35 Ratio: 4.56 and up Confirm axle is not c-clip

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.56 And Up Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

Dana 60 Performance; 35 Spline; 1.50 in. Axle Shaft Diameter; 4.10 And Down Ring Gear Pinion Ratio; 9.75 in. Ring Gear Diameter

35 Spline; 4.56 Ratio And Up Dana 60; 35 Spline; 4.56 Ratio And Up

Dana 60/Reverse; 35 Spline; 4.10 Ratio And Down Dana 60; 35 Spline; 4.10 Ratio And Down

31 Spline; 1.32 in. Axle Shaft Diameter; All Ratios; Rear 8.8 in.

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 28 Spline; Can Be Used w/IFS And IRS 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline 8.8 in. (10 Bolt)

Selectable Full Locker w/Limited Slip; For Use w/All Ratios; 31 Spline; For Use w/IRS Only 8.8 in. (10 Bolt)